menuconfig

From Wikipedia, the free encyclopedia
Written inC
Operating systemLinux
Typebuild automation tool
LicenseGNU General Public License
Websitewww.kernel.org

make menuconfig is one of five similar tools that can configure Linux source, a necessary early step needed to compile the source code. make menuconfig, with a menu-driven user interface, allows the user to choose the features of Linux (and other options) that will be compiled. It is normally invoked using the command make menuconfig; menuconfig is a target in Linux Makefile.

Overview[edit]

make menuconfig was not in the first version of Linux. The predecessor tool is a question-and-answer-based utility (make config, make oldconfig).

Variations of the tool tool for Linux configuration include:

  • make xconfig, which requires Qt
  • make gconfig, which uses GTK+
  • make nconfig, which is similar to make menuconfig.

All these tools use the Kconfig language internally. Kconfig is also used in other projects, such as Das U-Boot, a bootloader for embedded devices, Buildroot, a tool for generating embedded Linux systems, and BusyBox, a single-executable shell utility toolbox for embedded systems.

Advantages over earlier versions[edit]

Despite being a simple design, make menuconfig offers considerable advantages to the question-and-answer-based configuration tool make oldconfig, the most notable being a basic search system and the ability to load and save files with filenames different from ".config". make menuconfig gives the user an ability to navigate forwards or backwards directly between features, rather than using make config by pressing the ↵ Enter key to navigate linearly to the configuration for a specific feature.

If the user is satisfied with a previous .config file, using make oldconfig uses this previous file to answer all questions that it can, only interactively presenting the new features. This is intended for a version upgrade, but may be appropriate at other times.

make menuconfig is a light load on system resources unlike make xconfig (uses Qt as of version 2.6.31.1, formerly Tk) or make gconfig, which utilizes GTK+. It's possible to ignore most of the features with make config, and doing so makes it more likely that one will configure an incomplete or oversized kernel. It's recommended to start with the .config file included with Linux distribution, which makes it easier to configure a custom kernel.

Better than editing the .config by hand, make menuconfig shows the descriptions of each feature (by pressing the "Help" button while on a menu option), and adds some (primitive in version 2.6.31.1) dependency checking. With make oldconfig, dependency checking can be done in one step, but requires the user to locate the features that were changed, by hand, to be sure that the needed ones are still enabled.

Practically, using both make menuconfig and make oldconfig, diff, (also cvs and a decent text editor) provides the most flexibility and most dependability. Configuring Linux is a significant labor, so users are strongly advised to make backups of it (i.e. cp /usr/src/linux*/.config ~/savemywork.config).

The help information is distributed throughout the kernel source tree in the various files called Kconfig.

Dependencies[edit]

To use make menuconfig, Linux source is a requirement, a make tool, a C compiler, and the ncurses library.

Key strokes[edit]

Main Key strokes
Key stroke Meaning
? Option description and tips/Help
PgUpPgDn Navigate through the kernel features and menuconfig commands.
Esc+Esc Exit menuconfig or cancel the command.
↵ Enter Activate a command, or expand a branch.
y Compile and include this feature inside of the kernel.
m Compile this feature as a module, separate from the kernel.
n Do not compile the feature.
/ Search configuration parameter.

Symbols[edit]

To the left of the features is the setting (y, M, or empty) enclosed in two punctuation marks.

Dependency information
Symbol Meaning
< > No dependencies.
[ ] A dependency requires this to be compiled-in (y), or not compiled (n).
{ } A dependency requires this to be a module (m) or compiled-in (y).
- - A dependency requires this to be compiled-in (y).

Note that the supplied dependency information is primitive, it does not tell you the names of the dependant features.

Other symbols
Symbol Meaning
---> Use ↵ Enter to expand this branch as a new window.
(Experimental) Unstable/lesser code, beware.
(New) An option not in an older version of Linux.
(Deprecated) An option that will be removed in future versions.

menuconfig in the kernel-build workflow[edit]

The user is encouraged to read the Linux README, since there are also many other make targets (beyond modules_install and install). Each will configure the kernel, but with different features activated, or using a different interactive interface; such as tinyconfig or allyesconfig.

simple (but effective) workflow[edit]

  1. make menuconfig
  2. Next build the compressed kernel and its modules, a long process. make.
  3. Install using your favorite method such as make modules_install, make install.

See also[edit]

References[edit]

External links[edit]