Jump to content

Approximation

From Wikipedia, the free encyclopedia
(Redirected from Approximately equal to)

An approximation is anything that is intentionally similar but not exactly equal to something else.

Etymology and usage

[edit]

The word approximation is derived from Latin approximatus, from proximus meaning very near and the prefix ad- (ad- before p becomes ap- by assimilation) meaning to.[1] Words like approximate, approximately and approximation are used especially in technical or scientific contexts. In everyday English, words such as roughly or around are used with a similar meaning.[2] It is often found abbreviated as approx.

The term can be applied to various properties (e.g., value, quantity, image, description) that are nearly, but not exactly correct; similar, but not exactly the same (e.g., the approximate time was 10 o'clock).

Although approximation is most often applied to numbers, it is also frequently applied to such things as mathematical functions, shapes, and physical laws.

In science, approximation can refer to using a simpler process or model when the correct model is difficult to use. An approximate model is used to make calculations easier. Approximations might also be used if incomplete information prevents use of exact representations.

The type of approximation used depends on the available information, the degree of accuracy required, the sensitivity of the problem to this data, and the savings (usually in time and effort) that can be achieved by approximation.

Mathematics

[edit]

Approximation theory is a branch of mathematics, and a quantitative part of functional analysis. Diophantine approximation deals with approximations of real numbers by rational numbers.

Approximation usually occurs when an exact form or an exact numerical number is unknown or difficult to obtain. However some known form may exist and may be able to represent the real form so that no significant deviation can be found. For example, 1.5 × 106 means that the true value of something being measured is 1,500,000 to the nearest hundred thousand (so the actual value is somewhere between 1,450,000 and 1,550,000); this is in contrast to the notation 1.500 × 106, which means that the true value is 1,500,000 to the nearest thousand (implying that the true value is somewhere between 1,499,500 and 1,500,500).

Numerical approximations sometimes result from using a small number of significant digits. Calculations are likely to involve rounding errors and other approximation errors. Log tables, slide rules and calculators produce approximate answers to all but the simplest calculations. The results of computer calculations are normally an approximation expressed in a limited number of significant digits, although they can be programmed to produce more precise results.[3] Approximation can occur when a decimal number cannot be expressed in a finite number of binary digits.

Related to approximation of functions is the asymptotic value of a function, i.e. the value as one or more of a function's parameters becomes arbitrarily large. For example, the sum is asymptotically equal to k. No consistent notation is used throughout mathematics and some texts use ≈ to mean approximately equal and ~ to mean asymptotically equal whereas other texts use the symbols the other way around.

Typography

[edit]
 ≅ ≈  
Approximately equal to
Almost equal to
In UnicodeU+2245 APPROXIMATELY EQUAL TO (≅, ≅)
U+2248 ALMOST EQUAL TO (≈, ≈, ≈, ≈, ≈, ≈)
Different from
Different fromU+2242 MINUS TILDE
Related
See alsoU+2249 NOT ALMOST EQUAL TO
U+003D = EQUALS SIGN
U+2243 ASYMPTOTICALLY EQUAL TO

The approximately equals sign, , was introduced by British mathematician Alfred Greenhill.[citation needed]

LaTeX symbols

[edit]

Symbols used in LaTeX markup.

  • (\approx), usually to indicate approximation between numbers, like .
  • (\not\approx), usually to indicate that numbers are not approximately equal ().
  • (\simeq), usually to indicate asymptotic equivalence between functions, like .
    • So writing would be wrong under this definition, despite wide use.
  • (\sim), usually to indicate proportionality between functions, the same of the line above will be .
  • (\cong), usually to indicate congruence between figures, like .
  • (\eqsim), usually to indicate that two quantities are equal up to constants.
  • (\lessapprox) and (\gtrapprox), usually to indicate that either the inequality holds or the two values are approximately equal.

