Glossary of engineering: M–Z
Appearance
(Redirected from Draft:Glossary of engineering: M)
This glossary of engineering terms is a list of definitions about the major concepts of engineering. Please see the bottom of the page for glossaries of specific fields of engineering.
Engineering |
---|
M
[edit]- Macaulay's method
- (The double integration method) is a technique used in structural analysis to determine the deflection of Euler-Bernoulli beams. Use of Macaulay's technique is very convenient for cases of discontinuous and/or discrete loading. Typically partial uniformly distributed loads (u.d.l.) and uniformly varying loads (u.v.l.) over the span and a number of concentrated loads are conveniently handled using this technique.
- Mach number
- The ratio of the speed of an object to the speed of sound.
- Machine
- A machine (or mechanical device) is a mechanical structure that uses power to apply forces and control movement to perform an intended action. Machines can be driven by animals and people, by natural forces such as wind and water, and by chemical, thermal, or electrical power, and include a system of mechanisms that shape the actuator input to achieve a specific application of output forces and movement. They can also include computers and sensors that monitor performance and plan movement, often called mechanical systems.
- Machine code
- In computer programming, machine code, consisting of machine language instructions, is a low-level programming language used to directly control a computer's central processing unit (CPU). Each instruction causes the CPU to perform a very specific task, such as a load, a store, a jump, or an arithmetic logic unit (ALU) operation on one or more units of data in the CPU's registers or memory.
- Machine element
- or hardware, refers to an elementary component of a machine. These elements consist of three basic types:
- structural components such as frame members, bearings, axles, splines, fasteners, seals, and lubricants,
- mechanisms that control movement in various ways such as gear trains, belt or chain drives, linkages, cam and follower systems, including brakes and clutches, and
- control components such as buttons, switches, indicators, sensors, actuators and computer controllers.[1]
- Machine learning
- (ML), is the study of computer algorithms that improve automatically through experience and by the use of data.[4] It is seen as a part of artificial intelligence. Machine learning algorithms build a model based on sample data, known as "training data", in order to make predictions or decisions without being explicitly programmed to do so.[5] Machine learning algorithms are used in a wide variety of applications, such as in medicine, email filtering, speech recognition, and computer vision, where it is difficult or unfeasible to develop conventional algorithms to perform the needed tasks.[6]
- Maclaurin series
- In mathematics, the Taylor series of a function is an infinite sum of terms that are expressed in terms of the function's derivatives at a single point. For most common functions, the function and the sum of its Taylor series are equal near this point. Taylor's series are named after Brook Taylor, who introduced them in 1715. If zero is the point where the derivatives are considered, a Taylor series is also called a Maclaurin series, after Colin Maclaurin, who made extensive use of this special case of Taylor series in the 18th century.
- Magnetic field
- A magnetic field is a vector field that describes the magnetic influence on moving electric charges, electric currents,[7]: ch1 [8] and magnetic materials. A moving charge in a magnetic field experiences a force perpendicular to its own velocity and to the magnetic field.: ch13 [9] A permanent magnet's magnetic field pulls on ferromagnetic materials such as iron, and attracts or repels other magnets. In addition, a magnetic field that varies with location will exert a force on a range of non-magnetic materials by affecting the motion of their outer atomic electrons. Magnetic fields surround magnetized materials, and are created by electric currents such as those used in electromagnets, and by electric fields varying in time. Since both strength and direction of a magnetic field may vary with location, they are described as a map assigning a vector to each point of space or, more precisely—because of the way the magnetic field transforms under mirror reflection—as a field of pseudovectors. In electromagnetics, the term "magnetic field" is used for two distinct but closely related vector fields denoted by the symbols B and H. In the International System of Units, H, magnetic field strength, is measured in the SI base units of ampere per meter (A/m).[10] B, magnetic flux density, is measured in tesla (in SI base units: kilogram per second2 per ampere),[11] which is equivalent to newton per meter per ampere. H and B differ in how they account for magnetization. In vacuum, the two fields are related through the vacuum permeability, ; but in a magnetized material, the terms differ by the material's magnetization at each point.
- Magnetism
- is a class of physical attributes that are mediated by magnetic fields. Electric currents and the magnetic moments of elementary particles give rise to a magnetic field, which acts on other currents and magnetic moments. Magnetism is one aspect of the combined phenomenon of electromagnetism. The most familiar effects occur in ferromagnetic materials, which are strongly attracted by magnetic fields and can be magnetized to become permanent magnets, producing magnetic fields themselves. Demagnetizing a magnet is also possible. Only a few substances are ferromagnetic; the most common ones are iron, cobalt and nickel and their alloys. The rare-earth metals neodymium and samarium are less common examples. The prefix ferro- refers to iron, because permanent magnetism was first observed in lodestone, a form of natural iron ore called magnetite, Fe3O4.
- Manufacturing engineering
- is a branch of professional engineering that shares many common concepts and ideas with other fields of engineering such as mechanical, chemical, electrical, and industrial engineering. Manufacturing engineering requires the ability to plan the practices of manufacturing; to research and to develop tools, processes, machines and equipment; and to integrate the facilities and systems for producing quality products with the optimum expenditure of capital.[12] The manufacturing or production engineer's primary focus is to turn raw material into an updated or new product in the most effective, efficient & economic way possible.
- Mass balance
- A mass balance, also called a material balance, is an application of conservation of mass to the analysis of physical systems. By accounting for material entering and leaving a system, mass flows can be identified which might have been unknown, or difficult to measure without this technique. The exact conservation law used in the analysis of the system depends on the context of the problem, but all revolve around mass conservation, i.e., that matter cannot disappear or be created spontaneously.[13]: 59–62
- Mass density
- The density (more precisely, the volumetric mass density; also known as specific mass), of a substance is its mass per unit volume. The symbol most often used for density is ρ (the lower case Greek letter rho), although the Latin letter D can also be used. Mathematically, density is defined as mass divided by volume:[14]
- Mass moment of inertia
- The moment of inertia, otherwise known as the mass moment of inertia, angular mass, second moment of mass, or most accurately, rotational inertia, of a rigid body is a quantity that determines the torque needed for a desired angular acceleration about a rotational axis, akin to how mass determines the force needed for a desired acceleration. It depends on the body's mass distribution and the axis chosen, with larger moments requiring more torque to change the body's rate of rotation.
- Mass number
- The mass number (symbol A, from the German word Atomgewicht [atomic weight]),[16] also called atomic mass number or nucleon number, is the total number of protons and neutrons (together known as nucleons) in an atomic nucleus. It is approximately equal to the atomic (also known as isotopic) mass of the atom expressed in atomic mass units. Since protons and neutrons are both baryons, the mass number A is identical with the baryon number B of the nucleus (and also of the whole atom or ion). The mass number is different for each different isotope of a chemical element. Hence, the difference between the mass number and the atomic number Z gives the number of neutrons (N) in a given nucleus: N = A − Z.[17]
The mass number is written either after the element name or as a superscript to the left of an element's symbol. For example, the most common isotope of carbon is carbon-12, or 12
C
, which has 6 protons and 6 neutrons. The full isotope symbol would also have the atomic number (Z) as a subscript to the left of the element symbol directly below the mass number: 12
6C
.[18] - Mass spectrometry
- (MS), is an analytical technique that is used to measure the mass-to-charge ratio of ions. The results are typically presented as a mass spectrum, a plot of intensity as a function of the mass-to-charge ratio. Mass spectrometry is used in many different fields and is applied to pure samples as well as complex mixtures.
- Material failure theory
- is an interdisciplinary field of materials science and solid mechanics which attempts to predict the conditions under which solid materials fail under the action of external loads. The failure of a material is usually classified into brittle failure (fracture) or ductile failure (yield). Depending on the conditions (such as temperature, state of stress, loading rate) most materials can fail in a brittle or ductile manner or both. However, for most practical situations, a material may be classified as either brittle or ductile. In mathematical terms, failure theory is expressed in the form of various failure criteria which are valid for specific materials. Failure criteria are functions in stress or strain space which separate "failed" states from "unfailed" states. A precise physical definition of a "failed" state is not easily quantified and several working definitions are in use in the engineering community. Quite often, phenomenological failure criteria of the same form are used to predict brittle failure and ductile yields.
- Material properties
- A material's property is an intensive property of some material, i.e., a physical property that does not depend on the amount of the material. These quantitative properties may be used as a metric by which the benefits of one material versus another can be compared, thereby aiding in materials selection.
- Materials science
- The interdisciplinary field of materials science, also commonly termed materials science and engineering, covers the design and discovery of new materials, particularly solids. The intellectual origins of materials science stem from the Enlightenment, when researchers began to use analytical thinking from chemistry, physics, and engineering to understand ancient, phenomenological observations in metallurgy and mineralogy.[19][20] Materials science still incorporates elements of physics, chemistry, and engineering. As such, the field was long considered by academic institutions as a sub-field of these related fields. Beginning in the 1940s, materials science began to be more widely recognized as a specific and distinct field of science and engineering, and major technical universities around the world created dedicated schools for its study. Materials scientists emphasize understanding, how the history of a material (processing) influences its structure, and thus the material's properties and performance. The understanding of processing-structure-properties relationships is called the materials paradigm. This paradigm is used to advance understanding in a variety of research areas, including nanotechnology, biomaterials, and metallurgy. Materials science is also an important part of forensic engineering and failure analysis – investigating materials, products, structures or components, which fail or do not function as intended, causing personal injury or damage to property. Such investigations are key to understanding, for example, the causes of various aviation accidents and incidents.
- Mathematical optimization
- Mathematical optimization (alternatively spelled optimisation) or mathematical programming is the selection of a best element, with regard to some criterion, from some set of available alternatives.[21] Optimization problems of sorts arise in all quantitative disciplines from computer science and engineering to operations research and economics, and the development of solution methods has been of interest in mathematics for centuries.[22] In the simplest case, an optimization problem consists of maximizing or minimizing a real function by systematically choosing input values from within an allowed set and computing the value of the function. The generalization of optimization theory and techniques to other formulations constitutes a large area of applied mathematics. More generally, optimization includes finding "best available" values of some objective function given a defined domain (or input), including a variety of different types of objective functions and different types of domains.
- Mathematical physics
- refers to the development of mathematical methods for application to problems in physics. The Journal of Mathematical Physics defines the field as "the application of mathematics to problems in physics and the development of mathematical methods suitable for such applications and for the formulation of physical theories".[23]
- Mathematics
- includes the study of such topics as quantity (number theory),[24] structure (algebra),[25] space (geometry),[24] and change (analysis).[26][27][28] It has no generally accepted definition.[29][30] Mathematicians seek and use patterns[31][32] to formulate new conjectures; they resolve the truth or falsity of such by mathematical proof. When mathematical structures are good models of real phenomena, mathematical reasoning can be used to provide insight or predictions about nature. Through the use of abstraction and logic, mathematics developed from counting, calculation, measurement, and the systematic study of the shapes and motions of physical objects. Practical mathematics has been a human activity from as far back as written records exist. The research required to solve mathematical problems can take years or even centuries of sustained inquiry.
- Matrix
- In mathematics, a matrix (plural matrices) is a rectangular array or table of numbers, symbols, or expressions, arranged in rows and columns, which is used to represent a mathematical object or a property of such an object. For example,
- Matter
- In classical physics and general chemistry, matter is any substance that has mass and takes up space by having volume.[34] All everyday objects that can be touched are ultimately composed of atoms, which are made up of interacting subatomic particles, and in everyday as well as scientific usage, "matter" generally includes atoms and anything made up of them, and any particles (or combination of particles) that act as if they have both rest mass and volume. However it does not include massless particles such as photons, or other energy phenomena or waves such as light.[34]: 21 [35] Matter exists in various states (also known as phases). These include classical everyday phases such as solid, liquid, and gas – for example water exists as ice, liquid water, and gaseous steam – but other states are possible, including plasma, Bose–Einstein condensates, fermionic condensates, and quark–gluon plasma.[36]
- Maximum-distortion energy theory
- .
- Maximum-normal-stress theory
- .
- Maximum shear stress
- .
- Maxwell's equations
- are a set of coupled partial differential equations that, together with the Lorentz force law, form the foundation of classical electromagnetism, classical optics, and electric circuits. The equations provide a mathematical model for electric, optical, and radio technologies, such as power generation, electric motors, wireless communication, lenses, radar etc. They describe how electric and magnetic fields are generated by charges, currents, and changes of the fields.[note 1] The equations are named after the physicist and mathematician James Clerk Maxwell, who, in 1861 and 1862, published an early form of the equations that included the Lorentz force law. Maxwell first used the equations to propose that light is an electromagnetic phenomenon. An important consequence of Maxwell's equations is that they demonstrate how fluctuating electric and magnetic fields propagate at a constant speed (c) in vacuum. Known as electromagnetic radiation, these waves may occur at various wavelengths to produce a spectrum of light from radio waves to gamma rays.
- Mean
- There are several kinds of mean in mathematics, especially in statistics: For a data set, the arithmetic mean, also known as average or arithmetic average, is a central value of a finite set of numbers: specifically, the sum of the values divided by the number of values. The arithmetic mean of a set of numbers x1, x2, ..., xn is typically denoted by [note 2]. If the data set were based on a series of observations obtained by sampling from a statistical population, the arithmetic mean is the sample mean (denoted ) to distinguish it from the mean, or expected value, of the underlying distribution, the population mean (denoted or [note 3]).[37] In probability and statistics, the population mean, or expected value, is a measure of the central tendency either of a probability distribution or of a random variable characterized by that distribution.[38] In a discrete probability distribution of a random variable X, the mean is equal to the sum over every possible value weighted by the probability of that value; that is, it is computed by taking the product of each possible value x of X and its probability p(x), and then adding all these products together, giving .[39][40] An analogous formula applies to the case of a continuous probability distribution. Not every probability distribution has a defined mean (see the Cauchy distribution for an example). Moreover, the mean can be infinite for some distributions. For a finite population, the population mean of a property is equal to the arithmetic mean of the given property, while considering every member of the population. For example, the population mean height is equal to the sum of the heights of every individual—divided by the total number of individuals. The sample mean may differ from the population mean, especially for small samples. The law of large numbers states that the larger the size of the sample, the more likely it is that the sample mean will be close to the population mean.[41] Outside probability and statistics, a wide range of other notions of mean are often used in geometry and mathematical analysis.
- Measure of central tendency
- In statistics, a central tendency (or measure of central tendency) is a central or typical value for a probability distribution.[42] It may also be called a center or location of the distribution. Colloquially, measures of central tendency are often called averages. The term central tendency dates from the late 1920s.[43] The most common measures of central tendency are the arithmetic mean, the median, and the mode. A middle tendency can be calculated for either a finite set of values or for a theoretical distribution, such as the normal distribution. Occasionally authors use central tendency to denote "the tendency of quantitative data to cluster around some central value."[43][44] The central tendency of a distribution is typically contrasted with its dispersion or variability; dispersion and central tendency are the often characterized properties of distributions. Analysis may judge whether data has a strong or a weak central tendency based on its dispersion.
- Mechanical advantage
- is a measure of the force amplification achieved by using a tool, mechanical device or machine system. The device trades off input forces against movement to obtain a desired amplification in the output force. The model for this is the law of the lever. Machine components designed to manage forces and movement in this way are called mechanisms.[45] An ideal mechanism transmits power without adding to or subtracting from it. This means the ideal mechanism does not include a power source, is frictionless, and is constructed from rigid bodies that do not deflect or wear. The performance of a real system relative to this ideal is expressed in terms of efficiency factors that take into account departures from the ideal.
- Mechanical engineering
- is an engineering branch that combines engineering physics and mathematics principles with materials science to design, analyze, manufacture, and maintain mechanical systems.[46] It is one of the oldest and broadest of the engineering branches.
- Mechanical filter
- is a signal processing filter usually used in place of an electronic filter at radio frequencies. Its purpose is the same as that of a normal electronic filter: to pass a range of signal frequencies, but to block others. The filter acts on mechanical vibrations which are the analogue of the electrical signal. At the input and output of the filter, transducers convert the electrical signal into, and then back from, these mechanical vibrations.
