Reverse DNS lookup
This article needs additional citations for verification. (September 2016) (Learn how and when to remove this template message)
In computer networks, a reverse DNS lookup or reverse DNS resolution (rDNS) is the querying of the Domain Name System (DNS) to determine the domain name associated with an IP address – the reverse of the usual "forward" DNS lookup of an IP address from a domain name. The process of reverse resolving an IP address uses PTR records. The reverse DNS database of the Internet is rooted in the arpa top-level domain.
Although the informational RFC 1912 (Section 2.1) recommends that "every Internet-reachable host should have a name" and that "for every IP address, there should be a matching PTR record," it is not an Internet Standard requirement, and not all IP addresses have a reverse entry.
Inverse queries take the form of a single RR in the answer section of the message, with an empty question section. The owner name of the query RR and its TTL are not significant. The response carries questions in the question section which identify all names possessing the query RR which the name server knows. Since no name server knows about all of the domain name space, the response can never be assumed to be complete. Thus inverse queries are primarily useful for database management and debugging activities. Inverse queries are not an acceptable method of mapping host addresses to host names; use the
IPv4 reverse resolution
Reverse DNS lookups for IPv4 addresses use the special domain
in-addr.arpa. In this domain, an IPv4 address is represented as a concatenated sequence of four decimal numbers, separated by dots, to which is appended the second level domain suffix
.in-addr.arpa. The four decimal numbers are obtained by splitting the 32-bit IPv4 address into four octets and converting each octet into a decimal number. These decimal numbers are then concatenated in the order: least significant octet first (leftmost), to most significant octet last (rightmost). It is important to note that this is the reverse order to the usual dotted-decimal convention for writing IPv4 addresses in textual form.
For example, to do a reverse lookup of the IP address
220.127.116.11 the PTR record for the domain name
18.104.22.168.in-addr.arpa would be looked up, and found to point to
Classless reverse DNS method
Historically, Internet registries and Internet service providers allocated IP addresses in blocks of 256 (for Class C) or larger octet-based blocks for classes B and A. By definition, each block fell upon an octet boundary. The structure of the reverse DNS domain was based on this definition. However, with the introduction of Classless Inter-Domain Routing, IP addresses were allocated in much smaller blocks, and hence the original design of pointer records was impractical, since autonomy of administration of smaller blocks could not be granted. RFC 2317 devised a methodology to address this problem by using CNAME records.
IPv6 reverse resolution
Reverse DNS lookups for IPv6 addresses use the special domain
ip6.int). An IPv6 address appears as a name in this domain as a sequence of nibbles in reverse order, represented as hexadecimal digits as subdomains. For example, the pointer domain name corresponding to the IPv6 address
Multiple pointer records
While most rDNS entries only have one PTR record, DNS does not restrict the number. Multiple PTR records are used, for example, when a web server supports many virtual hosts— i.e. multiple hostnames then resolve to a single address, and multiple hostnames will be returned for a PTR lookup for that shared address. However, DNS lookups typically occur over UDP, and since UDP has a limited message size, in extreme cases, multiple PTRs could cause a DNS response to exceed those UDP limits.
Records other than PTR records
Record types other than PTR records may also appear in the reverse DNS tree. For example, encryption keys may be placed there for IPsec, SSH and IKE. DNS-Based Service Discovery uses specially-named records in the reverse DNS tree to provide hints to clients about subnet-specific service discovery domains. Less standardized usages include comments placed in TXT records and LOC records to identify the geophysical location of an IP address.
The most common uses of the reverse DNS include:
- The original use of the rDNS: network troubleshooting via tools such as traceroute, ping, and the "Received:" trace header field for SMTP e-mail, web sites tracking users (especially on Internet forums), etc.
- One e-mail anti-spam technique: checking the domain names in the rDNS to see if they are likely from dialup users, or dynamically assigned addresses unlikely to be used by legitimate mail servers. Owners of such IP addresses typically assign them generic rDNS names such as "1-2-3-4-dynamic-ip.example.com." Some anti-spam filters assume that email that originates from such addresses is likely to be spam, and may refuse connection.
- A forward-confirmed reverse DNS (FCrDNS) verification can create a form of authentication showing a valid relationship between the owner of a domain name and the owner of the server that has been given an IP address. While not very thorough, this validation is strong enough to often be used for whitelisting purposes, since spammers and phishers usually cannot achieve forward validation when they use zombie computers to forge domain records.
- System logging or monitoring tools often receive entries with the relevant devices specified only by IP addresses. To provide more human-usable data, these programs often perform a reverse lookup before writing the log, thus writing a name rather than the IP address.
- "RFC 1912 — Common DNS Operational and Configuration Errors". February 1996. Retrieved 2017-12-28.
- "RFC 3425 — Obsoleting IQUERY". November 2002. Retrieved 2017-12-28.
- "RFC 1035 — Domain names - implementation and specification". November 1987. Retrieved 2017-12-28.
- RFC 4159
- RFC 6763, IETF
- spamhaus's FAQ
- reference page from AOL Archived December 10, 2006, at the Wayback Machine.