Unicode

[edit]

Symbols used to denote items that are approximately equal are wavy or dotted equals signs.[4]

U+223C TILDE OPERATOR Which is also sometimes used to indicate proportionality.
U+223D REVERSED TILDE Which is also sometimes used to indicate proportionality.
U+2243 ASYMPTOTICALLY EQUAL TO A combination of "≈" and "=", which is used to indicate asymptotic equality.
U+2245 APPROXIMATELY EQUAL TO Another combination of "≈" and "=", which is used to indicate isomorphism or congruence.
U+2246 APPROXIMATELY BUT NOT ACTUALLY EQUAL TO
U+2247 NEITHER APPROXIMATELY NOR ACTUALLY EQUAL TO
U+2248 ALMOST EQUAL TO
U+2249 NOT ALMOST EQUAL TO
U+224A ALMOST EQUAL OR EQUAL TO Another combination of "≈" and "=", used to indicate equivalence or approximate equivalence.
U+2250 APPROACHES THE LIMIT Which can be used to represent the approach of a variable, y, to a limit; like the common syntax, .[5]
U+2252 APPROXIMATELY EQUAL TO OR THE IMAGE OF Which is used like "" or "" in Japan, Taiwan, and Korea.
U+2253 IMAGE OF OR APPROXIMATELY EQUAL TO A reversed variation of U+2252 APPROXIMATELY EQUAL TO OR THE IMAGE OF.
U+225F QUESTIONED EQUAL TO
U+2A85 LESS-THAN OR APPROXIMATE
U+2A86 GREATER-THAN OR APPROXIMATE

Science

[edit]

Approximation arises naturally in scientific experiments. The predictions of a scientific theory can differ from actual measurements. This can be because there are factors in the real situation that are not included in the theory. For example, simple calculations may not include the effect of air resistance. Under these circumstances, the theory is an approximation to reality. Differences may also arise because of limitations in the measuring technique. In this case, the measurement is an approximation to the actual value.

The history of science shows that earlier theories and laws can be approximations to some deeper set of laws. Under the correspondence principle, a new scientific theory should reproduce the results of older, well-established, theories in those domains where the old theories work.[6] The old theory becomes an approximation to the new theory.

Some problems in physics are too complex to solve by direct analysis, or progress could be limited by available analytical tools. Thus, even when the exact representation is known, an approximation may yield a sufficiently accurate solution while reducing the complexity of the problem significantly. Physicists often approximate the shape of the Earth as a sphere even though more accurate representations are possible, because many physical characteristics (e.g., gravity) are much easier to calculate for a sphere than for other shapes.

Approximation is also used to analyze the motion of several planets orbiting a star. This is extremely difficult due to the complex interactions of the planets' gravitational effects on each other.[7] An approximate solution is effected by performing iterations. In the first iteration, the planets' gravitational interactions are ignored, and the star is assumed to be fixed. If a more precise solution is desired, another iteration is then performed, using the positions and motions of the planets as identified in the first iteration, but adding a first-order gravity interaction from each planet on the others. This process may be repeated until a satisfactorily precise solution is obtained.

The use of perturbations to correct for the errors can yield more accurate solutions. Simulations of the motions of the planets and the star also yields more accurate solutions.

The most common versions of philosophy of science accept that empirical measurements are always approximations — they do not perfectly represent what is being measured.

Law

[edit]

Within the European Union (EU), "approximation" refers to a process through which EU legislation is implemented and incorporated within Member States' national laws, despite variations in the existing legal framework in each country. Approximation is required as part of the pre-accession process for new member states,[8] and as a continuing process when required by an EU Directive. Approximation is a key word generally employed within the title of a directive, for example the Trade Marks Directive of 16 December 2015 serves "to approximate the laws of the Member States relating to trade marks".[9] The European Commission describes approximation of law as "a unique obligation of membership in the European Union".[8]

See also

[edit]

References

[edit]
  1. ^ The Concise Oxford Dictionary, Eighth edition 1990, ISBN 0-19-861243-5
  2. ^ Longman Dictionary of Contemporary English, Pearson Education Ltd 2009, ISBN 978 1 4082 1532 6
  3. ^ "Numerical Computation Guide". Archived from the original on 2016-04-06. Retrieved 2013-06-16.
  4. ^ "Mathematical Operators – Unicode" (PDF). Retrieved 2013-04-20.
  5. ^ D & D Standard Oil & Gas Abbreviator. PennWell. 2006. p. 366. ISBN 9781593701086. Retrieved May 21, 2020. ≐ approaches a limit
  6. ^ Correspondence principleEncyclopædia Britannica
  7. ^ The three body problem
  8. ^ a b European Commission, Guide to the Approximation of European Union Environmental Legislation, last updated 2 August 2019, accessed 15 November 2022
  9. ^ EUR-Lex, Directive (EU) 2015/2436 of the European Parliament and of the Council of 16 December 2015 to approximate the laws of the Member States relating to trade marks (recast) (Text with EEA relevance), published 23 December 2015, accessed 15 November 2022
[edit]