- Mechanical wave
- is a wave that is an oscillation of matter, and therefore transfers energy through a medium.[47] While waves can move over long distances, the movement of the medium of transmission—the material—is limited. Therefore, the oscillating material does not move far from its initial equilibrium position. Mechanical waves transport energy. This energy propagates in the same direction as the wave. Any kind of wave (mechanical or electromagnetic) has a certain energy. Mechanical waves can be produced only in media which possess elasticity and inertia.
- Mechanics
- is the area of physics concerned with the motions of physical objects, more specifically the relationships among force, matter, and motion.[48] Forces applied to objects result in displacements, or changes of an object's position relative to its environment. This branch of physics has its origins in Ancient Greece with the writings of Aristotle and Archimedes[49][50][51] (see History of classical mechanics and Timeline of classical mechanics). During the early modern period, scientists such as Galileo, Kepler, and Newton laid the foundation for what is now known as classical mechanics. It is a branch of classical physics that deals with particles that are either at rest or are moving with velocities significantly less than the speed of light. It can also be defined as a branch of science which deals with the motion of and forces on bodies not in the quantum realm. The field is today less widely understood in terms of quantum theory.
- Mechanism
- is a device that transforms input forces and movement into a desired set of output forces and movement. Mechanisms generally consist of moving components which may include:
- Gears and gear trains
- Belts and chain drives
- Cams and followers
- Linkages
- Friction devices, such as brakes or clutches
- Structural components such as a frame, fasteners, bearings, springs, or lubricants
- Various machine elements, such as splines, pins, or keys
- Median
- In statistics and probability theory, the median is the value separating the higher half from the lower half of a data sample, a population, or a probability distribution. For a data set, it may be thought of as "the middle" value. The basic feature of the median in describing data compared to the mean (often simply described as the "average") is that it is not skewed by a small proportion of extremely large or small values, and therefore provides a better representation of a "typical" value. Median income, for example, may be a better way to suggest what a "typical" income is, because income distribution can be very skewed. The median is of central importance in robust statistics, as it is the most resistant statistic, having a breakdown point of 50%: so long as no more than half the data are contaminated, the median is not an arbitrarily large or small result.
- Melting
- Melting, or fusion, is a physical process that results in the phase transition of a substance from a solid to a liquid. This occurs when the internal energy of the solid increases, typically by the application of heat or pressure, which increases the substance's temperature to the melting point. At the melting point, the ordering of ions or molecules in the solid breaks down to a less ordered state, and the solid melts to become a liquid.
- Melting point
- The melting point (or, rarely, liquefaction point) of a substance is the temperature at which it changes state from solid to liquid. At the melting point the solid and liquid phase exist in equilibrium. The melting point of a substance depends on pressure and is usually specified at a standard pressure such as 1 atmosphere or 100 kPa. When considered as the temperature of the reverse change from liquid to solid, it is referred to as the freezing point or crystallization point. Because of the ability of substances to supercool, the freezing point can easily appear to be below its actual value. When the "characteristic freezing point" of a substance is determined, in fact the actual methodology is almost always "the principle of observing the disappearance rather than the formation of ice, that is, the melting point."[52]
- Meson
- In particle physics, mesons are hadronic subatomic particles composed of an equal number of quarks and antiquarks, usually one of each, bound together by strong interactions. Because mesons are composed of quark subparticles, they have a meaningful physical size, a diameter of roughly one femtometer (1×10−15 m),[53] which is about 0.6 times the size of a proton or neutron. All mesons are unstable, with the longest-lived lasting for only a few hundredths of a microsecond. Heavier mesons decay to lighter mesons and ultimately to stable electrons, neutrinos and photons.
- Metallic bonding
- is a type of chemical bonding that arises from the electrostatic attractive force between conduction electrons (in the form of an electron cloud of delocalized electrons) and positively charged metal ions. It may be described as the sharing of free electrons among a structure of positively charged ions (cations). Metallic bonding accounts for many physical properties of metals, such as strength, ductility, thermal and electrical resistivity and conductivity, opacity, and luster.[54][55][56][57]
Metallic bonding is not the only type of chemical bonding a metal can exhibit, even as a pure substance. For example, elemental gallium consists of covalently-bound pairs of atoms in both liquid and solid-state—these pairs form a crystal structure with metallic bonding between them. Another example of a metal–metal covalent bond is the mercurous ion (Hg2+
2). - Middle-out
- A combination of top-down and bottom-up design.[58]
- Mid-range
- In statistics, the mid-range or mid-extreme is a measure of central tendency of a sample (statistics) defined as the arithmetic mean of the maximum and minimum values of the data set:[59]
- Midhinge
- In statistics, the midhinge is the average of the first and third quartiles and is thus a measure of location.
Equivalently, it is the 25% trimmed mid-range or 25% midsummary; it is an L-estimator.
- the notation {hkℓ} denotes the set of all planes that are equivalent to (hkℓ) by the symmetry of the lattice.
- [hkℓ], with square instead of round brackets, denotes a direction in the basis of the direct lattice vectors instead of the reciprocal lattice; and
- similarly, the notation <hkℓ> denotes the set of all directions that are equivalent to [hkℓ] by symmetry.
N
[edit]- Nanoengineering
- is the practice of engineering on the nanoscale. It derives its name from the nanometre, a unit of measurement equalling one billionth of a meter. Nanoengineering is largely a synonym for nanotechnology, but emphasizes the engineering rather than the pure science aspects of the field.
- Nanotechnology
- The technology of systems built with moving parts on the order of a nanometre in size.
- In physics, the Navier–Stokes equations are a set of partial differential equations which describe the motion of viscous fluid substances, named after French engineer and physicist Claude-Louis Navier and Anglo-Irish physicist and mathematician George Gabriel Stokes.
- Neutrino
- A neutrino (denoted by the Greek letter ν) is a fermion (an elementary particle with spin of 1/2) that interacts only via the weak subatomic force and gravity.[82][83] The neutrino is so named because it is electrically neutral and because its rest mass is so small (-ino) that it was long thought to be zero. The mass of the neutrino is much smaller than that of the other known elementary particles.[84] The weak force has a very short range, the gravitational interaction is extremely weak, and neutrinos do not participate in the strong interaction.[85] Thus, neutrinos typically pass through normal matter unimpeded and undetected.[86][83]
- Newtonian fluid
- is a fluid in which the viscous stresses arising from its flow, at every point, are linearly[87] correlated to the local strain rate—the rate of change of its deformation over time.[88][89][90] That is equivalent to saying those forces are proportional to the rates of change of the fluid's velocity vector as one moves away from the point in question in various directions. More precisely, a fluid is Newtonian only if the tensors that describe the viscous stress and the strain rate are related by a constant viscosity tensor that does not depend on the stress state and velocity of the flow. If the fluid is also isotropic (that is, its mechanical properties are the same along any direction), the viscosity tensor reduces to two real coefficients, describing the fluid's resistance to continuous shear deformation and continuous compression or expansion, respectively.
- Norton's theorem
- In direct-current circuit theory, Norton's theorem (aka Mayer–Norton theorem) is a simplification that can be applied to networks made of linear time-invariant resistances, voltage sources, and current sources. At a pair of terminals of the network, it can be replaced by a current source and a single resistor in parallel. For alternating current (AC) systems the theorem can be applied to reactive impedances as well as resistances.
- Nozzle
- is a device designed to control the direction or characteristics of a fluid flow (especially to increase velocity) as it exits (or enters) an enclosed chamber or pipe. A nozzle is often a pipe or tube of varying cross sectional area, and it can be used to direct or modify the flow of a fluid (liquid or gas). Nozzles are frequently used to control the rate of flow, speed, direction, mass, shape, and/or the pressure of the stream that emerges from them. In a nozzle, the velocity of fluid increases at the expense of its pressure energy.
- nth root
- To put a number of function to the exponential power of 1/n.
- Nuclear binding energy
- The difference between the total mass energy of a nucleus and the mass energy of the isolated nucleons.
- Nuclear engineering
- The profession that deals with nuclear power.
- Nuclear fusion
- is a reaction in which two or more atomic nuclei are combined to form one or more different atomic nuclei and subatomic particles (neutrons or protons). The difference in mass between the reactants and products is manifested as either the release or the absorption of energy. This difference in mass arises due to the difference in atomic binding energy between the nuclei before and after the reaction. Fusion is the process that powers active or main sequence stars and other high-magnitude stars, where large amounts of energy are released.
- Nuclear physics
- The science that describes the components of atoms.
- Nuclear potential energy
- The energy that is given up in decay of an unstable nucleus.
- Nuclear power
- The use of energy derived from nuclear chain reactions for electricity production or ship propulsion.
O
[edit]- Ohm
- The SI unit of electrical resistance.
- Ohm's law
- A law describing the relationship between resistance, current, and voltage.
- Optics
- The study of light.
- Organic chemistry
- The study of carbon compounds.
- Osmosis
- The spontaneous movement of molecules or ions through a semi-permable membrane, tending to equalize concentration on both sides.
P
[edit]- Parallel circuit
- A circuit that begins and ends at the same node as another circuit.
- Parity (mathematics)
- In mathematics, parity is the property of an integer of whether it is even or odd. An integer's parity is even if it is divisible by two with no remainders left and its parity is odd if its remainder is 1.[91] For example, -4, 0, 82, and 178 are even because there is no remainder when dividing it by 2. By contrast, -3, 5, 7, 21 are odd numbers as they leave a remainder of 1 when divided by 2.
- Parity (physics)
- In quantum mechanics, a parity transformation (also called parity inversion) is the flip in the sign of one spatial coordinate. In three dimensions, it can also refer to the simultaneous flip in the sign of all three spatial coordinates (a point reflection):
- Paramagnetism
- is a form of magnetism whereby some materials are weakly attracted by an externally applied magnetic field, and form internal, induced magnetic fields in the direction of the applied magnetic field. In contrast with this behavior, diamagnetic materials are repelled by magnetic fields and form induced magnetic fields in the direction opposite to that of the applied magnetic field.[92] Paramagnetic materials include most chemical elements and some compounds;[93] they have a relative magnetic permeability slightly greater than 1 (i.e., a small positive magnetic susceptibility) and hence are attracted to magnetic fields. The magnetic moment induced by the applied field is linear in the field strength and rather weak. It typically requires a sensitive analytical balance to detect the effect and modern measurements on paramagnetic materials are often conducted with a SQUID magnetometer.
- Particle accelerator
- is a machine that uses electromagnetic fields to propel charged particles to very high speeds and energies, and to contain them in well-defined beams.[94]
- Particle displacement
- Particle displacement or displacement amplitude is a measurement of distance of the movement of a sound particle from its equilibrium position in a medium as it transmits a sound wave.[95] The SI unit of particle displacement is the meter (m). In most cases this is a longitudinal wave of pressure (such as sound), but it can also be a transverse wave, such as the vibration of a taut string. In the case of a sound wave travelling through air, the particle displacement is evident in the oscillations of air molecules with, and against, the direction in which the sound wave is travelling.[96]
- Particle physics
- Particle physics (also known as high energy physics) is a branch of physics that studies the nature of the particles that constitute matter and radiation. Although the word particle can refer to various types of very small objects (e.g. protons, gas particles, or even household dust), particle physics usually investigates the irreducibly smallest detectable particles and the fundamental interactions necessary to explain their behaviour. In current understanding, these elementary particles are excitations of the quantum fields that also govern their interactions. The currently dominant theory explaining these fundamental particles and fields, along with their dynamics, is called the Standard Model. Thus, modern particle physics generally investigates the Standard Model and its various possible extensions, e.g. to the newest "known" particle, the Higgs boson, or even to the oldest known force field, gravity.[97][98]
- Pascal's law
- Pascal's law (also Pascal's principle[99][100][101] or the principle of transmission of fluid-pressure) is a principle in fluid mechanics that states that a pressure change occurring anywhere in a confined incompressible fluid is transmitted throughout the fluid such that the same change occurs everywhere.[102] The law was established by French mathematician Blaise Pascal[103] in 1647–48.[104]
- Pendulum
- Is a weight suspended from a pivot so that it can swing freely.[105] When a pendulum is displaced sideways from its resting, equilibrium position, it is subject to a restoring force due to gravity that will accelerate it back toward the equilibrium position. When released, the restoring force acting on the pendulum's mass causes it to oscillate about the equilibrium position, swinging back and forth. The time for one complete cycle, a left swing and a right swing, is called the period. The period depends on the length of the pendulum and also to a slight degree on the amplitude, the width of the pendulum's swing.
- Petroleum engineering
- is a field of engineering concerned with the activities related to the production of hydrocarbons, which can be either crude oil or natural gas.[106] Exploration and production are deemed to fall within the upstream sector of the oil and gas industry. Exploration, by earth scientists, and petroleum engineering are the oil and gas industry's two main subsurface disciplines, which focus on maximizing economic recovery of hydrocarbons from subsurface reservoirs. Petroleum geology and geophysics focus on provision of a static description of the hydrocarbon reservoir rock, while petroleum engineering focuses on estimation of the recoverable volume of this resource using a detailed understanding of the physical behavior of oil, water and gas within porous rock at very high pressure.
- pH
- A logarithmic measure of the concentration of hydrogen ions in an acid or base solution.
- Phase (matter)
- In the physical sciences, a phase is a region of space (a thermodynamic system), throughout which all physical properties of a material are essentially uniform.[107][108]: 86 [109]: 3 Examples of physical properties include density, index of refraction, magnetization and chemical composition. A simple description is that a phase is a region of material that is chemically uniform, physically distinct, and (often) mechanically separable. In a system consisting of ice and water in a glass jar, the ice cubes are one phase, the water is a second phase, and the humid air is a third phase over the ice and water. The glass of the jar is another separate phase. (See state of matter § Glass)
- Phase (waves)
- In physics and mathematics, the phase of a periodic function of some real variable (such as time) is an angle-like quantity representing the fraction of the cycle covered up to . It is denoted and expressed in such a scale that it varies by one full turn as the variable goes through each period (and goes through each complete cycle). It may be measured in any angular unit such as degrees or radians, thus increasing by 360° or as the variable completes a full period.[110]
- Phase diagram
- A phase diagram in physical chemistry, engineering, mineralogy, and materials science is a type of chart used to show conditions (pressure, temperature, volume, etc.) at which thermodynamically distinct phases (such as solid, liquid or gaseous states) occur and coexist at equilibrium.
- Phase rule
- In thermodynamics, the phase rule is a general principle governing "pVT" systems (that is, systems whose states are completely described by the variables pressure (p), volume (V) and temperature (T)) in thermodynamic equilibrium. If F is the number of degrees of freedom, C is the number of components and P is the number of phases, then[111][112]
- Photon
- is a type of elementary particle. It is the quantum of the electromagnetic field including electromagnetic radiation such as light and radio waves, and the force carrier for the electromagnetic force. Photons are massless,[a] so they always move at the speed of light in vacuum, 299792458 m/s (or about 186,282 mi/s). The photon belongs to the class of bosons.
- Physical chemistry
- is the study of macroscopic, and particulate phenomena in chemical systems in terms of the principles, practices, and concepts of physics such as motion, energy, force, time, thermodynamics, quantum chemistry, statistical mechanics, analytical dynamics and chemical equilibrium.
- Physical quantity
- A physical quantity is a property of a material or system that can be quantified by measurement. A physical quantity can be expressed as a value, which is the algebraic multiplication of a numerical value and a unit. For example, the physical quantity mass can be quantified as n kg, where n is the numerical value and kg is the unit. A physical quantity possesses at least two characteristics in common. One is numerical magnitude and the other is the unit in which it is measured.
