Jump to content

802.11 frame types

From Wikipedia, the free encyclopedia
(Redirected from 802.11 Frame Types)

In the IEEE 802.11 wireless LAN protocols (such as Wi-Fi), a MAC frame is constructed of common fields (which are present in all types of frames) and specific fields (present in certain cases, depending on the type and subtype specified in the first octet of the frame).

Generic 802.11 Frame

The very first two octets transmitted by a station are the Frame Control. The first three subfields within the frame control and the last field (FCS) are always present in all types of 802.11 frames. These three subfields consist of two bits Protocol Version subfield, two bits Type subfield, and four bits Subtype subfield.

Frame control

[edit]
802.11 Frame Control Field

The first three fields (Protocol Version, Type and Subtype) in the Frame Control field are always present. The fields, in their order of appearance in transmission, are:

  1. Protocol Version
  2. Type
  3. Subtype
  4. To-DS
  5. From-DS
  6. More-Fragments
  7. Retry
  8. Power Management
  9. More Data
  10. Protected frame
  11. +HTC/order

Protocol version subfield

[edit]

The two-bit protocol version subfield is set to 0 for WLAN (PV0) and 1 for IEEE 802.11ah (PV1). The revision level is incremented only when there is a fundamental incompatibility between two versions of the standard.[1][2] PV1 description is incorporated in the latest 802.11-2020 standard.

Types and subtypes

[edit]
Various 802.11 frame types and subtypes
Type value

(bits 3–2)

Type

description

Subtype value

(bits 7–4)

Subtype description
00 Management 0000 Association Request
00 Management 0001 Association Response
00 Management 0010 Reassociation Request
00 Management 0011 Reassociation Response
00 Management 0100 Probe Request
00 Management 0101 Probe Response
00 Management 0110 Timing Advertisement
00 Management 0111 Reserved
00 Management 1000 Beacon
00 Management 1001 ATIM
00 Management 1010 Disassociation
00 Management 1011 Authentication
00 Management 1100 Deauthentication
00 Management 1101 Action
00 Management 1110 Action No Ack (NACK)
00 Management 1111 Reserved
01 Control 0000–0001 Reserved
01 Control 0010 Trigger[3]
01 Control 0011 TACK
01 Control 0100 Beamforming Report Poll
01 Control 0101 VHT/HE NDP Announcement
01 Control 0110 Control Frame Extension
01 Control 0111 Control Wrapper
01 Control 1000 Block Ack Request (BAR)
01 Control 1001 Block Ack (BA)
01 Control 1010 PS-Poll
01 Control 1011 RTS
01 Control 1100 CTS
01 Control 1101 ACK
01 Control 1110 CF-End
01 Control 1111 CF-End + CF-ACK
10 Data 0000 Data
10 Data 0001–0011 Reserved
10 Data 0100 Null (no data)
10 Data 0101–0111 Reserved
10 Data 1000 QoS Data
10 Data 1001 QoS Data + CF-ACK
10 Data 1010 QoS Data + CF-Poll
10 Data 1011 QoS Data + CF-ACK + CF-Poll
10 Data 1100 QoS Null (no data)
10 Data 1101 Reserved
10 Data 1110 QoS CF-Poll (no data)
10 Data 1111 QoS CF-ACK + CF-Poll (no data)
11 Extension 0000 DMG Beacon
11 Extension 0001 S1G Beacon
11 Extension 0010–1111 Reserved

ToDS and FromDS

[edit]

ToDS is one bit in length and set to 1 if destined to Distribution System,[4] while FromDS is a one-bit length that is set to 1 if originated from Distribution System.[4]

Retry

[edit]

Set to 1 if the Data or Management frame is part retransmission of the earlier frame. This bit is reused for different purpose in Control frame.

Protected frame

[edit]

Set to 1 if the Management Frame is protected by encryption as described in IEEE_802.11w-2009.

+HTC/order

[edit]

It is one bit in length and is used for two purposes:

  • It is set to 1 in a non-QoS data frame transmitted by a non-QoS WLAN station to indicate the frame being transmitted is using Strictly-Ordered service class (this use is obsolete and will be removed from the future 802.11 Standard).
  • It is set to 1 in a QoS data or management frame transmitting at HT or higher rate to indicate that the frame contains HT Control field (see above)

References

[edit]
  1. ^ "802.11 frames : A starter guide to learn wireless sniffer traces". community.cisco.com. October 25, 2010. Retrieved February 20, 2019.
  2. ^ 802.11 Working Group. "Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications". 2016. New York, NY: IEEE: 638. {{cite journal}}: Cite journal requires |journal= (help)CS1 maint: numeric names: authors list (link)
  3. ^ LAN/MAN Standards Committee (February 9, 2021). IEEE Standard for Information Technology--Telecommunications and Information Exchange between Systems Local and Metropolitan Area Networks--Specific Requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 1: Enhancements for High-Efficiency WLAN. New York, NY: IEEE Standards Association. p. 76. doi:10.1109/IEEESTD.2021.9442429. ISBN 978-1-5044-7390-3.
  4. ^ a b Rapp, Dale (May 17, 2014). "THE TO DS AND FROM DS FIELDS". DALESWIFISEC. Retrieved August 13, 2019.