File:ISS S3 truss manufacturing at Boeing facilities, Huntington Beach, October 1997.jpg

Page contents not supported in other languages.
This is a file from the Wikimedia Commons
From Wikipedia, the free encyclopedia

Original file ‎(1,536 × 1,234 pixels, file size: 804 KB, MIME type: image/jpeg)

Summary

Description
English: 97-17421 (December 10, 1997) --- An aluminum bulkhead of the center truss segment test article for the International Space Station completes machining at Boeing facilities in Huntington Beach, California, in October 1997. The bulkheads are coupled with longerons to make up the 43-foot-long center truss segment, designated the S0 truss segment. Nine such segments will eventually make up the 360-foot long truss for the station that will hold the four massive U.S. solar arrays, cooling radiators, associated electronics and batteries, and connecting lines. The S0 truss segment will be anchored atop the U.S. Laboratory module when it is launched in early 2000 on Space Shuttle mission STS-105.
Date Taken in October 1997
Source https://www.flickr.com/photos/nasa2explore/9472287195/
Author NASA Johnson

Licensing

This image or video was catalogued by Johnson Space Center of the United States National Aeronautics and Space Administration (NASA) under Photo ID: 97-17421.

This tag does not indicate the copyright status of the attached work. A normal copyright tag is still required. See Commons:Licensing.
Other languages:

العربية ∙ беларуская (тарашкевіца) ∙ български ∙ català ∙ čeština ∙ dansk ∙ Deutsch ∙ English ∙ español ∙ فارسی ∙ français ∙ galego ∙ magyar ∙ հայերեն ∙ Bahasa Indonesia ∙ italiano ∙ 日本語 ∙ македонски ∙ മലയാളം ∙ Nederlands ∙ polski ∙ português ∙ русский ∙ sicilianu ∙ slovenščina ∙ Türkçe ∙ українська ∙ 简体中文 ∙ 繁體中文 ∙ +/−

Public domain This file is in the public domain in the United States because it was solely created by NASA. NASA copyright policy states that "NASA material is not protected by copyright unless noted". (See Template:PD-USGov, NASA copyright policy page or JPL Image Use Policy.)
Warnings:

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

Integrated Truss Structure

inception

November 1997

coordinates of the point of view

30°1'23.945"N, 89°55'2.867"W

MIME type

image/jpeg

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current04:30, 25 October 2023Thumbnail for version as of 04:30, 25 October 20231,536 × 1,234 (804 KB)Adeletron 3030Original
00:53, 21 October 2019Thumbnail for version as of 00:53, 21 October 20191,536 × 1,234 (512 KB)InfrogmationUser created page with UploadWizard
The following pages on the English Wikipedia use this file (pages on other projects are not listed):

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "https://en.wikipedia.org/wiki/File:ISS_S3_truss_manufacturing_at_Boeing_facilities,_Huntington_Beach,_October_1997.jpg"