- Physics
- is the natural science that studies matter,[b] its motion and behavior through space and time, and the related entities of energy and force.[115] Physics is one of the most fundamental scientific disciplines, and its main goal is to understand how the universe behaves.[c][116][117][118]
- Planck constant
- The Planck constant, or Planck's constant, is a fundamental physical constant denoted , and is of fundamental importance in quantum mechanics. A photon's energy is equal to its frequency multiplied by the Planck constant. Due to mass–energy equivalence, the Planck constant also relates mass to frequency. In metrology it is used, together with other constants, to define the kilogram, an SI unit.[119] The SI units are defined in such a way that, when the Planck constant is expressed in SI units, it has the exact value = 6.62607015×10−34 J⋅Hz−1.[120][121]
- Plasma (physics)
- Is one of the four fundamental states of matter, first systematically studied by Irving Langmuir in the 1920s.[122][123] It consists of a gas of ions – atoms or molecules which have one or more orbital electrons stripped (or, rarely, an extra electron attached), and free electrons.
- Plasticity
- In physics and materials science, plasticity, also known as plastic deformation, is the ability of a solid material to undergo permanent deformation, a non-reversible change of shape in response to applied forces.[124][125] For example, a solid piece of metal being bent or pounded into a new shape displays plasticity as permanent changes occur within the material itself. In engineering, the transition from elastic behavior to plastic behavior is known as yielding.
- Pneumatics
- The control of mechanical force and movement, generated by the application of compressed gas.
- Point estimation
- In statistics, point estimation involves the use of sample data to calculate a single value (known as a point estimate since it identifies a point in some parameter space) which is to serve as a "best guess" or "best estimate" of an unknown population parameter (for example, the population mean). More formally, it is the application of a point estimator to the data to obtain a point estimate. Point estimation can be contrasted with interval estimation: such interval estimates are typically either confidence intervals, in the case of frequentist inference, or credible intervals, in the case of Bayesian inference. More generally, a point estimator can be contrasted with a set estimator. Examples are given by confidence sets or credible sets. A point estimator can also be contrasted with a distribution estimator. Examples are given by confidence distributions, randomized estimators, and Bayesian posteriors.
- Polyphase system
- An electrical system that uses a set of alternating currents at different phases.
- Power (electric)
- Electric power is the rate, per unit time, at which electrical energy is transferred by an electric circuit. The SI unit of power is the watt, one joule per second. Electric power is usually produced by electric generators, but can also be supplied by sources such as electric batteries. It is usually supplied to businesses and homes (as domestic mains electricity) by the electric power industry through an electric power grid. Electric power can be delivered over long distances by transmission lines and used for applications such as motion, light or heat with high efficiency.[126]
- Power (physics)
- In physics, power is the amount of energy transferred or converted per unit time. In the International System of Units, the unit of power is the watt, equal to one joule per second. In older works, power is sometimes called activity.[127][128][129] Power is a scalar quantity.
- Power factor
- In electrical engineering, the power factor of an AC power system is defined as the ratio of the real power absorbed by the load to the apparent power flowing in the circuit, and is a dimensionless number in the closed interval of −1 to 1. A power factor of less than one indicates the voltage and current are not in phase, reducing the average product of the two. Real power is the instantaneous product of voltage and current and represents the capacity of the electricity for performing work. Apparent power is the product of RMS current and voltage. Due to energy stored in the load and returned to the source, or due to a non-linear load that distorts the wave shape of the current drawn from the source, the apparent power may be greater than the real power. A negative power factor occurs when the device (which is normally the load) generates power, which then flows back towards the source.
- Pressure
- Pressure (symbol: p or P) is the force applied perpendicular to the surface of an object per unit area over which that force is distributed.: 445 [130] Gauge pressure (also spelled gage pressure)[d] is the pressure relative to the ambient pressure. Various units are used to express pressure. Some of these derive from a unit of force divided by a unit of area; the SI unit of pressure, the pascal (Pa), for example, is one newton per square metre (N/m2); similarly, the pound-force per square inch (psi) is the traditional unit of pressure in the imperial and U.S. customary systems. Pressure may also be expressed in terms of standard atmospheric pressure; the atmosphere (atm) is equal to this pressure, and the torr is defined as 1⁄760 of this. Manometric units such as the centimetre of water, millimetre of mercury, and inch of mercury are used to express pressures in terms of the height of column of a particular fluid in a manometer.
- Probability
- is the branch of mathematics concerning numerical descriptions of how likely an event is to occur, or how likely it is that a proposition is true. The probability of an event is a number between 0 and 1, where, roughly speaking, 0 indicates impossibility of the event and 1 indicates certainty.[note 4][131][132] The higher the probability of an event, the more likely it is that the event will occur. A simple example is the tossing of a fair (unbiased) coin. Since the coin is fair, the two outcomes ("heads" and "tails") are both equally probable; the probability of "heads" equals the probability of "tails"; and since no other outcomes are possible, the probability of either "heads" or "tails" is 1/2 (which could also be written as 0.5 or 50%).
- Probability distribution
- In probability theory and statistics, a probability distribution is the mathematical function that gives the probabilities of occurrence of different possible outcomes for an experiment.[133][134] It is a mathematical description of a random phenomenon in terms of its sample space and the probabilities of events (subsets of the sample space).[51] For instance, if X is used to denote the outcome of a coin toss ("the experiment"), then the probability distribution of X would take the value 0.5 (1 in 2 or 1/2) for X = heads, and 0.5 for X = tails (assuming that the coin is fair). Examples of random phenomena include the weather condition in a future date, the height of a randomly selected person, the fraction of male students in a school, the results of a survey to be conducted, etc.[135]
- Probability theory
- is the branch of mathematics concerned with probability. Although there are several different probability interpretations, probability theory treats the concept in a rigorous mathematical manner by expressing it through a set of axioms. Typically these axioms formalise probability in terms of a probability space, which assigns a measure taking values between 0 and 1, termed the probability measure, to a set of outcomes called the sample space. Any specified subset of these outcomes is called an event. Central subjects in probability theory include discrete and continuous random variables, probability distributions, and stochastic processes, which provide mathematical abstractions of non-deterministic or uncertain processes or measured quantities that may either be single occurrences or evolve over time in a random fashion. Although it is not possible to perfectly predict random events, much can be said about their behavior. Two major results in probability theory describing such behaviour are the law of large numbers and the central limit theorem. As a mathematical foundation for statistics, probability theory is essential to many human activities that involve quantitative analysis of data.[136] Methods of probability theory also apply to descriptions of complex systems given only partial knowledge of their state, as in statistical mechanics or sequential estimation. A great discovery of twentieth-century physics was the probabilistic nature of physical phenomena at atomic scales, described in quantum mechanics.[137][unreliable source?]
- Process
- Pulley
- is a wheel on an axle or shaft that is designed to support movement and change of direction of a taut cable or belt, or transfer of power between the shaft and cable or belt. In the case of a pulley supported by a frame or shell that does not transfer power to a shaft, but is used to guide the cable or exert a force, the supporting shell is called a block, and the pulley may be called a sheave. A pulley may have a groove or grooves between flanges around its circumference to locate the cable or belt. The drive element of a pulley system can be a rope, cable, belt, or chain.
- Pump
- is a device that moves fluids (liquids or gases), or sometimes slurries, by mechanical action, typically converted from electrical energy into hydraulic energy. Pumps can be classified into three major groups according to the method they use to move the fluid: direct lift, displacement, and gravity pumps.[138] Pumps operate by some mechanism (typically reciprocating or rotary), and consume energy to perform mechanical work moving the fluid. Pumps operate via many energy sources, including manual operation, electricity, engines, or wind power, and come in many sizes, from microscopic for use in medical applications, to large industrial pumps.
Q
[edit]- Quantum electrodynamics
- In particle physics, quantum electrodynamics (QED) is the relativistic quantum field theory of electrodynamics. In essence, it describes how light and matter interact and is the first theory where full agreement between quantum mechanics and special relativity is achieved. QED mathematically describes all phenomena involving electrically charged particles interacting by means of exchange of photons and represents the quantum counterpart of classical electromagnetism giving a complete account of matter and light interaction.
- Quantum field theory
- In theoretical physics, quantum field theory (QFT) is a theoretical framework that combines classical field theory, special relativity and quantum mechanics,[139]: xi but not general relativity's description of gravity. QFT is used in particle physics to construct physical models of subatomic particles and in condensed matter physics to construct models of quasiparticles.
- Quantum mechanics
- is a fundamental theory in physics that provides a description of the physical properties of nature at the scale of atoms and subatomic particles.[140]: 1.1 It is the foundation of all quantum physics including quantum chemistry, quantum field theory, quantum technology, and quantum information science.
R
[edit]- Regelation
- The phenomena of melting under pressure, then freezing when the pressure is reduced.
- Relative density
- Relative density, or specific gravity,[141][142] is the ratio of the density (mass of a unit volume) of a substance to the density of a given reference material. Specific gravity for liquids is nearly always measured with respect to water at its densest (at 4 °C or 39.2 °F); for gases, the reference is air at room temperature (20 °C or 68 °F). The term "relative density" is often preferred in scientific usage.
- Relative velocity
- The relative velocity (also or ) is the velocity of an object or observer B in the rest frame of another object or observer A.
- Reliability engineering
- is a sub-discipline of systems engineering that emphasizes the ability of equipment to function without failure. Reliability describes the ability of a system or component to function under stated conditions for a specified period of time.[143] Reliability is closely related to availability, which is typically described as the ability of a component or system to function at a specified moment or interval of time.
- Resistivity
- Electrical resistivity (also called specific electrical resistance or volume resistivity) and its inverse, electrical conductivity, is a fundamental property of a material that quantifies how strongly it resists or conducts electric current. A low resistivity indicates a material that readily allows electric current. Resistivity is commonly represented by the Greek letter ρ (rho). The SI unit of electrical resistivity is the ohm-meter (Ω⋅m).[144][145][146] For example, if a 1 m × 1 m × 1 m solid cube of material has sheet contacts on two opposite faces, and the resistance between these contacts is 1 Ω, then the resistivity of the material is 1 Ω⋅m.
- Resistor
- is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses. High-power resistors that can dissipate many watts of electrical power as heat, may be used as part of motor controls, in power distribution systems, or as test loads for generators. Fixed resistors have resistances that only change slightly with temperature, time or operating voltage. Variable resistors can be used to adjust circuit elements (such as a volume control or a lamp dimmer), or as sensing devices for heat, light, humidity, force, or chemical activity.
- Reynolds number
- The Reynolds number (Re) helps predict flow patterns in different fluid flow situations. At low Reynolds numbers, flows tend to be dominated by laminar (sheet-like) flow, while at high Reynolds numbers flows tend to be turbulent. The turbulence results from differences in the fluid's speed and direction, which may sometimes intersect or even move counter to the overall direction of the flow (eddy currents). These eddy currents begin to churn the flow, using up energy in the process, which for liquids increases the chances of cavitation. Reynolds numbers are an important dimensionless quantity in fluid mechanics.
- Rheology
- is the study of the flow of matter, primarily in a liquid or gas state, but also as "soft solids" or solids under conditions in which they respond with plastic flow rather than deforming elastically in response to an applied force. Rheology is a branch of physics, and it is the science that deals with the deformation and flow of materials, both solids and liquids.[147]
- Rigid body
- In physics, a rigid body (also known as a rigid object [148]) is a solid body in which deformation is zero or so small it can be neglected. The distance between any two given points on a rigid body remains constant in time regardless of external forces or moments exerted on it. A rigid body is usually considered as a continuous distribution of mass. In the study of special relativity, a perfectly rigid body does not exist; and objects can only be assumed to be rigid if they are not moving near the speed of light. In quantum mechanics, a rigid body is usually thought of as a collection of point masses. For instance, molecules (consisting of the point masses: electrons and nuclei) are often seen as rigid bodies (see classification of molecules as rigid rotors).
- Robonaut
- A development project conducted by NASA to create humanoid robots capable of using space tools and working in similar environments to suited astronauts.
- Robot-assisted surgery
- Robotic surgeries are types of surgical procedures that are done using robotic systems. Robotically-assisted surgery was developed to try to overcome the limitations of pre-existing minimally-invasive surgical procedures and to enhance the capabilities of surgeons performing open surgery. In the case of robotically-assisted minimally-invasive surgery, instead of directly moving the instruments, the surgeon uses one of two methods to administer the instruments. These include using a direct telemanipulator or through computer control. A telemanipulator is a remote manipulator that allows the surgeon to perform the normal movements associated with the surgery. The robotic arms carry out those movements using end-effectors and manipulators to perform the actual surgery. In computer-controlled systems, the surgeon uses a computer to control the robotic arms and its end-effectors, though these systems can also still use telemanipulators for their input. One advantage of using the computerized method is that the surgeon does not have to be present, leading to the possibility for remote surgery.
- Robotics
- Is an interdisciplinary field that integrates computer science and engineering.[149] Robotics involves design, construction, operation, and use of robots. The goal of robotics is to design machines that can help and assist humans. Robotics integrates fields of mechanical engineering, electrical engineering, information engineering, mechatronics, electronics, bioengineering, computer engineering, control engineering, software engineering, among others.
- Root mean square
- In mathematics and its applications, the root mean square (RMS or rms) is defined as the square root of the mean square (the arithmetic mean of the squares of a set of numbers).[150] The RMS is also known as the quadratic mean[151][152] and is a particular case of the generalized mean with exponent 2. RMS can also be defined for a continuously varying function in terms of an integral of the squares of the instantaneous values during a cycle. For alternating electric current, RMS is equal to the value of the constant direct current that would produce the same power dissipation in a resistive load.[150] In estimation theory, the root-mean-square deviation of an estimator is a measure of the imperfection of the fit of the estimator to the data.
- Root-mean-square speed
- In the physics of gas molecules, the root-mean-square speed is defined as the square root of the average squared-speed. The RMS speed of an ideal gas is calculated using the following equation:
- Rotational energy
- Rotational energy or angular kinetic energy is kinetic energy due to the rotation of an object and is part of its total kinetic energy. Looking at rotational energy separately around an object's axis of rotation, the following dependence on the object's moment of inertia is observed:
- is the angular velocity
- is the moment of inertia around the axis of rotation
- is the kinetic energy
- is rotational speed in cycles per second
- is angular speed in radians per second
- is angular speed in degrees per second
S
[edit]- Safe failure fraction (SFF)
- A term used in functional safety for the proportion of failures that are either non-hazardous or detected automatically. The opposite of SFF is the proportion of undetected, hazardous failures.[155]
- Safety data sheet
- A safety data sheet (SDS),[156] material safety data sheet (MSDS), or product safety data sheet (PSDS) are documents that list information relating to occupational safety and health for the use of various substances and products. SDSs are a widely used system for cataloguing information on chemicals, chemical compounds, and chemical mixtures. SDS information may include instructions for the safe use and potential hazards associated with a particular material or product, along with spill-handling procedures. The older MSDS formats could vary from source to source within a country depending on national requirements; however, the newer SDS format is internationally standardized.
- Sanitary engineering
- Sanitary engineering, also known as public health engineering or wastewater engineering, is the application of engineering methods to improve sanitation of human communities, primarily by providing the removal and disposal of human waste, and in addition to the supply of safe potable water.
- Saturated compound
- In chemistry, a saturated compound is a chemical compound (or ion) that resists the addition reactions, such as hydrogenation, oxidative addition, and binding of a Lewis base. The term is used in many contexts and for many classes of chemical compounds. Overall, saturated compounds are less reactive than unsaturated compounds. Saturation is derived from the Latin word saturare, meaning 'to fill')[157]
- Scalar (mathematics)
- .
- Scalar (physics)
- .
- Scalar multiplication
- In mathematics, scalar multiplication is one of the basic operations defining a vector space in linear algebra[158][159][160] (or more generally, a module in abstract algebra[161][162]). In common geometrical contexts, scalar multiplication of a real Euclidean vector by a positive real number multiplies the magnitude of the vector—without changing its direction. The term "scalar" itself derives from this usage: a scalar is that which scales vectors. Scalar multiplication is the multiplication of a vector by a scalar (where the product is a vector), and is to be distinguished from inner product of two vectors (where the product is a scalar).
