Telephone keypad

From Wikipedia, the free encyclopedia
A telephone keypad using the ITU E.161 standard.

A telephone keypad is a keypad installed on a push-button telephone or similar telecommunication device for dialing a telephone number. It was standardized when the dual-tone multi-frequency signaling (DTMF) system was developed in the Bell System in the United States in the 1960s that replaced rotary dialing originally developed in electromechanical switching systems.[1] Because of the installed abundance of rotary dial equipment well into the 1990s, many telephone keypads were also designed to produce loop-disconnect pulses electronically, and some could be optionally switched to produce either DTMF or pulses.

The development of the modern telephone keypad is attributed to research in the 1950s by Richard Deininger under the directorship of John Karlin at the Human Factors Engineering Department of Bell Labs.[2][3] The modern keypad is laid out in a rectangular array of twelve push buttons arranged as four rows and three columns of keys. For military applications, a fourth, right-most column of keys was added for priority signaling in the Autovon system in the 1960s. Initially, between 1963 and 1968, the keypads for civilian subscriber service omitting the lower left and lower right keys that commonly are assigned to the star (✻) and number sign (#) signals, respectively. These keys were added to provide signals for anticipated data entry purposes in business applications, but found use in Custom Calling Services (CLASS) features installed in electronic switching systems.[4]

Layout[edit]

Telephone with letters on its rotary dial (1950s, UK)

The layout of the digit keys is different from that commonly appearing on calculators and numeric keypads. This layout was chosen after extensive human factors testing at Bell Labs.[3][5] At the time (late 1950s), mechanical calculators were not widespread, and few people had experience with them.[6] Indeed, calculators were only just starting to settle on a common layout; a 1955 paper states "Of the several calculating devices we have been able to look at... Two other calculators have keysets resembling [the layout that would become the most common layout].... Most other calculators have their keys reading upward in vertical rows of ten,"[5] while a 1960 paper, just five years later, refers to today's common calculator layout as "the arrangement frequently found in ten-key adding machines".[3] In any case, Bell Labs testing found that the telephone layout with 1, 2, and 3 in the top row, was slightly faster than the calculator layout with them in the bottom row.

British GPO 726 telephone of 1967

The key labeled ✻ was officially named the "star" key. The key labeled # is officially called the "number sign" key, but other names such as "pound", "hash", "hex", "octothorpe", "gate", "lattice", and "square", are common, depending on national or personal preference. The Greek symbols alpha and omega had been planned originally.[7]

These can be used for special functions. For example, in the UK, users can order a 7:30 am alarm call from a BT telephone exchange by dialing: ✻55✻0730#.[8]

Most of the keys also bear letters according to the following system:

A standard telephone keypad
Number Letter
0 none (on some telephones, "OPERATOR" or "OPER")
1 none (on some older telephones, QZ)
2 ABC
3 DEF
4 GHI
5 JKL
6 MNO (on some older telephones, MN)
7 PQRS (on older telephones, PRS)
8 TUV
9 WXYZ (on older telephones, WXY)

These letters have been used for multiple purposes. Originally, they referred to the leading letters of telephone exchange names. In the mid-20th century United States, before the switch to All-Number Calling, telephone numbers had seven digits including a two-digit prefix which was expressed in letters rather than digits, e.g.; KL5-5445. The UK telephone numbering system used a similar two-letter code after the initial zero to form the first part of the subscriber trunk dialling code for a region. For example, Aylesbury was assigned 0AY6, which translated into 0296.

The official toll-free hotline for the California Department of Transportation's Adopt-a-Highway program is 1-866-236-7824, but signs advertise the number as 1-866-ADOPTAHWY, with two extra digits, for memorability.

The letters have also been used, mainly in the United States, as a technique for remembering telephone numbers easily. For example, an interior decorator might license the telephone number 1-800-724-6837, but advertise it as the more memorable phoneword 1-800-PAINTER. Sometimes businesses advertise a number with a mnemonic word having more letters than there are digits in the phone number. Usually, this means that the caller just stops dialing at seven digits after the area code or that the extra digits are ignored by the central office.

In feature phones the letters on the keys are used for text entry tasks such as text messaging, entering names in the phone book, and browsing the web. To compensate for the smaller number of keys, phones used multi-tap and later predictive text processing to speed up the process. Touchscreen phones have made these input methods obsolete, as screens are typically large enough to show as many virtual buttons as necessary for full text entry.

Key tones[edit]

Pressing a single key of a traditional analog telephone keypad produces a telephony signaling event to the remote switching system. For touchtone service, the signal is a dual-tone multi-frequency signaling tone consisting of two simultaneous pure tone sinusoidal frequencies. The row in which the key appears determines the low-frequency component, and the column determines the high-frequency component. For example, pressing key 1 results in a signal composed of tones with frequencies 697 hertz (Hz) and 1209 Hz.

