Jump to content

Lanthanide trichloride

From Wikipedia, the free encyclopedia
(Redirected from Ammonium chloride route)

Lanthanide trichlorides are a family of inorganic compound with the formula LnCl3, where Ln stands for a lanthanide metal. The trichlorides are standard reagents in applied and academic chemistry of the lanthanides. They exist as anhydrous solids and as hydrates.

Properties

[edit]

The anhydrous solids have melting points range from ca. 582 (Tb) - 925 °C (Lu). They are generally pale colored, often white. As coordination polymers, they only dissolve in donor solvents, including water.

Lanthanide trichlorides[1]
MCl3 color structure type f-configuration comment
ScCl3 colorless AlCl3-type f0 not classified as a lanthanide usually
YCl3 colorless AlCl3-type f0 not classified as a lanthanide usually
LaCl3 colorless UCl3-type f0 diamagnetic
CeCl3 colorless UCl3-type f1, doublet -
PrCl3 green UCl3-type f2, triplet -
NdCl3 pink UCl3-type f3, quartet -
PmCl3 green UCl3-type f4, quintet radioactive
SmCl3 yellow UCl3-type f5, sextet -
EuCl3 yellow UCl3-type f6, septet -
GdCl3 colorless UCl3-type f7, octet symmetrical electronic shell
TbCl3 white PuBr3-type f8, septet -
DyCl3 white AlCl3-type f9, sextet -
HoCl3 yellow AlCl3-type f10, quintet -
ErCl3 violet AlCl3-type f11, quartet -
TmCl3 yellow AlCl3-type f12, triplet -
YbCl3 colorless YCl3-type f13, doublet -
LuCl3 colorless AlCl3-type f14 diamagnetic

Preparation

[edit]

The lanthanide oxides and carbonates dissolve in hydrochloric acid to give chloride salt of the hydrated cations:

M2O3 + 6 HCl + n H2O → 2 [Ln(H2O)n]Cl3

Industrial routes

[edit]

Anhydrous trichlorides are produced commercially by carbothermic reaction of the oxide:[2]

M2O3 + 3 Cl2 + 3 C → 2 MCl3 + 3 CO

Ammonium chloride route

[edit]

The ammonium chloride route refers to a general procedure to produce anhydrous lanthanide chlorides. The method has the advantages of being general for the 14 lanthanides and it produces air-stable intermediates that resist hydrolysis. The use of ammonium chloride as a reagent is convenient because the salt is anhydrous, even when handled in air. Ammonium chloride is also attractive because it thermally decomposes to volatile products at temperatures compatible with the stability of the trichloride targets.[3][4][5]

Step 1
preparation of ammonium lanthanide chlorides

The reaction of an intimate mixture of lanthanide oxides with excess ammonium chloride produces anhydrous ammonium salts of the penta- and hexachlorides. Typical reaction conditions are hours at 230-250 °C.[4] Some lanthanides (as well as scandium and yttrium) form pentachlorides:

M2O3 + 10 NH4Cl → 2 (NH4)2MCl5 + 3 H2O + 6 NH3

(M = Dy, Ho, Er, Tm, Lu, Yb, Y, Sc)

Tb4O7 + 22 NH4Cl → 4 (NH4)2TbCl5 + 7 H2O + 14 NH3

Other lanthanides for hexachlorides:

M2O3 + 12 NH4Cl → 2 (NH4)3MCl6 + 3 H2O + 6 NH3

(M = La, Ce, Nd, Pm, Sm, Eu, Gd)

Pr6O11 + 40 NH4Cl → 6 (NH4)3PrCl6 + 11 H2O + 22 NH3

These reactions can also start with the metals, e.g.:[4]

Y + 5 NH4Cl → (NH4)2YCl5 + 1.5 H2 + 3 NH3
Step 2
thermolysis of ammonium lanthanide chlorides

The ammonium lanthanum chlorides are converted to the trichlorides by heating in a vacuum. Typical reaction temperatures are 350–400 °C:[4]

(NH4)2MCl5 → MCl3 + 2 HCl + 2 NH3
(NH4)3MCl6 → MCl3 + 3 HCl + 3 NH3

Other methods

[edit]

Hydrated lanthanide trichlorides dehydrate under a hot stream of hydrogen chloride.[3]

Structures

[edit]
Structure of GdCl3.6H2O, which consists of [GdCl2(H2O)6]+ centers. The coordination spheres are interconnected by hydrogen bonds between the protons and both the coordinated and the ionic chlorides.[6]

As indicated in the table, the anhydrous trichlorides follow two main motifs, UCl3 and YCl3. The UCl3 structure features 9-coordinate metal centers. The PuBr3 structure, adopted uniquely by TbCl3, features 8-coordinated metals. The remaining later metals are 6-coordinate as is aluminium trichloride.[7]

Reactions

[edit]

Lanthanide trichlorides are commercial precursors to the metals by reduction, e.g. with aluminium:[2]

LnCl3 + Al → Ln + AlCl3

In some cases, the trifluoride is preferred.

They react with humid air to give oxychlorides:

LnCl3 + H2O → LnOCl + 2 HCl

For synthetic chemists, this reaction is a problematic since the oxychlorides are less reactive.

References

[edit]
  1. ^ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.
  2. ^ a b I. McGill (2005). "Rare Earth Elements". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a22_607. ISBN 978-3527306732.
  3. ^ a b Brauer, G., ed. (1963). Handbook of Preparative Inorganic Chemistry (2nd ed.). New York: Academic Press.
  4. ^ a b c d Meyer, G. (1989). "The Ammonium Chloride Route to Anhydrous Rare Earth Chlorides—The Example of Ycl 3". The Ammonium Chloride Route to Anhydrous Rare Earth Chlorides-The Example of YCl3. Inorganic Syntheses. Vol. 25. pp. 146–150. doi:10.1002/9780470132562.ch35. ISBN 978-0-470-13256-2.
  5. ^ Edelmann, F. T.; Poremba, P. (1997). Herrmann, W. A. (ed.). Synthetic Methods of Organometallic and Inorganic Chemistry. Vol. VI. Stuttgart: Georg Thieme Verlag. ISBN 978-3-13-103021-4.
  6. ^ Habenschuss, A.; Spedding, F. H. (1980). "Dichlorohexaaquagadolinium(III) Chloride (GdCl2(H2O)6)C". Crystal Structure Communications. 9: 213-218.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  7. ^ Cotton, Simon A. (2011). "Scandium, Yttrium & the Lanthanides: Inorganic & Coordination Chemistry". Encyclopedia of Inorganic and Bioinorganic Chemistry. doi:10.1002/9781119951438.eibc0195. ISBN 9781119951438.