- Screw
- A screw is a mechanism that converts rotational motion to linear motion, and a torque (rotational force) to a linear force.[163] It is one of the six classical simple machines. The most common form consists of a cylindrical shaft with helical grooves or ridges called threads around the outside.[164][165] The screw passes through a hole in another object or medium, with threads on the inside of the hole that mesh with the screw's threads. When the shaft of the screw is rotated relative to the stationary threads, the screw moves along its axis relative to the medium surrounding it; for example rotating a wood screw forces it into wood. In screw mechanisms, either the screw shaft can rotate through a threaded hole in a stationary object, or a threaded collar such as a nut can rotate around a stationary screw shaft.[166][167] Geometrically, a screw can be viewed as a narrow inclined plane wrapped around a cylinder.[163]
- Series circuit
- An electrical circuit in which the same current passes through each component, with only one path.
- Servo
- A motor that moves to and maintains a set position under command, rather than continuously moving.
- Servomechanism
- An automatic device that uses error-sensing negative feedback to correct the performance of a mechanism.
- Shadow matter
- In physics, mirror matter, also called shadow matter or Alice matter, is a hypothetical counterpart to ordinary matter.[168]
- Shear flow
- The term shear flow is used in solid mechanics as well as in fluid dynamics. The expression shear flow is used to indicate:
- a shear stress over a distance in a thin-walled structure (in solid mechanics);[169]
- the flow induced by a force (in a fluid).
- Shear strength
- is the strength of a material or component against the type of yield or structural failure when the material or component fails in shear. A shear load is a force that tends to produce a sliding failure on a material along a plane that is parallel to the direction of the force. When a paper is cut with scissors, the paper fails in shear. In structural and mechanical engineering, the shear strength of a component is important for designing the dimensions and materials to be used for the manufacture or construction of the component (e.g. beams, plates, or bolts). In a reinforced concrete beam, the main purpose of reinforcing bar (rebar) stirrups is to increase the shear strength.
- Shear stress
- Shear stress, often denoted by τ (Greek: tau), is the component of stress coplanar with a material cross section. It arises from the shear force, the component of force vector parallel to the material cross section. Normal stress, on the other hand, arises from the force vector component perpendicular to the material cross section on which it acts.
- Shortwave radiation
- Shortwave radiation (SW) is radiant energy with wavelengths in the visible (VIS), near-ultraviolet (UV), and near-infrared (NIR) spectra. There is no standard cut-off for the near-infrared range; therefore, the shortwave radiation range is also variously defined. It may be broadly defined to include all radiation with a wavelength of 0.1μm and 5.0μm or narrowly defined so as to include only radiation between 0.2μm and 3.0μm. There is little radiation flux (in terms of W/m2) to the Earth's surface below 0.2μm or above 3.0μm, although photon flux remains significant as far as 6.0μm, compared to shorter wavelength fluxes. UV-C radiation spans from 0.1μm to .28μm, UV-B from 0.28μm to 0.315μm, UV-A from 0.315μm to 0.4μm, the visible spectrum from 0.4μm to 0.7μm, and NIR arguably from 0.7μm to 5.0μm, beyond which the infrared is thermal.[170] Shortwave radiation is distinguished from longwave radiation. Downward shortwave radiation is sensitive to solar zenith angle, cloud cover.[171]
- SI units
- The International System of Units (SI, abbreviated from the French Système international (d'unités)) is the modern form of the metric system. It is the only system of measurement with an official status in nearly every country in the world. It comprises a coherent system of units of measurement starting with seven base units, which are the second (the unit of time with the symbol s), metre (length, m), kilogram (mass, kg), ampere (electric current, A), kelvin (thermodynamic temperature, K), mole (amount of substance, mol), and candela (luminous intensity, cd). The system allows for an unlimited number of additional units, called derived units, which can always be represented as products of powers of the base units.[e] Twenty-two derived units have been provided with special names and symbols.[f] The seven base units and the 22 derived units with special names and symbols may be used in combination to express other derived units,[g] which are adopted to facilitate measurement of diverse quantities. The SI also provides twenty prefixes to the unit names and unit symbols that may be used when specifying power-of-ten (i.e. decimal) multiples and sub-multiples of SI units. The SI is intended to be an evolving system; units and prefixes are created and unit definitions are modified through international agreement as the technology of measurement progresses and the precision of measurements improves.
- Signal processing
- Is an electrical engineering subfield that focuses on analysing, modifying, and synthesizing signals such as sound, images, and scientific measurements.[172] Signal processing techniques can be used to improve transmission, storage efficiency and subjective quality and to also emphasize or detect components of interest in a measured signal.[173]
- Simple machine
- is a mechanical device that changes the direction or magnitude of a force.[174] In general, they can be defined as the simplest mechanisms that use mechanical advantage (also called leverage) to multiply force.[175] Usually the term refers to the six classical simple machines that were defined by Renaissance scientists:[176][177][178]
- Siphon
- A closed tube that conveys liquids between two levels without pumping.
- Solid mechanics
- also known as mechanics of solids, is the branch of continuum mechanics that studies the behavior of solid materials, especially their motion and deformation under the action of forces, temperature changes, phase changes, and other external or internal agents.
- Solid-state physics
- is the study of rigid matter, or solids, through methods such as quantum mechanics, crystallography, electromagnetism, and metallurgy. It is the largest branch of condensed matter physics. Solid-state physics studies how the large-scale properties of solid materials result from their atomic-scale properties. Thus, solid-state physics forms a theoretical basis of materials science. It also has direct applications, for example in the technology of transistors and semiconductors.
- Solid solution strengthening
- is a type of alloying that can be used to improve the strength of a pure metal. The technique works by adding atoms of one element (the alloying element) to the crystalline lattice of another element (the base metal), forming a solid solution. The local nonuniformity in the lattice due to the alloying element makes plastic deformation more difficult by impeding dislocation motion through stress fields. In contrast, alloying beyond the solubility limit can form a second phase, leading to strengthening via other mechanisms (e.g. the precipitation of intermetallic compounds).
- Solubility
- is the property of a solid, liquid or gaseous chemical substance called solute to dissolve in a solid, liquid or gaseous solvent. The solubility of a substance fundamentally depends on the physical and chemical properties of the solute and solvent as well as on temperature, pressure and presence of other chemicals (including changes to the pH) of the solution. The extent of the solubility of a substance in a specific solvent is measured as the saturation concentration, where adding more solute does not increase the concentration of the solution and begins to precipitate the excess amount of solute.
- Solubility equilibrium
- is a type of dynamic equilibrium that exists when a chemical compound in the solid state is in chemical equilibrium with a solution of that compound. The solid may dissolve unchanged, with dissociation or with chemical reaction with another constituent of the solution, such as acid or alkali. Each solubility equilibrium is characterized by a temperature-dependent solubility product which functions like an equilibrium constant. Solubility equilibria are important in pharmaceutical, environmental and many other scenarios.
- Sound
- In physics, sound is a vibration that propagates as an acoustic wave, through a transmission medium such as a gas, liquid or solid.
- Special relativity
- In physics, the special theory of relativity, or special relativity for short, is a scientific theory regarding the relationship between space and time. In Albert Einstein's original treatment, the theory is based on two postulates:[179][180][181]
- The laws of physics are invariant (that is, identical) in all inertial frames of reference (that is, frames of reference with no acceleration).
- The speed of light in vacuum is the same for all observers, regardless of the motion of the light source or observer.
- Specific heat
- The amount of energy required to change the temperature of a unit mass of substance by one degree.
- Specific gravity
- The ratio between the mass density of a substance to that of water.
- Specific volume
- The volume of a unit mass of a substance.
- Specific weight
- The weight of a substance per unit volume.
- Spontaneous combustion
- Spontaneous combustion or spontaneous ignition is a type of combustion which occurs by self-heating (increase in temperature due to exothermic internal reactions), followed by thermal runaway (self heating which rapidly accelerates to high temperatures) and finally, autoignition.[182]
- Stagnation pressure
- In fluid dynamics, stagnation pressure (or pitot pressure) is the static pressure at a stagnation point in a fluid flow.[183] At a stagnation point the fluid velocity is zero. In an incompressible flow, stagnation pressure is equal to the sum of the free-stream static pressure and the free-stream dynamic pressure.[184]
- Standard electrode potential
- .
- State of matter
- In physics, a state of matter is one of the distinct forms in which matter can exist. Four states of matter are observable in everyday life: solid, liquid, gas, and plasma. Many intermediate states are known to exist, such as liquid crystal, and some states only exist under extreme conditions, such as Bose–Einstein condensates, neutron-degenerate matter, and quark–gluon plasma, which only occur, respectively, in situations of extreme cold, extreme density, and extremely high energy. For a complete list of all exotic states of matter, see the list of states of matter.
- Statics
- The study of forces in a non-moving, rigid body.
- Statistics
- is the discipline that concerns the collection, organization, analysis, interpretation, and presentation of data.[185][186][187] In applying statistics to a scientific, industrial, or social problem, it is conventional to begin with a statistical population or a statistical model to be studied. Populations can be diverse groups of people or objects such as "all people living in a country" or "every atom composing a crystal". Statistics deals with every aspect of data, including the planning of data collection in terms of the design of surveys and experiments.[188]
- Steam table
- Thermodynamic data table containing steam or water properties .[189]
- Stefan–Boltzmann law
- The Stefan–Boltzmann law describes the power radiated from a black body in terms of its temperature. Specifically, the Stefan–Boltzmann law states that the total energy radiated per unit surface area of a black body across all wavelengths per unit time (also known as the black-body radiant emittance) is directly proportional to the fourth power of the black body's thermodynamic temperature T:
- Stewart platform
- is a type of parallel manipulator that has six prismatic actuators, commonly hydraulic jacks or electric linear actuators, attached in pairs to three positions on the platform's baseplate, crossing over to three mounting points on a top plate. All 12 connections are made via universal joints. Devices placed on the top plate can be moved in the six degrees of freedom in which it is possible for a freely-suspended body to move: three linear movements x, y, z (lateral, longitudinal, and vertical), and the three rotations (pitch, roll, and yaw).
- Stiffness
- is the extent to which an object resists deformation in response to an applied force.[192] The complementary concept is flexibility or pliability: the more flexible an object is, the less stiff it is.[193]
- Stoichiometry
- refers to the relationship between the quantities of reactants and products before, during, and following chemical reactions. Stoichiometry is founded on the law of conservation of mass where the total mass of the reactants equals the total mass of the products, leading to the insight that the relations among quantities of reactants and products typically form a ratio of positive integers. This means that if the amounts of the separate reactants are known, then the amount of the product can be calculated. Conversely, if one reactant has a known quantity and the quantity of the products can be empirically determined, then the amount of the other reactants can also be calculated.
- Strain
- .
- Strain hardening
- Work hardening, also known as strain hardening, is the strengthening of a metal or polymer by plastic deformation. Work hardening may be desirable, undesirable, or inconsequential, depending on the context. This strengthening occurs because of dislocation movements and dislocation generation within the crystal structure of the material.[194] Many non-brittle metals with a reasonably high melting point as well as several polymers can be strengthened in this fashion.[195] Alloys not amenable to heat treatment, including low-carbon steel, are often work-hardened. Some materials cannot be work-hardened at low temperatures, such as indium,[196] however others can be strengthened only via work hardening, such as pure copper and aluminum.[197]
- Strength of materials
- The field of strength of materials, also called mechanics of materials, typically refers to various methods of calculating the stresses and strains in structural members, such as beams, columns, and shafts. The methods employed to predict the response of a structure under loading and its susceptibility to various failure modes takes into account the properties of the materials such as its yield strength, ultimate strength, Young's modulus, and Poisson's ratio. In addition, the mechanical element's macroscopic properties (geometric properties) such as its length, width, thickness, boundary constraints and abrupt changes in geometry such as holes are considered.
- Stress
- In continuum mechanics, stress is a physical quantity that expresses the internal forces that neighbouring particles of a continuous material exert on each other, while strain is the measure of the deformation of the material. For example, when a solid vertical bar is supporting an overhead weight, each particle in the bar pushes on the particles immediately below it. When a liquid is in a closed container under pressure, each particle gets pushed against by all the surrounding particles. The container walls and the pressure-inducing surface (such as a piston) push against them in (Newtonian) reaction. These macroscopic forces are actually the net result of a very large number of intermolecular forces and collisions between the particles in those molecules. Stress is frequently represented by a lowercase Greek letter sigma (σ).
- Stress–strain analysis
- Stress–strain analysis (or stress analysis) is an engineering discipline that uses many methods to determine the stresses and strains in materials and structures subjected to forces. In continuum mechanics, stress is a physical quantity that expresses the internal forces that neighboring particles of a continuous material exert on each other, while strain is the measure of the deformation of the material. In simple terms we can define stress as the force of resistance per unit per unit area, offered by a body against deformation. Stress is the ratio of force over area (S =R/A, where S is the stress, R is the internal resisting force and A is the cross-sectional area). Strain is the ratio of change in length to the original length, when a given body is subjected to some external force (Strain= change in length÷the original length).
- Stress–strain curve
- In engineering and materials science, a stress–strain curve for a material gives the relationship between stress and strain. It is obtained by gradually applying load to a test coupon and measuring the deformation, from which the stress and strain can be determined (see tensile testing). These curves reveal many of the properties of a material, such as the Young's modulus, the yield strength and the ultimate tensile strength.
- Structural analysis
- is the determination of the effects of loads on physical structures and their components. Structures subject to this type of analysis include all that must withstand loads, such as buildings, bridges, aircraft and ships. Structural analysis employs the fields of applied mechanics, materials science and applied mathematics to compute a structure's deformations, internal forces, stresses, support reactions, accelerations, and stability. The results of the analysis are used to verify a structure's fitness for use, often precluding physical tests. Structural analysis is thus a key part of the engineering design of structures.[198]
- Structural load
- A structural load or structural action is a force, deformation, or acceleration applied to structural elements.[199][200] A load causes stress, deformation, and displacement in a structure. Structural analysis, a discipline in engineering, analyzes the effects loads on structures and structural elements. Excess load may cause structural failure, so this should be considered and controlled during the design of a structure. Particular mechanical structures—such as aircraft, satellites, rockets, space stations, ships, and submarines—are subject to their own particular structural loads and actions.[201] Engineers often evaluate structural loads based upon published regulations, contracts, or specifications. Accepted technical standards are used for acceptance testing and inspection.
- Sublimation
- is the transition of a substance directly from the solid to the gas state,[202] without passing through the liquid state.[203] Sublimation is an endothermic process that occurs at temperatures and pressures below a substance's triple point in its phase diagram, which corresponds to the lowest pressure at which the substance can exist as a liquid. The reverse process of sublimation is deposition or desublimation, in which a substance passes directly from a gas to a solid phase.[204] Sublimation has also been used as a generic term to describe a solid-to-gas transition (sublimation) followed by a gas-to-solid transition (deposition).[205] While vaporization from liquid to gas occurs as evaporation from the surface if it occurs below the boiling point of the liquid, and as boiling with formation of bubbles in the interior of the liquid if it occurs at the boiling point, there is no such distinction for the solid-to-gas transition which always occurs as sublimation from the surface.
- Subsumption architecture
- is a reactive robotic architecture heavily associated with behavior-based robotics which was very popular in the 1980s and 90s. The term was introduced by Rodney Brooks and colleagues in 1986.[206][207][208] Subsumption has been widely influential in autonomous robotics and elsewhere in real-time AI.
- Surface tension
- is the tendency of liquid surfaces at rest to shrink into the minimum surface area possible. Surface tension is what allows objects with a higher density than water to float on a water surface without becoming even partly submerged.
- Superconductivity
- is a set of physical properties observed in certain materials where electrical resistance vanishes and magnetic flux fields are expelled from the material. Any material exhibiting these properties is a superconductor. Unlike an ordinary metallic conductor, whose resistance decreases gradually as its temperature is lowered even down to near absolute zero, a superconductor has a characteristic critical temperature below which the resistance drops abruptly to zero. An electric current through a loop of superconducting wire can persist indefinitely with no power source.[209][210][211][212]
- Superhard material
- is a material with a hardness value exceeding 40 gigapascals (GPa) when measured by the Vickers hardness test.[213][214][215][216] They are virtually incompressible solids with high electron density and high bond covalency. As a result of their unique properties, these materials are of great interest in many industrial areas including, but not limited to, abrasives, polishing and cutting tools, disc brakes, and wear-resistant and protective coatings.