DTMF keypad frequencies (with sound clips)
1209 Hz 1336 Hz 1477 Hz 1633 Hz
697 Hz 1 2 3 A
770 Hz 4 5 6 B
852 Hz 7 8 9 C
941 Hz 0 # D

Letter mapping[edit]

A mobile phone keypad with Latin and Japanese characters.

In the course of telephone history, the positions of telephone dials, as well as keypads have been associated with various patterns of mapping letters and characters to numbers (keyboard layout).

The system used in Denmark[failed verification] was different from that used in the U.K., which was different from the U.S. and Australia.[9] The use of alphanumeric codes for exchanges was abandoned in Europe when international direct dialing was introduced in the 1960s, because, for example, dialing VIC 8900 on a Danish telephone would result in a different number to dialling it on a British telephone. At the same time letters were no longer placed on the dials of new telephones.

Letters did not re-appear on phones in Europe until the introduction of mobile phones, and the layout followed the new international standard ITU E.161/ISO 9995-8. The ITU established an international standard (ITU E.161) in the mid-1990s, and that should be the layout used for any new devices.[10] There is a standard, ETSI ES 202 130, that covers European languages and other languages used in Europe, published by the independent ETSI organisation in 2003[11] and updated in 2007.[12] Work describing some principles of the standard is available.[13]

Since many newer smartphones, such as the Palm Treo and BlackBerry, have full alphanumeric keyboards instead of the traditional telephone keypads, the user must execute additional steps to dial a number containing convenience letters. On certain BlackBerry devices, a user can press the Alt key, followed by the desired letter, and the device will generate the appropriate DTMF tone.[14]

See also[edit]

References[edit]

  1. ^ Agogino, Alice (November 18, 2009). "Engineering Education "Today in History" Blog: Bell Telephone introduces push button telephone". Engineering Pathway. Archived from the original on January 27, 2013.
  2. ^ B.L. Hanson, A Brief History of Applied Behavioral Science at Bell Laboratories, Bell System Technical Journal 62(6) 1571–1590 (July–August 1983), p.1578
  3. ^ a b c Deininger, R. L. (1960-02-16). "Human Factors Engineering Studies of the Design and Use of Pushbutton Telephone Sets". Bell System Technical Journal. 39 (4): 995–1012. doi:10.1002/j.1538-7305.1960.tb04447.x.
  4. ^ D.P. Worrall, New Custom Calling Services, Bell System Technical Journal 61(5) 821–839 (May–June 1982)
  5. ^ a b Lutz, Mary Champion; Chapanis, Alphonse (October 1955). "Expected Locations of Digits and Letters on Ten-Button Keysets". Journal of Applied Psychology. 39 (5): 314–317. doi:10.1037/h0048722.
  6. ^ Brady Haran (producer), Sarah Wiseman (interviewee) (2013-08-29). Phone Numbers - Numberphile. Archived from the original on 2021-12-12. Retrieved 2016-05-11.
  7. ^ Koten, John F., " *# ", WSJ.Money Magazine, Issue 5, p. 22 (Spring 2014). The star and number sign were likely first suggested by John A. "Jack" Koten (1929-2014), a corporate communications specialist with Bell Labs in Chicago, reasoning that the new keys would be easier to explain to a public already familiar with typewriter symbols.
  8. ^ "Reminder Call Instructions | BT Business".
  9. ^ Phone Key Pads Archived 2015-03-15 at the Wayback Machine
  10. ^ E.161 : Arrangement of digits, letters and symbols on telephones and other devices that can be used for gaining access to a telephone network
  11. ^ ETSI (2003-10-29), ETSI ES 202 130 Ver. 1.1.1: Human Factors (HF); User Interfaces; Character repertoires, ordering rules and assignments to the 12-key telephone keypad, ETSI, retrieved 2011-11-03
  12. ^ ETSI (2007-09-06), ETSI ES 202 130 Ver. 2.1.2: Human Factors (HF); User Interfaces; Character repertoires, orderings and assignments to the 12-key telephone keypad (for European languages and other languages used in Europe), ETSI
  13. ^ Böcker, Martin; von Niman, Bruno; Larsson, Karl Ivar (2006-09-01), "Increasing text-entry usability in mobile devices for languages used in Europe", Interactions, 13 (5): 30, CiteSeerX 10.1.1.125.7511, doi:10.1145/1151314.1151336, ISSN 1072-5520, S2CID 20736144
  14. ^ Blackberry Tips, PC World, October 2005.