File:Transformer3d col.svg

From Wikipedia, the free encyclopedia

Original file(SVG file, nominally 750 × 563 pixels, file size: 35 KB)

The arrows are not correct. See Talk:Transformer#Diagram_Error_-_Polarity.2FPhase_of_secondary_coil and Image:Transformer3d col3.svg. — Omegatron 17:53, 2 September 2006 (UTC)


File information
Description

Idealised single-phase transformer showing the path of magnetic flux through the core. Magnetic flux is produced by the primary winding, and contained by the high permeability core, links the secondary winding. The mutual inductance between the two windings results in an induced voltage on the secondary side, whose magnitude is determined by the ratio of turns between the two windings. A transformer has two coils, primary and secondary. The primary coil receives the input voltage, whereas, the secondary coil produces the output voltage.

Reference

Daniels, A (1976). Introduction to Electrical Machines. Macmillan Publishers. ISBN 0-333-19627-9.

Source

Created in Inkscape.

Date
Author
Permission
(Reusing this file)

See below.



File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current13:16, 31 December 2005Thumbnail for version as of 13:16, 31 December 2005750 × 563 (35 KB)BillC (talk | contribs)Idealised single-phase transformer showing path of magnetic flux through the core. Created in Inkscape. {{GFDL-self}}
The following pages on the English Wikipedia use this file (pages on other projects are not listed):