- Supersaturation
- Supersaturation occurs with a chemical solution when the concentration of a solute exceeds the concentration specified by the value equilibrium solubility. Most commonly the term is applied to a solution of a solid in a liquid. A supersaturated solution is in a metastable state; it may be brought to equilibrium by forcing the excess of solute to separate from the solution. The term can also be applied to a mixture of gases.
T
[edit]- Tangential acceleration
- The velocity of a particle moving on a curved path as a function of time can be written as:
- Technical standard
- A technical standard is an established norm or requirement for a repeatable technical task. It is usually a formal document that establishes uniform engineering or technical criteria, methods, processes, and practices. In contrast, a custom, convention, company product, corporate standard, and so forth that becomes generally accepted and dominant is often called a de facto standard.
- Temperature
- is a physical quantity that expresses hot and cold. It is the manifestation of thermal energy, present in all matter, which is the source of the occurrence of heat, a flow of energy, when a body is in contact with another that is colder. Temperature is measured with a thermometer. Thermometers are calibrated in various temperature scales that historically have used various reference points and thermometric substances for definition. The most common scales are the Celsius scale (formerly called centigrade, denoted °C), the Fahrenheit scale (denoted °F), and the Kelvin scale (denoted K), the last of which is predominantly used for scientific purposes by conventions of the International System of Units (SI).
- Tempering (metallurgy)
- Heat treatment to alter the crystal structure of a metal such as steel.
- Tensile force
- Pulling force, tending to lengthen an object.
- Tensile modulus
- Young's modulus , the Young modulus, or the modulus of elasticity in tension, is a mechanical property that measures the tensile stiffness of a solid material. It quantifies the relationship between tensile stress (force per unit area) and axial strain (proportional deformation) in the linear elastic region of a material and is determined using the formula:[220] Young's moduli are typically so large that they are expressed not in pascals but in gigapascals (GPa).
- Tensile strength
- Ultimate tensile strength (UTS), often shortened to tensile strength (TS), ultimate strength, or within equations,[221][222][223] is the maximum stress that a material can withstand while being stretched or pulled before breaking. In brittle materials the ultimate tensile strength is close to the yield point, whereas in ductile materials the ultimate tensile strength can be higher.
- Tensile testing
- Tensile testing, also known as tension testing,[224] is a fundamental materials science and engineering test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength, breaking strength, maximum elongation and reduction in area.[225] From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics.[226] Uniaxial tensile testing is the most commonly used for obtaining the mechanical characteristics of isotropic materials. Some materials use biaxial tensile testing. The main difference between these testing machines being how load is applied on the materials.
- Tension member
- Tension members are structural elements that are subjected to axial tensile forces. Examples of tension members are bracing for buildings and bridges, truss members, and cables in suspended roof systems.
- Thermal conduction
- is the transfer of internal energy by microscopic collisions of particles and movement of electrons within a body. The colliding particles, which include molecules, atoms and electrons, transfer disorganized microscopic kinetic and potential energy, jointly known as internal energy. Conduction takes place in all phases: solid, liquid, and gas.
- Thermal equilibrium
- Two physical systems are in thermal equilibrium if there is no net flow of thermal energy between them when they are connected by a path permeable to heat. Thermal equilibrium obeys the zeroth law of thermodynamics. A system is said to be in thermal equilibrium with itself if the temperature within the system is spatially uniform and temporally constant. Systems in thermodynamic equilibrium are always in thermal equilibrium, but the converse is not always true. If the connection between the systems allows transfer of energy as 'change in internal energy' but does not allow transfer of matter or transfer of energy as work, the two systems may reach thermal equilibrium without reaching thermodynamic equilibrium.
- Thermal radiation
- is electromagnetic radiation generated by the thermal motion of particles in matter. All matter with a temperature greater than absolute zero emits thermal radiation. Particle motion results in charge-acceleration or dipole oscillation which produces electromagnetic radiation.
- Thermodynamics
- is a branch of physics that deals with heat, work, and temperature, and their relation to energy, radiation, and physical properties of matter. The behavior of these quantities is governed by the four laws of thermodynamics which convey a quantitative description using measurable macroscopic physical quantities, but may be explained in terms of microscopic constituents by statistical mechanics. Thermodynamics applies to a wide variety of topics in science and engineering, especially physical chemistry, biochemistry, chemical engineering and mechanical engineering, but also in other complex fields such as meteorology.
- Theory of relativity
- usually encompasses two interrelated theories by Albert Einstein: special relativity and general relativity, proposed and published in 1905 and 1915, respectively.[227] Special relativity applies to all physical phenomena in the absence of gravity. General relativity explains the law of gravitation and its relation to other forces of nature.[228] It applies to the cosmological and astrophysical realm, including astronomy.[229]
- Thévenin's theorem
- As originally stated in terms of direct-current resistive circuits only, Thévenin's theorem states that "For any linear electrical network containing only voltage sources, current sources and resistances can be replaced at terminals A–B by an equivalent combination of a voltage source Vth in a series connection with a resistance Rth."
- The equivalent voltage Vth is the voltage obtained at terminals A–B of the network with terminals A–B open circuited.
- The equivalent resistance Rth is the resistance that the circuit between terminals A and B would have if all ideal voltage sources in the circuit were replaced by a short circuit and all ideal current sources were replaced by an open circuit.
- If terminals A and B are connected to one another, the current flowing from A to B will be Vth/Rth. This means that Rth could alternatively be calculated as Vth divided by the short-circuit current between A and B when they are connected together.
- Three-phase electric power
- is a common method of alternating current electric power generation, transmission, and distribution.[230] It is a type of polyphase system and is the most common method used by electrical grids worldwide to transfer power. It is also used to power large motors and other heavy loads.
- Torque
- In physics and mechanics, torque is the rotational equivalent of linear force.[231] It is also referred to as the moment, moment of force, rotational force or turning effect, depending on the field of study. The concept originated with the studies by Archimedes of the usage of levers. Just as a linear force is a push or a pull, a torque can be thought of as a twist to an object around a specific axis. Another definition of torque is the product of the magnitude of the force and the perpendicular distance of the line of action of a force from the axis of rotation. The symbol for torque is typically or τ, the lowercase Greek letter tau. When being referred to as moment of force, it is commonly denoted by M.
- Torsional vibration
- is angular vibration of an object—commonly a shaft along its axis of rotation. Torsional vibration is often a concern in power transmission systems using rotating shafts or couplings where it can cause failures if not controlled. A second effect of torsional vibrations applies to passenger cars. Torsional vibrations can lead to seat vibrations or noise at certain speeds. Both reduce the comfort.
- Toughness
- In materials science and metallurgy, toughness is the ability of a material to absorb energy and plastically deform without fracturing.[232] One definition of material toughness is the amount of energy per unit volume that a material can absorb before rupturing. This measure of toughness is different from that used for fracture toughness, which describes load bearing capabilities of materials with flaws.[233] It is also defined as a material's resistance to fracture when stressed. Toughness requires a balance of strength and ductility.[232]
- Trajectory
- A trajectory or flight path is the path that an object with mass in motion follows through space as a function of time. In classical mechanics, a trajectory is defined by Hamiltonian mechanics via canonical coordinates; hence, a complete trajectory is defined by position and momentum, simultaneously. The mass might be a projectile or a satellite.[234] For example, it can be an orbit — the path of a planet, asteroid, or comet as it travels around a central mass. In control theory, a trajectory is a time-ordered set of states of a dynamical system (see e.g. Poincaré map). In discrete mathematics, a trajectory is a sequence of values calculated by the iterated application of a mapping to an element of its source.
- Transducer
- is a device that converts energy from one form to another. Usually a transducer converts a signal in one form of energy to a signal in another.[235] Transducers are often employed at the boundaries of automation, measurement, and control systems, where electrical signals are converted to and from other physical quantities (energy, force, torque, light, motion, position, etc.). The process of converting one form of energy to another is known as transduction.[236]
- Transformer
- is a passive component that transfers electrical energy from one electrical circuit to another circuit, or multiple circuits. A varying current in any one coil of the transformer produces a varying magnetic flux in the transformer's core, which induces a varying electromotive force across any other coils wound around the same core. Electrical energy can be transferred between separate coils without a metallic (conductive) connection between the two circuits. Faraday's law of induction, discovered in 1831, describes the induced voltage effect in any coil due to a changing magnetic flux encircled by the coil.
- Trigonometric functions
- In mathematics, the trigonometric functions (also called circular functions, angle functions or goniometric functions[237][238]) are real functions which relate an angle of a right-angled triangle to ratios of two side lengths. They are widely used in all sciences that are related to geometry, such as navigation, solid mechanics, celestial mechanics, geodesy, and many others. They are among the simplest periodic functions, and as such are also widely used for studying periodic phenomena through Fourier analysis. The trigonometric functions most widely used in modern mathematics are the sine, the cosine, and the tangent. Their reciprocals are respectively the cosecant, the secant, and the cotangent, which are less used. Each of these six trigonometric functions has a corresponding inverse function, and an analog among the hyperbolic functions.
- Trigonometry
- Is a branch of mathematics that studies relationships between side lengths and angles of triangles. The field emerged in the Hellenistic world during the 3rd century BC from applications of geometry to astronomical studies.[239] The Greeks focused on the calculation of chords, while mathematicians in India created the earliest-known tables of values for trigonometric ratios (also called trigonometric functions) such as sine.[240]
- Trimean
- The trimean is a measure of a probability distribution's location defined as a weighted average of the distribution's median and its two quartiles
- Triple point
- In thermodynamics, the triple point of a substance is the temperature and pressure at which the three phases (gas, liquid, and solid) of that substance coexist in thermodynamic equilibrium.[241] It is that temperature and pressure at which the sublimation curve, fusion curve and the vaporisation curve meet. For example, the triple point of mercury occurs at a temperature of −38.83440 °C (−37.90192 °F) and a pressure of 0.165 mPa. In addition to the triple point for solid, liquid, and gas phases, a triple point may involve more than one solid phase, for substances with multiple polymorphs. Helium-4 is a special case that presents a triple point involving two different fluid phases (lambda point).[241]
- Trouton's rule
- Trouton's rule states that the entropy of vaporization is almost the same value, about 85–88 J/(K·mol), for various kinds of liquids at their boiling points.[242] The entropy of vaporization is defined as the ratio between the enthalpy of vaporization and the boiling temperature. It is named after Frederick Thomas Trouton.
It can be expressed as a function of the gas constant R:
U
[edit]- Ultimate tensile strength
- Ultimate tensile strength (UTS), often shortened to tensile strength (TS), ultimate strength, or Ftu within equations,[221][222][223] is the capacity of a material or structure to withstand loads tending to elongate, as opposed to compressive strength, which withstands loads tending to reduce size. In other words, tensile strength resists tension (being pulled apart), whereas compressive strength resists compression (being pushed together). Ultimate tensile strength is measured by the maximum stress that a material can withstand while being stretched or pulled before breaking. In the study of strength of materials, tensile strength, compressive strength, and shear strength can be analyzed independently.
- Uncertainty principle
- In quantum mechanics, the uncertainty principle (also known as Heisenberg's uncertainty principle) is any of a variety of mathematical inequalities[249] asserting a fundamental limit to the precision with which certain pairs of physical properties of a particle, known as complementary variables, such as position x and momentum p, can be known.
- Unicode
- A standard for the consistent encoding of textual characters.
- Unit vector
- In mathematics, a unit vector in a normed vector space is a vector (often a spatial vector) of length 1. A unit vector is often denoted by a lowercase letter with a circumflex, or "hat": (pronounced "i-hat"). The term direction vector is used to describe a unit vector being used to represent spatial direction, and such quantities are commonly denoted as d. .
- Unsaturated compound
- .
- Upthrust
- Buoyancy, or upthrust, is an upward force exerted by a fluid that opposes the weight of a partially or fully immersed object. In a column of fluid, pressure increases with depth as a result of the weight of the overlying fluid. Thus the pressure at the bottom of a column of fluid is greater than at the top of the column. Similarly, the pressure at the bottom of an object submerged in a fluid is greater than at the top of the object. The pressure difference results in a net upward force on the object. The magnitude of the force is proportional to the pressure difference, and (as explained by Archimedes' principle) is equivalent to the weight of the fluid that would otherwise occupy the submerged volume of the object, i.e. the displaced fluid.
- Utility frequency
- The utility frequency, (power) line frequency (American English) or mains frequency (British English) is the nominal frequency of the oscillations of alternating current (AC) in a wide area synchronous grid transmitted from a power station to the end-user. In large parts of the world this is 50 Hz, although in the Americas and parts of Asia it is typically 60 Hz. Current usage by country or region is given in the list of mains electricity by country.
V
[edit]- Vacuole
- is a membrane-bound organelle which is present in plant and fungal cells and some protist, animal[250] and bacterial cells.[251] Vacuoles are essentially enclosed compartments which are filled with water containing inorganic and organic molecules including enzymes in solution, though in certain cases they may contain solids which have been engulfed. Vacuoles are formed by the fusion of multiple membrane vesicles and are effectively just larger forms of these.[252] The organelle has no basic shape or size; its structure varies according to the requirements of the cell.
- Vacuum
- An absence of mass in a volume.
- Valence
- In chemistry, the valence or valency of an element is a measure of its combining power with other atoms when it forms chemical compounds or molecules. The concept of valence developed in the second half of the 19th century and helped successfully explain the molecular structure of inorganic and organic compounds.[253] The quest for the underlying causes of valence led to the modern theories of chemical bonding, including the cubical atom (1902), Lewis structures (1916), valence bond theory (1927), molecular orbitals (1928), valence shell electron pair repulsion theory (1958), and all of the advanced methods of quantum chemistry.
- Valence band
- In solid-state physics, the valence band and conduction band are the bands closest to the Fermi level and thus determine the electrical conductivity of the solid. In non-metals, the valence band is the highest range of electron energies in which electrons are normally present at absolute zero temperature, while the conduction band is the lowest range of vacant electronic states. On a graph of the electronic band structure of a material, the valence band is located below the Fermi level, while the conduction band is located above it. The distinction between the valence and conduction bands is meaningless in metals, because conduction occurs in one or more partially filled bands that take on the properties of both the valence and conduction bands.
- Valence bond theory
- In chemistry, valence bond (VB) theory is one of the two basic theories, along with molecular orbital (MO) theory, that were developed to use the methods of quantum mechanics to explain chemical bonding. It focuses on how the atomic orbitals of the dissociated atoms combine to give individual chemical bonds when a molecule is formed. In contrast, molecular orbital theory has orbitals that cover the whole molecule.[254]
- Valence electron
- In chemistry and physics, a valence electron is an outer shell electron that is associated with an atom, and that can participate in the formation of a chemical bond if the outer shell is not closed; in a single covalent bond, both atoms in the bond contribute one valence electron in order to form a shared pair.
- Valence shell
- The valence shell is the set of orbitals which are energetically accessible for accepting electrons to form chemical bonds. For main group elements, the valence shell consists of the ns and np orbitals in the outermost electron shell. In the case of transition metals (the (n-1)d orbitals), and lanthanides and actinides (the (n-2)f and (n-1)d orbitals), the orbitals involved can also be in an inner electron shell. Thus, the shell terminology is a misnomer as there is no correspondence between the valence shell and any particular electron shell in a given element. A scientifically correct term would be valence orbital to refer to the energetically accessible orbitals of an element.
- Valve
- is a device or natural object that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure. The word is derived from the Latin valva, the moving part of a door, in turn from volvere, to turn, roll.
