Jump to content

Bicinchoninic acid assay

From Wikipedia, the free encyclopedia
(Redirected from Bca assay)
BCA protein assay in a 96 well plate

The bicinchoninic acid assay (BCA assay), also known as the Smith assay, after its inventor, Paul K. Smith at the Pierce Chemical Company,[1] now part of Thermo Fisher Scientific, is a biochemical assay for determining the total concentration of protein in a solution (0.5 μg/mL to 1.5 mg/mL), similar to Lowry protein assay, Bradford protein assay or biuret reagent. The total protein concentration is exhibited by a color change of the sample solution from blue to purple in proportion to protein concentration, which can then be measured using colorimetric techniques. The BCA assay was patented by Pierce Chemical Company in 1989 & the patent expired in 2006.[2]

Mechanism

[edit]

A stock BCA solution contains the following ingredients in a highly alkaline solution with a pH 11.25: bicinchoninic acid, sodium carbonate, sodium bicarbonate, sodium tartrate, and copper(II) sulfate pentahydrate.

The BCA assay primarily relies on two reactions. First, the peptide bonds in protein reduce Cu2+ ions from the copper(II) sulfate to Cu1+ (a temperature dependent reaction). The amount of Cu2+ reduced is proportional to the amount of protein present in the solution. Next, two molecules of bicinchoninic acid chelate with each Cu1+ ion, forming a purple-colored complex that strongly absorbs light at a wavelength of 562 nm.

The bicinchoninic acid Cu1+ complex is influenced in protein samples by the presence of cysteine/cystine, tyrosine, and tryptophan side chains. At higher temperatures (37 to 60 °C), peptide bonds assist in the formation of the reaction complex. Incubating the BCA assay at higher temperatures is recommended as a way to increase assay sensitivity while minimizing the variances caused by unequal amino acid composition.[3]

The amount of protein present in a solution can be quantified by measuring the absorption spectra and comparing with protein solutions of known concentration.

Limitations

[edit]

The BCA assay is largely incompatible with reducing agents and metal chelators, although trace quantities may be tolerated.[4] The BCA assay also reportedly responds to common membrane lipids and phospholipids.[5]

Assay variants

[edit]

There are a few alternative variants of the BCA assay:

Original BCA assay

[edit]

As described by Smith,[1] the original BCA assay is a two-component protocol. The two reagents are "stable indefinitely at room temperature".[1] Modern (likely exact or highly similar) formulations are available from at least two commercial vendors.[6][7] The BCA Working solution is generated by mixing Reagent A and Reagent B in a 50:1 ratio, and can be prepared either weekly (it is moderately stable), or as needed.

Reagent A[1]

A suggested but untested alternative formulation in the Smith manuscript is to leave out the NaOH (and presumably not perform the manual pH adjustment to 11.25), but instead to dissolve the other components in a preprepared buffer of 0.25 M Na2CO3 and 0.01 M NaHCO3.[1]

Notably, Smith synthesized their own BCA via the Pfitzinger reaction of isatin and acetoin, substituting NaOH for KOH but otherwise following the synthetic method of Lesene and Henze,[8] as the BCA available from commercial vendors of that time was too impure for their use. At least three successive recrystallizations of their synthesized BCA from 70˚C water was needed to sufficiently purify it for the assay.[1]

Reagent B[1]

Micro BCA assay (for dilute solutions)

[edit]

The BCA Micro BCA assay is a 3-component protocol which uses concentrated stocks of the Biuret reaction, BCA, and copper(II) reagents. It allows for an improved sensitivity of ~2 - 40 μg/mL vs 20 - 2000 μg/mL of the original BCA assay. However, it has a different, and generally speaking more sensitive, interference from non-protein components.[4] Kits for the Micro BCA assay are available from at least two commercial vendors.[9][10] Notably, the composition and use of a "Micro BCA Reagent and Protocol" was described in the original manuscript by Smith,[1] and modern kits likely consist of an exact or highly similar formulation. The protocol consists of mixing Micro-Reagent B and the Copper Solution 25:1 to form Micro-Reagent C (MC), which is not shelf stable and should be freshly prepared, and then mixing MC 1:1 with Micro-Reagent A to produce the final (also unstable) assay working solution. Micro-Reagent A, Micro-Reagent B, and Copper Solution are stable indefinitely at room temperature.[1]

Micro-Reagent A (MA)[1]