- van der Waals equation
- In chemistry and thermodynamics, the Van der Waals equation (or Van der Waals equation of state; named after Dutch physicist Johannes Diderik van der Waals) is an equation of state that generalizes the ideal gas law based on plausible reasons that real gases do not act ideally. The ideal gas law treats gas molecules as point particles that interact with their containers but not each other, meaning they neither take up space nor change kinetic energy during collisions (i.e. all collisions are perfectly elastic).[255] The ideal gas law states that volume (V) occupied by n moles of any gas has a pressure (P) at temperature (T) in kelvins given by the following relationship, where R is the gas constant:
- van der Waals force
- In molecular physics, the Van der Waals force, named after Dutch physicist Johannes Diderik van der Waals, is a distance-dependent interaction between atoms or molecules. Unlike ionic or covalent bonds, these attractions do not result from a chemical electronic bond; they are comparatively weak and therefore more susceptible to disturbance. The Van der Waals force quickly vanishes at longer distances between interacting molecules.
- van 't Hoff equation
- relates the change in the equilibrium constant, Keq, of a chemical reaction to the change in temperature, T, given the standard enthalpy change, ΔrH⊖, for the process. It was proposed by Dutch chemist Jacobus Henricus van 't Hoff in 1884 in his book Études de dynamique chimique (Studies in Dynamic Chemistry).[256] The Van 't Hoff equation has been widely utilized to explore the changes in state functions in a thermodynamic system. The Van 't Hoff plot, which is derived from this equation, is especially effective in estimating the change in enthalpy and entropy of a chemical reaction.
- van 't Hoff factor
- is a measure of the effect of a solute on colligative properties such as osmotic pressure, relative lowering in vapor pressure, boiling-point elevation and freezing-point depression. The Van 't Hoff factor is the ratio between the actual concentration of particles produced when the substance is dissolved and the concentration of a substance as calculated from its mass. For most non-electrolytes dissolved in water, the Van 't Hoff factor is essentially 1. For most ionic compounds dissolved in water, the Van 't Hoff factor is equal to the number of discrete ions in a formula unit of the substance. This is true for ideal solutions only, as occasionally ion pairing occurs in solution. At a given instant a small percentage of the ions are paired and count as a single particle. Ion pairing occurs to some extent in all electrolyte solutions. This causes the measured Van 't Hoff factor to be less than that predicted in an ideal solution. The deviation for the Van 't Hoff factor tends to be greatest where the ions have multiple charges.
- Variable capacitor
- is a capacitor whose capacitance may be intentionally and repeatedly changed mechanically or electronically. Variable capacitors are often used in L/C circuits to set the resonance frequency, e.g. to tune a radio (therefore it is sometimes called a tuning capacitor or tuning condenser), or as a variable reactance, e.g. for impedance matching in antenna tuners.
- Variable resistor
- .
- Vector space
- A vector space (also called a linear space) is a set of objects called vectors, which may be added together and multiplied ("scaled") by numbers, called scalars. Scalars are often taken to be real numbers, but there are also vector spaces with scalar multiplication by complex numbers, rational numbers, or generally any field. The operations of vector addition and scalar multiplication must satisfy certain requirements, called vector axioms . To specify that the scalars are real or complex numbers, the terms real vector space and complex vector space are often used.
- Venturi effect
- is the reduction in fluid pressure that results when a fluid flows through a constricted section (or choke) of a pipe. The Venturi effect is named after its discoverer, the 18th century Italian physicist, Giovanni Battista Venturi.
- Vibration
- is a mechanical phenomenon whereby oscillations occur about an equilibrium point. The word comes from Latin vibrationem ("shaking, brandishing"). The oscillations may be periodic, such as the motion of a pendulum—or random, such as the movement of a tire on a gravel road. Vibration can be desirable: for example, the motion of a tuning fork, the reed in a woodwind instrument or harmonica, a mobile phone, or the cone of a loudspeaker. In many cases, however, vibration is undesirable, wasting energy and creating unwanted sound. For example, the vibrational motions of engines, electric motors, or any mechanical device in operation are typically unwanted. Such vibrations could be caused by imbalances in the rotating parts, uneven friction, or the meshing of gear teeth. Careful designs usually minimize unwanted vibrations.
- Virtual leak
- Traces of gas trapped in cavities within a vacuum chamber, slowly dissipating out in the main chamber, thus appearing like a leak from the outside.
- Viscoelasticity
- In materials science and continuum mechanics, viscoelasticity is the property of materials that exhibit both viscous and elastic characteristics when undergoing deformation. Viscous materials, like water, resist shear flow and strain linearly with time when a stress is applied. Elastic materials strain when stretched and immediately return to their original state once the stress is removed. Viscoelastic materials have elements of both of these properties and, as such, exhibit time-dependent strain. Whereas elasticity is usually the result of bond stretching along crystallographic planes in an ordered solid, viscosity is the result of the diffusion of atoms or molecules inside an amorphous material.[257]
- Viscosity
- The viscosity of a fluid is the measure of its resistance to gradual deformation by shear stress or tensile stress.[258] For liquids, it corresponds to the informal concept of "thickness": for example, honey has a higher viscosity than water.[259]
- Volt-ampere
- (VA), is the unit used for the apparent power in an electrical circuit. The apparent power equals the product of root-mean-square (RMS) voltage and RMS current.[260] In direct current (DC) circuits, this product is equal to the real power (active power)[261] in watts. Volt-amperes are useful only in the context of alternating current (AC) circuits. The volt-ampere is dimensionally equivalent to the watt (in SI units, 1 VA = 1 N m A−1 s −1 A = 1 N m s −1 = 1 J s −1 = 1 W). VA rating is most useful in rating wires and switches (and other power handling equipment) for inductive loads.
- Volt-ampere reactive
- In electric power transmission and distribution, volt-ampere reactive (var) is a unit of measurement of reactive power. Reactive power exists in an AC circuit when the current and voltage are not in phase. The term var was proposed by the Romanian electrical engineer Constantin Budeanu and introduced in 1930 by the IEC in Stockholm, which has adopted it as the unit for reactive power. Special instruments called varmeters are available to measure the reactive power in a circuit.[262] The unit "var" is allowed by the International System of Units (SI) even though the unit var is representative of a form of power.[263] SI allows one to specify units to indicate common sense physical considerations. Per EU directive 80/181/EEC (the "metric directive"), the correct symbol is lower-case "var",[264] although the spellings "Var" and "VAr" are commonly seen, and "VAR" is widely used throughout the power industry.
- Volta potential
- The Volta potential (also called Volta potential difference, contact potential difference, outer potential difference, Δψ, or "delta psi") in electrochemistry, is the electrostatic potential difference between two metals (or one metal and one electrolyte) that are in contact and are in thermodynamic equilibrium. Specifically, it is the potential difference between a point close to the surface of the first metal, and a point close to the surface of the second metal (or electrolyte).[265]
- Voltage
- Voltage, electric potential difference, electric pressure or electric tension is the difference in electric potential between two points. The difference in electric potential between two points (i.e., voltage) is defined as the work needed per unit of charge against a static electric field to move a test charge between the two points. In the International System of Units, the derived unit for voltage is named volt.[266] In SI units, work per unit charge is expressed as joules per coulomb, where 1 volt = 1 joule (of work) per 1 coulomb (of charge). The official SI definition for volt uses power and current, where 1 volt = 1 watt (of power) per 1 ampere (of current).[266]
- Volumetric flow rate
- also known as volume flow rate, rate of fluid flow or volume velocity, is the volume of fluid which passes per unit time; usually represented by the symbol Q (sometimes V̇). The SI unit is m3/s (cubic metres per second).
- von Mises yield criterion
- The von Mises yield criterion (also known as the maximum distortion energy criterion[267]) suggests that yielding of a ductile material begins when the second deviatoric stress invariant reaches a critical value.[268] It is part of plasticity theory that applies best to ductile materials, such as some metals. Prior to yield, material response can be assumed to be of a nonlinear elastic, viscoelastic, or linear elastic behavior. In materials science and engineering the von Mises yield criterion can also be formulated in terms of the von Mises stress or equivalent tensile stress, . This is a scalar value of stress that can be computed from the Cauchy stress tensor. In this case, a material is said to start yielding when the von Mises stress reaches a value known as yield strength, . The von Mises stress is used to predict yielding of materials under complex loading from the results of uniaxial tensile tests. The von Mises stress satisfies the property where two stress states with equal distortion energy have an equal von Mises stress.
W
[edit]- Watt
- The SI unit of power, rate of doing work.
- Wave
- is a disturbance that transfers energy through matter or space, with little or no associated mass transport. Waves consist of oscillations or vibrations of a physical medium or a field, around relatively fixed locations. From the perspective of mathematics, waves, as functions of time and space, are a class of signals.[269]
- Wavelength
- is the spatial period of a periodic wave—the distance over which the wave's shape repeats.[270][271] It is thus the inverse of the spatial frequency. Wavelength is usually determined by considering the distance between consecutive corresponding points of the same phase, such as crests, troughs, or zero crossings and is a characteristic of both traveling waves and standing waves, as well as other spatial wave patterns.[272][273] Wavelength is commonly designated by the Greek letter lambda (λ). The term wavelength is also sometimes applied to modulated waves, and to the sinusoidal envelopes of modulated waves or waves formed by interference of several sinusoids.[274]' .
- Wedge
- is a triangular shaped tool, and is a portable inclined plane, and one of the six classical simple machines. It can be used to separate two objects or portions of an object, lift up an object, or hold an object in place. It functions by converting a force applied to its blunt end into forces perpendicular (normal) to its inclined surfaces. The mechanical advantage of a wedge is given by the ratio of the length of its slope to its width.[275][276] Although a short wedge with a wide angle may do a job faster, it requires more force than a long wedge with a narrow angle.
- Weighted arithmetic mean
- The weighted arithmetic mean is similar to an ordinary arithmetic mean (the most common type of average), except that instead of each of the data points contributing equally to the final average, some data points contribute more than others. The notion of weighted mean plays a role in descriptive statistics and also occurs in a more general form in several other areas of mathematics. If all the weights are equal, then the weighted mean is the same as the arithmetic mean. While weighted means generally behave in a similar fashion to arithmetic means, they do have a few counterintuitive properties, as captured for instance in Simpson's paradox.
- Wet-bulb temperature
- The temperature of a wetted thermometer with an air current across it. Used in psychrometry.
- Wheel and axle
- are one of six simple machines identified by Renaissance scientists drawing from Greek texts on technology.[277] The wheel and axle consists of a wheel attached to a smaller axle so that these two parts rotate together in which a force is transferred from one to the other. A hinge or bearing supports the axle, allowing rotation. It can amplify force; a small force applied to the periphery of the large wheel can move a larger load attached to the axle.
- Winsorized mean
- is a winsorized statistical measure of central tendency, much like the mean and median, and even more similar to the truncated mean. It involves the calculation of the mean after replacing given parts of a probability distribution or sample at the high and low end with the most extreme remaining values,[278] typically doing so for an equal amount of both extremes; often 10 to 25 percent of the ends are replaced. The winsorized mean can equivalently be expressed as a weighted average of the truncated mean and the quantiles at which it is limited, which corresponds to replacing parts with the corresponding quantiles.
- Work hardening
- also known as strain hardening, is the strengthening of a metal or polymer by plastic deformation. This strengthening occurs because of dislocation movements and dislocation generation within the crystal structure of the material.[194]
X-Z
[edit]
- X-axis
- in algebraic geometry, the axis on a graph that is usually drawn left to right and usually shows the range of values of an independent variable.[279]
- Y-axis
- in algebraic geometry, the axis on a graph that is usually drawn from bottom to top and usually shows the range of values of variable dependent on one other variable, or the second of two independent variables.[280]
- Yield
- The point of maximum elastic deformation of a material; above yield the material is permanently deformed.
- Young's modulus
- A measure of the stiffness of a material; the amount of force per unit area require to produce a unit strain.
- Z-axis
- In algebraic geometry, the axis on a graph of at least three dimensions that is usually drawn vertically and usually shows the range of values of a variable dependent on two other variables or the third independent variable.[281]
- Zero defects
- A quality assurance philosophy that aims to reduce the need for inspection of components by improving their quality.
- Zero force member
- In the field of engineering mechanics, a zero force member is a member (a single truss segment) in a truss which, given a specific load, is at rest: neither in tension, nor in compression. In a truss a zero force member is often found at pins (any connections within the truss) where no external load is applied and three or fewer truss members meet. Recognizing basic zero force members can be accomplished by analyzing the forces acting on an individual pin in a physical system.
Note: If the pin has an external force or moment applied to it, then all of the members attached to that pin are not zero force members unless the external force acts in a manner that fulfills one of the rules below:
- If two non-collinear members meet in an unloaded joint, both are zero-force members.
- If three members meet in an unloaded joint of which two are collinear, then the third member is a zero-force member.
- These members contribute to the stability of the structure, by providing buckling prevention for long slender members under compressive forces
- These members can carry loads in the event that variations are introduced in the normal external loading configuration.
- Zeroth law of thermodynamics
- The equivalence principle applied to temperature; two systems in thermal equilibrium with a third are also in thermal equilibrium with each other.
See also
[edit]- Engineering
- National Council of Examiners for Engineering and Surveying
- Fundamentals of Engineering Examination
- Principles and Practice of Engineering Examination
- Graduate Aptitude Test in Engineering
- Glossary of aerospace engineering
- Glossary of civil engineering
- Glossary of electrical and electronics engineering
- Glossary of mechanical engineering
- Glossary of structural engineering
- Glossary of architecture
- Glossary of areas of mathematics
- Glossary of artificial intelligence
- Glossary of astronomy
- Glossary of biology
- Glossary of calculus
- Glossary of chemistry
- Glossary of ecology
- Glossary of economics
- Glossary of physics
- Glossary of probability and statistics
- List of established military terms § Engineering
Notes
[edit]- ^ Electric and magnetic fields, according to the theory of relativity, are the components of a single electromagnetic field.
- ^ Pronounced "x bar".
- ^ Greek letter μ, for "mean", pronounced /'mjuː/.
- ^ Strictly speaking, a probability of 0 indicates that an event almost never takes place, whereas a probability of 1 indicates than an event almost certainly takes place. This is an important distinction when the sample space is infinite. For example, for the continuous uniform distribution on the real interval [5, 10], there are an infinite number of possible outcomes, and the probability of any given outcome being observed — for instance, exactly 7 — is 0. This means that when we make an observation, it will almost surely not be exactly 7. However, it does not mean that exactly 7 is impossible. Ultimately some specific outcome (with probability 0) will be observed, and one possibility for that specific outcome is exactly 7.
- ^ The photon's invariant mass (also called "rest mass" for massive particles) is believed to be exactly zero. This is the notion of particle mass generally used by modern physicists. The photon does have a nonzero relativistic mass, depending on its energy, but this varies according to the frame of reference.
- ^ At the start of The Feynman Lectures on Physics, Richard Feynman offers the atomic hypothesis as the single most prolific scientific concept.[114]
- ^ The term "universe" is defined as everything that physically exists: the entirety of space and time, all forms of matter, energy and momentum, and the physical laws and constants that govern them. However, the term "universe" may also be used in slightly different contextual senses, denoting concepts such as the cosmos or the philosophical world.
- ^ The preferred spelling varies by country and even by industry. Further, both spellings are often used within a particular industry or country. Industries in British English-speaking countries typically use the "gauge" spelling.
- ^ For example, the SI unit of velocity is the metre per second, m⋅s−1; of acceleration is the metre per second squared, m⋅s−2; etc.
- ^ For example the newton (N), the unit of force, equivalent to kg⋅m⋅s−2; the joule (J), the unit of energy, equivalent to kg⋅m2⋅s−2, etc. The most recently named derived unit, the katal, was defined in 1999.
- ^ For example, the recommended unit for the electric field strength is the volt per metre, V/m, where the volt is the derived unit for electric potential difference. The volt per metre is equal to kg⋅m⋅s−3⋅A−1 when expressed in terms of base units.
References
[edit]- ^ Robert L. Norton, Machine Design, (4th Edition), Prentice-Hall, 2010
- ^ Matthews, Clifford; American Society of Mechanical Engineers (2005), ASME engineer's data book (2nd ed.), ASME Press, p. 249, ISBN 978-0-7918-0229-8.