  • 8% w/v Na2CO3·H2O (CAS: 5968-11-6)
  • 1.6% w/v NaOH (CAS: 1310-73-2)
  • 1.6% w/v Na2 tartrate (CAS: 868-18-8) (10x concentration as Reagent A in Original BCA Assay above)
  • Sufficient NaHCO3 (CAS: 144-55-8) to adjust pH to 11.25

Micro-Reagent B (MB)[1]

  • 4% w/v BCA-Na2 (CAS: 979-88-4) (4x concentration as Reagent A in Original BCA Assay above)

Copper Solution[1]

  • 4% w/v CuSO4·5H2O (CAS: 7758-99-8) (Same concentration as Reagent B in Original BCA Assay above)

Reducing agent compatible (RAC) BSA assay

[edit]

This type of BCA assay includes a proprietary thiol covalent blocking "Compatibility Reagent"[11] aka a Reducing Agent Compatibility Agent (RACA).[12] Although this allows greater compatibility with reducing agents, the assay has a different interference profile from other non-protein components.[4]

Rapid Gold BCA

[edit]

This type of BCA assay seems to only be available from Thermo Fisher Scientific. Reportedly it uses "the same copper reduction method as the traditional BCA Protein Assay with a unique [proprietary] copper chelator.", that absorbs at 480 nm instead of 562 nm.[13] This proprietor chelator and presumed optimized Biuret reaction formulation allows the assay to provide rapid (<5 min) results without the 37˚C+ incubation of the original BCA assay. However the assay has a different interference profile from other non-protein components.[4] The Pierce Quantitative Colorimetric Peptide Assay (now owned by and available from Thermo Fisher Scientific) appears to use a similar or identical 480 nm absorbing proprietary copper chelator.[14]

See also

[edit]

References

[edit]
  1. ^ a b c d e f g h i j k l Smith, P.K.; et al. (1985). "Measurement of protein using bicinchoninic acid". Anal. Biochem. 150 (1): 76–85. doi:10.1016/0003-2697(85)90442-7. PMID 3843705.
  2. ^ "US4839295A - Measurement of protein using bicinchoninic acid". Google Patents. 1987-05-26. Retrieved 2023-04-09.
  3. ^ Olsen BJ, Markwell J (2007). "Assays for the Determination of Protein Concentration" (PDF). Current Protocols in Protein Science: 14–17.
  4. ^ a b c d Fisher Scientific, Thermo. "Protein quantitation assay compatibility table" (PDF). Retrieved 19 April 2023.
  5. ^ Kessler, Ralph J.; Fanestil, Darrell D. (1986). "Interference by lipids in the determination of protein using bicinchoninic acid". Analytical Biochemistry. 159 (1). Elsevier BV: 138–142. doi:10.1016/0003-2697(86)90318-0. ISSN 0003-2697. PMID 3812993.
  6. ^ Fisher Scientific, Thermo. "Pierce BCA Protein Assay Kit - User Manual" (PDF). Retrieved 22 April 2023.
  7. ^ Biosciences, G-. "Bicinchoninic Acid (BCA) Protein Assay - User Manual" (PDF). Retrieved 22 April 2023.
  8. ^ Lesesne, Sherman D.; Henze, Henry R. (1942). "Utilization of Alkoxy Ketones in the Synthesis of Quinolines by the Pfitzinger Reaction. II1". Journal of the American Chemical Society. 64 (8). American Chemical Society (ACS): 1897–1900. doi:10.1021/ja01260a041. ISSN 0002-7863.
  9. ^ Fisher Scientific, Thermo. "Micro BCA Protein Assay Kit - Instructions" (PDF). Retrieved 22 April 2023.
  10. ^ Biosciences, G-. "Micro Bicinchoninic Acid (BCA) Protein Assay - User Manual" (PDF).
  11. ^ Fisher Scientific, Thermo. "Pierce Microplate BCA-RAC Protein Assay Kit - User Manual" (PDF). Retrieved 22 April 2023.
  12. ^ Biosciences, G-. "Bicinchoninic Acid (BCA) Reducing Agent Compatible Protein Assay - User Manual" (PDF). Retrieved 22 April 2023.
  13. ^ Fisher Scientific, Thermo. "Pierce Rapid Gold BCA Protein Assay Kit - User Guide" (PDF). Retrieved 22 April 2023.
  14. ^ Fisher Scientific, Thermo. "Pierce Quantitative Colorimetric Peptide Assay - User Manual" (PDF). Thermo Fisher Scientific. Retrieved 19 July 2023.
[edit]