- ^ Bhandari, V. B. (2007), Design of machine elements (2nd ed.), Tata McGraw-Hill, p. 10, ISBN 978-0-07-061141-2.
- ^ Mitchell, Tom (1997). Machine Learning. New York: McGraw Hill. ISBN 0-07-042807-7. OCLC 36417892.
- ^ The definition "without being explicitly programmed" is often attributed to Arthur Samuel, who coined the term "machine learning" in 1959, but the phrase is not found verbatim in this publication, and may be a paraphrase that appeared later. Confer "Paraphrasing Arthur Samuel (1959), the question is: How can computers learn to solve problems without being explicitly programmed?" in Koza, John R.; Bennett, Forrest H.; Andre, David; Keane, Martin A. (1996). Automated Design of Both the Topology and Sizing of Analog Electrical Circuits Using Genetic Programming. Artificial Intelligence in Design '96. Springer, Dordrecht. pp. 151–170. doi:10.1007/978-94-009-0279-4_9.
- ^ Hu, J.; Niu, H.; Carrasco, J.; Lennox, B.; Arvin, F., "Voronoi-Based Multi-Robot Autonomous Exploration in Unknown Environments via Deep Reinforcement Learning" IEEE Transactions on Vehicular Technology, 2020.
- ^ Feynman, Richard P.; Leighton, Robert B.; Sands, Matthew (1963). The Feynman Lectures on Physics. Vol. 2. California Institute of Technology. ISBN 9780465040858.
- ^ Young, Hugh D.; Freedman, Roger A.; Ford, A. Lewis (2008). Sears and Zemansky's university physics : with modern physics. Vol. 2. Pearson Addison-Wesley. pp. 918–919. ISBN 9780321501219.
- ^ Purcell, Edward. p278. Electricity and Magnetism, 3rd edition, Cambridge University Press, 2013. 839pp.
- ^ The International System of Units (PDF) (9th ed.), International Bureau of Weights and Measures, Dec 2022, ISBN 978-92-822-2272-0, p. 22
- ^ The International System of Units (PDF) (9th ed.), International Bureau of Weights and Measures, Dec 2022, ISBN 978-92-822-2272-0, p. 21
- ^ Matisoff, Bernard S. (1986). "Manufacturing Engineering: Definition and Purpose". Handbook of Electronics Manufacturing Engineering. pp. 1–4. doi:10.1007/978-94-011-7038-3_1. ISBN 978-94-011-7040-6.
- ^ Himmelblau, David M. (1967). Basic Principles and Calculations in Chemical Engineering (2nd ed.). Prentice Hall.
- ^ The National Aeronautic and Atmospheric Administration's Glenn Research Center. "Gas Density Glenn research Center". grc.nasa.gov. Archived from the original on April 14, 2013. Retrieved April 9, 2013.
- ^ "Density definition in Oil Gas Glossary". Oilgasglossary.com. Archived from the original on August 5, 2010. Retrieved September 14, 2010.
- ^ Jensen, William B. (2005). The Origins of the Symbols A and Z for Atomic Weight and Number. J. Chem. Educ. 82: 1764. link Archived 2020-12-02 at the Wayback Machine.
- ^ "How many protons, electrons and neutrons are in an atom of krypton, carbon, oxygen, neon, silver, gold, etc...?". Thomas Jefferson National Accelerator Facility. Retrieved 2008-08-27.
- ^ "Elemental Notation and Isotopes". Science Help Online. Archived from the original on 2008-09-13. Retrieved 2008-08-27.
- ^ Eddy, Matthew Daniel (2008). The Language of Mineralogy: John Walker, Chemistry and the Edinburgh Medical School 1750–1800. Ashgate. Archived from the original on 2015-09-03.
- ^ Smith, Cyril Stanley (1981). A Search for Structure. MIT Press. ISBN 978-0262191913.
- ^ "The Nature of Mathematical Programming Archived 2014-03-05 at the Wayback Machine," Mathematical Programming Glossary, INFORMS Computing Society.
- ^ Du, D. Z.; Pardalos, P. M.; Wu, W. (2008). "History of Optimization". In Floudas, C.; Pardalos, P. (eds.). Encyclopedia of Optimization. Boston: Springer. pp. 1538–1542.
- ^ Definition from the Journal of Mathematical Physics. "Archived copy". Archived from the original on 2006-10-03. Retrieved 2006-10-03.
{{cite web}}
: CS1 maint: archived copy as title (link) - ^ a b "mathematics, n.". Oxford English Dictionary. Oxford University Press. 2012. Archived from the original on November 16, 2019. Retrieved June 16, 2012.
The science of space, number, quantity, and arrangement, whose methods involve logical reasoning and usually the use of symbolic notation, and which includes geometry, arithmetic, algebra, and analysis.
- ^ Kneebone, G.T. (1963). Mathematical Logic and the Foundations of Mathematics: An Introductory Survey. Dover. p. 4. ISBN 978-0-486-41712-7.
Mathematics ... is simply the study of abstract structures, or formal patterns of connectedness.
- ^ LaTorre, Donald R.; Kenelly, John W.; Biggers, Sherry S.; Carpenter, Laurel R.; Reed, Iris B.; Harris, Cynthia R. (2011). Calculus Concepts: An Informal Approach to the Mathematics of Change. Cengage Learning. p. 2. ISBN 978-1-4390-4957-0.
Calculus is the study of change—how things change, and how quickly they change.
- ^ Ramana (2007). Applied Mathematics. Tata McGraw–Hill Education. p. 2.10. ISBN 978-0-07-066753-2.
The mathematical study of change, motion, growth or decay is calculus.
- ^ Ziegler, Günter M. (2011). "What Is Mathematics?". An Invitation to Mathematics: From Competitions to Research. Springer. p. vii. ISBN 978-3-642-19532-7.
- ^ Mura, Roberta (Dec 1993). "Images of Mathematics Held by University Teachers of Mathematical Sciences". Educational Studies in Mathematics. 25 (4): 375–85. doi:10.1007/BF01273907. JSTOR 3482762. S2CID 122351146.
- ^ Tobies, Renate & Helmut Neunzert (2012). Iris Runge: A Life at the Crossroads of Mathematics, Science, and Industry. Springer. p. 9. ISBN 978-3-0348-0229-1.
[I]t is first necessary to ask what is meant by mathematics in general. Illustrious scholars have debated this matter until they were blue in the face, and yet no consensus has been reached about whether mathematics is a natural science, a branch of the humanities, or an art form.
- ^ Steen, L.A. (April 29, 1988). The Science of Patterns Science, 240: 611–16. And summarized at Association for Supervision and Curriculum Development Archived October 28, 2010, at the Wayback Machine, www.ascd.org.
- ^ Devlin, Keith, Mathematics: The Science of Patterns: The Search for Order in Life, Mind and the Universe (Scientific American Paperback Library) 1996, ISBN 978-0-7167-5047-5
- ^ However, in the case of adjacency matrices, matrix multiplication or a variant of it allows the simultaneous computation of the number of paths between any two vertices, and of the shortest length of a path between two vertices.
- ^ a b R. Penrose (1991). "The mass of the classical vacuum". In S. Saunders; H.R. Brown (eds.). The Philosophy of Vacuum. Oxford University Press. pp. 21–26. ISBN 978-0-19-824449-3.
- ^ "Matter (physics)". McGraw-Hill's Access Science: Encyclopedia of Science and Technology Online. Archived from the original on 17 June 2011. Retrieved 2009-05-24.
- ^ "RHIC Scientists Serve Up "Perfect" Liquid" (Press release). Brookhaven National Laboratory. 18 April 2005. Retrieved 2009-09-15.
- ^ Underhill, L.G.; Bradfield d. (1998) Introstat, Juta and Company Ltd. ISBN 0-7021-3838-X p. 181
- ^ Feller, William (1950). Introduction to Probability Theory and its Applications, Vol I. Wiley. p. 221. ISBN 0471257087.
- ^ Elementary Statistics by Robert R. Johnson and Patricia J. Kuby, p. 279
- ^ Weisstein, Eric W. "Population Mean". mathworld.wolfram.com. Retrieved 2020-08-21.
- ^ Schaum's Outline of Theory and Problems of Probability by Seymour Lipschutz and Marc Lipson, p. 141
- ^ Weisberg H.F (1992) Central Tendency and Variability, Sage University Paper Series on Quantitative Applications in the Social Sciences, ISBN 0-8039-4007-6 p.2
- ^ a b Upton, G.; Cook, I. (2008) Oxford Dictionary of Statistics, OUP ISBN 978-0-19-954145-4 (entry for "central tendency")
- ^ Dodge, Y. (2003) The Oxford Dictionary of Statistical Terms, OUP for International Statistical Institute. ISBN 0-19-920613-9 (entry for "central tendency")
- ^ Uicker, John J.; Pennock, G. R.; Shigley, J. E. (2011). Theory of machines and mechanisms. New York: Oxford University Press. ISBN 978-0-19-537123-9.
- ^ "What is Mechanical Engineering?". 28 December 2018.
- ^ Giancoli, D. C. (2009) Physics for scientists & engineers with modern physics (4th ed.). Upper Saddle River, N.J.: Pearson Prentice Hall.
- ^ Young, Hugh D. (Hugh David), 1930- (2 September 2019). Sears and Zemansky's university physics : with modern physics. Freedman, Roger A., Ford, A. Lewis (Albert Lewis), Estrugo, Katarzyna Zulteta (Fifteenth edition in SI units ed.). Harlow. p. 62. ISBN 978-1-292-31473-0. OCLC 1104689918.
{{cite book}}
: CS1 maint: location missing publisher (link) CS1 maint: multiple names: authors list (link) CS1 maint: numeric names: authors list (link) - ^ Dugas, Rene. A History of Classical Mechanics. New York, NY: Dover Publications Inc, 1988, pg 19.
- ^ Rana, N.C., and Joag, P.S. Classical Mechanics. West Petal Nagar, New Delhi. Tata McGraw-Hill, 1991, pg 6.
- ^ a b Renn, J., Damerow, P., and McLaughlin, P. Aristotle, Archimedes, Euclid, and the Origin of Mechanics: The Perspective of Historical Epistemology. Berlin: Max Planck Institute for the History of Science, 2010, pg 1-2.
- ^ Ramsay, J. A. (1 May 1949). "A New Method of Freezing-Point Determination for Small Quantities". Journal of Experimental Biology. 26 (1): 57–64. doi:10.1242/jeb.26.1.57. PMID 15406812.
- ^ D. Griffiths (2008)
- ^ Metallic bonding. chemguide.co.uk
- ^ Metal structures. chemguide.co.uk
- ^ Chemical Bonds. chemguide.co.uk
- ^ "Physics 133 Lecture Notes" Spring, 2004. Marion Campus. physics.ohio-state.edu
- ^ John, Blyler (27 December 2019). "What is middle-out systems engineering?". DesignNews. Retrieved 28 September 2020.
- ^ Dodge 2003.
- ^ Tukey, J. W. (1977) Exploratory Data Analysis, Addison-Wesley. ISBN 0-201-07616-0
- ^ Ashcroft, Neil W.; Mermin, N. David (1976). Solid state physics. New York: Holt, Rinehart and Winston. ISBN 0030839939. OCLC 934604.
- ^ Hu, J.; Bhowmick, P.; Lanzon, A., "Group Coordinated Control of Networked Mobile Robots with Applications to Object Transportation" IEEE Transactions on Vehicular Technology, 2021.
- ^ "Information Engineering Main/Home Page". www.robots.ox.ac.uk. Retrieved 2018-10-03.
- ^ Hu, J.; Bhowmick, P.; Jang, I.; Arvin, F.; Lanzon, A., "A Decentralized Cluster Formation Containment Framework for Multirobot Systems" IEEE Transactions on Robotics, 2021.
- ^ Hu, J.; Turgut, A.; Lennox, B.; Arvin, F., "Robust Formation Coordination of Robot Swarms with Nonlinear Dynamics and Unknown Disturbances: Design and Experiments" IEEE Transactions on Circuits and Systems II: Express Briefs, 2021.
- ^ Damodar N. Gujarati. Essentials of Econometrics. McGraw-Hill Irwin. 3rd edition, 2006: p. 110.
- ^ Askeland, Donald R.; Phulé, Pradeep P. (2006). The science and engineering of materials (5th ed.). Cengage Learning. p. 198. ISBN 978-0-534-55396-8.
- ^ Beer, Ferdinand P.; Johnston, E. Russell; Dewolf, John; Mazurek, David (2009). Mechanics of Materials. McGraw Hill. p. 56. ISBN 978-0-07-015389-9.
- ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "Extinction". doi:10.1351/goldbook.E02293
- ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "Absorptivity". doi:10.1351/goldbook.A00044
- ^ "Typography of unit symbols for Molar and Liter in siunitx". TeX - LaTeX Stack Exchange.
- ^ International Union of Pure and Applied Chemistry (1993). Quantities, Units and Symbols in Physical Chemistry, 2nd edition, Oxford: Blackwell Science. ISBN 0-632-03583-8. p. 41. Electronic version.
- ^ "Molding – Definition of molding by Merriam-Webster". merriam-webster.com. 26 June 2023.
- ^ IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (2006–) "Molecule". doi:10.1351/goldbook.M04002
- ^ Ebbin, Darrell D. (1990). General Chemistry (3rd ed.). Boston: Houghton Mifflin Co. ISBN 978-0-395-43302-7.
- ^ Brown, T.L.; Kenneth C. Kemp; Theodore L. Brown; Harold Eugene LeMay; Bruce Edward Bursten (2003). Chemistry – the Central Science (9th ed.). New Jersey: Prentice Hall. ISBN 978-0-13-066997-1.
- ^ Chang, Raymond (1998). Chemistry (6th ed.). New York: McGraw Hill. ISBN 978-0-07-115221-1.
- ^ Zumdahl, Steven S. (1997). Chemistry (4th ed.). Boston: Houghton Mifflin. ISBN 978-0-669-41794-4.
- ^ Chandra, Sulekh (2005). Comprehensive Inorganic Chemistry. New Age Publishers. ISBN 978-81-224-1512-4.
- ^ "Molecule". Encyclopædia Britannica. 22 January 2016. Retrieved 23 February 2016.
- ^ "Molecular Physics". Archived from the original on 2019-11-16. Retrieved 2021-09-13.
- ^ Close, Frank (2010). Neutrinos (softcover ed.). Oxford University Press. ISBN 978-0-199-69599-7.
- ^ a b Jayawardhana, Ray (2015). The Neutrino Hunters: The chase for the ghost particle and the secrets of the universe (softcover ed.). Oneworld Publications. ISBN 978-1-780-74647-0.
- ^ Mertens, Susanne (2016). "Direct neutrino mass experiments". Journal of Physics: Conference Series. 718 (2): 022013. arXiv:1605.01579. Bibcode:2016JPhCS.718b2013M. doi:10.1088/1742-6596/718/2/022013. S2CID 56355240.
- ^ Overbye, Dennis (15 April 2020). "Why The Big Bang Produced Something Rather Than Nothing - How did matter gain the edge over antimatter in the early universe? Maybe, just maybe, neutrinos". The New York Times. Retrieved 16 April 2020.
- ^ Close, Frank (2010). Neutrinos (softcover ed.). Oxford University Press. ISBN 978-0-199-69599-7.
- ^ Panton, Ronald L. (2013). Incompressible Flow (Fourth ed.). Hoboken: John Wiley & Sons. p. 114. ISBN 978-1-118-01343-4.
- ^ Batchelor, G. K. (2000) [1967]. An Introduction to Fluid Dynamics. Cambridge Mathematical Library series, Cambridge University Press. ISBN 978-0-521-66396-0.
- ^ Kundu, P.; Cohen, I. Fluid Mechanics. p. (page needed).
- ^ Kirby, B. J. (2010). Micro- and Nanoscale Fluid Mechanics: Transport in Microfluidic Devices. Cambridge University Press. ISBN 978-0-521-11903-0. Archived from the original on 2019-04-28. Retrieved 2021-10-02.
- ^ Vijaya, A.V.; Rodriguez, Dora, Figuring Out Mathematics, Pearson Education India, pp. 20–21, ISBN 9788131703571.
- ^ Miessler, G. L. and Tarr, D. A. (2010) Inorganic Chemistry 3rd ed., Pearson/Prentice Hall publisher, ISBN 0-13-035471-6.
- ^ britannica.com
- ^ Livingston, M. S.; Blewett, J. (1969). Particle Accelerators. New York: McGraw-Hill. ISBN 978-1-114-44384-6.
- ^ Gardner, Julian W.; Varadan, Vijay K.; Awadelkarim, Osama O. (2001). Microsensors, MEMS, and Smart Devices John 2. Wiley. pp. 23–322. ISBN 978-0-471-86109-6.
- ^ Arthur Schuster (1904). An Introduction to the Theory of Optics. London: Edward Arnold.
An Introduction to the Theory of Optics By Arthur Schuster.
- ^ "The Higgs Boson". CERN. 26 May 2023.
- ^ "The BEH-Mechanism, Interactions with Short Range Forces and Scalar Particles" (PDF). 8 October 2013.
- ^ "Pascal's principle - Definition, Example, & Facts". britannica.com. Archived from the original on 2 June 2015. Retrieved 9 May 2018.
- ^ "Pascal's Principle and Hydraulics". www.grc.nasa.gov. Archived from the original on 5 April 2018. Retrieved 9 May 2018.
- ^ "Pressure". hyperphysics.phy-astr.gsu.edu. Archived from the original on 28 October 2017. Retrieved 9 May 2018.
- ^ Bloomfield, Louis (2006). How Things Work: The Physics of Everyday Life (Third ed.). John Wiley & Sons. p. 153. ISBN 978-0-471-46886-8.
- ^ Acott, Chris (1999). "The diving "Law-ers": A brief resume of their lives". South Pacific Underwater Medicine Society Journal. 29 (1). ISSN 0813-1988. OCLC 16986801. Archived from the original on 2011-04-02. Retrieved 2011-06-14.
{{cite journal}}
: CS1 maint: unfit URL (link). - ^ O'Connor, J.J.; Robertson, E.F. (August 2006). "Étienne Pascal". University of St. Andrews, Scotland. Archived from the original on 19 April 2010. Retrieved 5 February 2010.
- ^ "Pendulum". Miriam Webster's Collegiate Encyclopedia. Miriam Webster. 2000. p. 1241. ISBN 978-0-87779-017-4.
- ^ "Petroleum Engineers: Occupational Outlook Handbook: U.S. Bureau of Labor Statistics". www.bls.gov. Retrieved 2018-02-06.
- ^ Modell, Michael; Robert C. Reid (1974). Thermodynamics and Its Applications. Englewood Cliffs, NJ: Prentice-Hall. ISBN 978-0-13-914861-3.
- ^ Enrico Fermi (25 April 2012). Thermodynamics. Courier Corporation. ISBN 978-0-486-13485-7.
- ^ Clement John Adkins (14 July 1983). Equilibrium Thermodynamics. Cambridge University Press. ISBN 978-0-521-27456-2.
- ^ Ballou, Glen (2005). Handbook for sound engineers (3 ed.). Focal Press, Gulf Professional Publishing. p. 1499. ISBN 978-0-240-80758-4.
- ^ Smith, Joe Mauk (2018). Introduction to chemical engineering thermodynamics. United States of America: McGraw-Hill Education. p. 422. ISBN 978-1-259-69652-7.
- ^ Atkins, Peter; Paula, Julio De; Keeler, James (2018). Atkins' Physical chemistry (Eleventh ed.). Oxford University Press. pp. 123–125. ISBN 9780198769866.
- ^ Gibbs, J. W. (1961), Scientific Papers, Dover, New York
{{citation}}
: CS1 maint: location missing publisher (link) - ^ Feynman, Leighton & Sands 1963, p. I-2 "If, in some cataclysm, all [] scientific knowledge were to be destroyed [save] one sentence [...] what statement would contain the most information in the fewest words? I believe it is [...] that all things are made up of atoms – little particles that move around in perpetual motion, attracting each other when they are a little distance apart, but repelling upon being squeezed into one another ..."
- ^ Maxwell 1878, p. 9 "Physical science is that department of knowledge which relates to the order of nature, or, in other words, to the regular succession of events."
- ^ Young & Freedman 2014, p. 1 "Physics is one of the most fundamental of the sciences. Scientists of all disciplines use the ideas of physics, including chemists who study the structure of molecules, paleontologists who try to reconstruct how dinosaurs walked, and climatologists who study how human activities affect the atmosphere and oceans. Physics is also the foundation of all engineering and technology. No engineer could design a flat-screen TV, an interplanetary spacecraft, or even a better mousetrap without first understanding the basic laws of physics. (...) You will come to see physics as a towering achievement of the human intellect in its quest to understand our world and ourselves."
- ^ Young & Freedman 2014, p. 2 "Physics is an experimental science. Physicists observe the phenomena of nature and try to find patterns that relate these phenomena."
- ^ Holzner 2006, p. 7 "Physics is the study of your world and the world and universe around you."
- ^ The International System of Units (PDF) (9th ed.), International Bureau of Weights and Measures, Dec 2022, p. 131, ISBN 978-92-822-2272-0
- ^ "2022 CODATA Value: Planck constant". The NIST Reference on Constants, Units, and Uncertainty. NIST. May 2024. Retrieved 2024-05-18.
- ^ "Resolutions of the 26th CGPM" (PDF). BIPM. 2018-11-16. Archived from the original (PDF) on 2018-11-19. Retrieved 2018-11-20.
- ^ Goldston, R.J.; Rutherford, P.H. (1995). Introduction to Plasma Physics. Taylor & Francis. p. 1−2. ISBN 978-0-7503-0183-1.
- ^ Morozov, A.I. (2012). Introduction to Plasma Dynamics. CRC Press. p. 17. ISBN 978-1-4398-8132-3.
- ^ Lubliner, J. (2008). Plasticity theory. Dover. ISBN 978-0-486-46290-5.
- ^ Bigoni, D. (2012). Nonlinear Solid Mechanics: Bifurcation Theory and Material Instability. Cambridge University Press. ISBN 978-1-107-02541-7.
- ^ Smith, Clare (2001). Environmental Physics. London: Routledge. ISBN 0-415-20191-8.
- ^ Fowle, Frederick E., ed. (1921). Smithsonian Physical Tables (7th revised ed.). Washington, D.C.: Smithsonian Institution. OCLC 1142734534. Archived from the original on 23 April 2020.
Power or Activity is the time rate of doing work, or if W represents work and P power, P = dw/dt. (p. xxviii) ... ACTIVITY. Power or rate of doing work; unit, the watt. (p. 435)
- ^ Heron, C. A. (1906). "Electrical Calculations for Rallway Motors". Purdue Eng. Rev. (2): 77–93. Archived from the original on 23 April 2020. Retrieved 23 April 2020.
The activity of a motor is the work done per second, ... Where the joule is employed as the unit of work, the international unit of activity is the joule-per-second, or, as it is commonly called, the watt. (p. 78)
- ^ "Societies and Academies". Nature. 66 (1700): 118–120. 1902. Bibcode:1902Natur..66R.118.. doi:10.1038/066118b0.
If the watt is assumed as unit of activity...
- ^ Knight, Randall D. (2007). "Fluid Mechanics". Physics for Scientists and Engineers: A Strategic Approach (google books) (2nd ed.). San Francisco: Pearson Addison Wesley. p. 1183. ISBN 978-0-321-51671-8. Retrieved 6 April 2020.
Pressure itself is not a Force, even though we sometimes talk "informally" about the "force exerted by the pressure. The correct statement is that the Fluid exerts a force on a surface. In addition, Pressure is a scalar, not a vector.
- ^ "Kendall's Advanced Theory of Statistics, Volume 1: Distribution Theory", Alan Stuart and Keith Ord, 6th Ed, (2009), ISBN 978-0-534-24312-8.
- ^ William Feller, An Introduction to Probability Theory and Its Applications, (Vol 1), 3rd Ed, (1968), Wiley, ISBN 0-471-25708-7.
- ^ Everitt, Brian. (2006). The Cambridge dictionary of statistics (3rd ed.). Cambridge, UK: Cambridge University Press. ISBN 978-0-511-24688-3. OCLC 161828328.
- ^ Ash, Robert B. (2008). Basic probability theory (Dover ed.). Mineola, N.Y.: Dover Publications. pp. 66–69. ISBN 978-0-486-46628-6. OCLC 190785258.
- ^ Ross, Sheldon M. (2010). A first course in probability. Pearson.
- ^ Inferring From Data
- ^ "Why is quantum mechanics based on probability theory?". Stack Exchange. July 1, 2014.
- ^ Pump classifications. Fao.org. Retrieved on 2011-05-25.
- ^ Peskin, M.; Schroeder, D. (1995). An Introduction to Quantum Field Theory. Westview Press. ISBN 978-0-201-50397-5.
- ^ Feynman, Richard; Leighton, Robert; Sands, Matthew (1964). The Feynman Lectures on Physics, Vol. 3. California Institute of Technology. ISBN 978-0201500646. Retrieved 2020-12-19.
- ^ Dana, Edward Salisbury (1922). A text-book of mineralogy: with an extended treatise on crystallography... New York, London(Chapman Hall): John Wiley and Sons. pp. 195–200, 316.
- ^ Schetz, Joseph A.; Allen E. Fuhs (1999-02-05). Fundamentals of fluid mechanics. Wiley, John & Sons, Incorporated. pp. 111, 142, 144, 147, 109, 155, 157, 160, 175. ISBN 0-471-34856-2.
- ^ Institute of Electrical and Electronics Engineers (1990) IEEE Standard Computer Dictionary: A Compilation of IEEE Standard Computer Glossaries. New York, NY ISBN 1-55937-079-3
- ^ Lowrie, William (2007). Fundamentals of Geophysics. Cambridge University Press. pp. 254–55. ISBN 978-05-2185-902-8. Retrieved March 24, 2019.
- ^ Kumar, Narinder (2003). Comprehensive Physics for Class XII. New Delhi: Laxmi Publications. pp. 280–84. ISBN 978-81-7008-592-8. Retrieved March 24, 2019.
- ^ Bogatin, Eric (2004). Signal Integrity: Simplified. Prentice Hall Professional. p. 114. ISBN 978-0-13-066946-9. Retrieved March 24, 2019.
- ^ W. R. Schowalter (1978) Mechanics of Non-Newtonian Fluids Pergamon ISBN 0-08-021778-8
- ^ Andy Ruina and Rudra Pratap (2015). Introduction to Statics and Dynamics. Oxford University Press. (link: [1])
- ^ "German National Library". International classification system of the German National Library (GND).
- ^ a b "Root-mean-square value". A Dictionary of Physics (6 ed.). Oxford University Press. 2009. ISBN 9780199233991.
- ^ Thompson, Sylvanus P. (1965). Calculus Made Easy. Macmillan International Higher Education. p. 185. ISBN 9781349004874. Retrieved 5 July 2020.[permanent dead link]
- ^ Jones, Alan R. (2018). Probability, Statistics and Other Frightening Stuff. Routledge. p. 48. ISBN 9781351661386. Retrieved 5 July 2020.
- ^ Atkins, Tony; Escudier, Marcel (2013). A Dictionary of Mechanical Engineering. Oxford University Press. ISBN 9780199587438.
- ^ "Rotational Quantities".
- ^ "Safe Failure Fraction". ScienceDirect. Retrieved 21 September 2020.
- ^ "Transport - Transport - UNECE". Unece.org. Retrieved 22 December 2017.
- ^ Mosby's Medical, Nursing & Allied Health Dictionary, Fourth Edition, Mosby-Year Book Inc., 1994, p. 1394
- ^ Lay, David C. (2006). Linear Algebra and Its Applications (3rd ed.). Addison–Wesley. ISBN 0-321-28713-4.
- ^ Strang, Gilbert (2006). Linear Algebra and Its Applications (4th ed.). Brooks Cole. ISBN 0-03-010567-6.
- ^ Axler, Sheldon (2002). Linear Algebra Done Right (2nd ed.). Springer. ISBN 0-387-98258-2.
- ^ Dummit, David S.; Foote, Richard M. (2004). Abstract Algebra (3rd ed.). John Wiley & Sons. ISBN 0-471-43334-9.
- ^ Lang, Serge (2002). Algebra. Graduate Texts in Mathematics. Springer. ISBN 0-387-95385-X.
- ^ a b Young, James F. (2000). "Basic Mechanics". ELEC 201:Introduction to Engineering Design. Electrical and Computer Engineering Dept., Rice Univ. Retrieved 2011-03-29.
- ^ Morris, William, Ed. (1979). The American Heritage Dictionary, New College Edition. USA: Houghton Mifflin. pp. 1167. ISBN 0-395-20360-0.
{{cite book}}
: CS1 maint: multiple names: authors list (link) - ^ "Screw". How Stuff Works website. Discovery Communications. 2011. Retrieved 2011-03-29.
- ^ Collins, Jack A.; Henry R. Busby; George H. Staab (2009). Mechanical Design of Machine Elements and Machines, 2nd Ed. USA: John Wiley and Sons. pp. 462–463. ISBN 978-0-470-41303-6.
- ^ Bhandari, V. B. (2007). Design of machine elements. New Delhi: Tata McGraw-Hill. pp. 202–206. ISBN 978-0-07-061141-2.
- ^ "Signs of dark matter may point to mirror matter candidate".
- ^ Higdon, Ohlsen, Stiles and Weese (1960), Mechanics of Materials, article 4-9 (2nd edition), John Wiley & Sons, Inc., New York. Library of Congress CCN 66-25222
- ^ However, the definition of thermal infrared may start at wavelengths as short as 1.1μm (longer than which optical instruments have difficulty measuring) or anywhere between 2.0μm and 4.0μm, depending on the method of measurement and its purpose.
- ^ L. Chen, G. Yan, T. Wang, H. Ren, J. Calbó, J. Zhao, R. McKenzie (2012), Estimation of surface shortwave radiation components under all sky conditions: Modeling and sensitivity analysis, Remote Sensing of Environment, 123: 457–469.
- ^ Sengupta, Nandini; Sahidullah, Md; Saha, Goutam (August 2016). "Lung sound classification using cepstral-based statistical features". Computers in Biology and Medicine. 75 (1): 118–129. doi:10.1016/j.compbiomed.2016.05.013. PMID 27286184.
- ^ Alan V. Oppenheim and Ronald W. Schafer (1989). Discrete-Time Signal Processing. Prentice Hall. p. 1. ISBN 0-13-216771-9.
- ^ Paul, Akshoy; Roy, Pijush; Mukherjee, Sanchayan (2005), Mechanical sciences: engineering mechanics and strength of materials, Prentice Hall of India, p. 215, ISBN 978-81-203-2611-8.
- ^ Asimov, Isaac (1988), Understanding Physics, New York: Barnes & Noble, p. 88, ISBN 978-0-88029-251-1.
- ^ Anderson, William Ballantyne (1914). Physics for Technical Students: Mechanics and Heat. New York: McGraw Hill. p. 112. Retrieved 2008-05-11.
- ^ "Mechanics". Encyclopædia Britannica. Vol. 3. John Donaldson. 1773. p. 44. Retrieved 5 April 2020.
- ^ Morris, Christopher G. (1992). Academic Press Dictionary of Science and Technology. Gulf Professional Publishing. p. 1993. ISBN 9780122004001.
- ^ Albert Einstein (1905) "Zur Elektrodynamik bewegter Körper", Annalen der Physik 17: 891; English translation On the Electrodynamics of Moving Bodies by George Barker Jeffery and Wilfrid Perrett (1923); Another English translation On the Electrodynamics of Moving Bodies by Megh Nad Saha (1920).
- ^ Griffiths, David J. (2013). "Electrodynamics and Relativity". Introduction to Electrodynamics (4th ed.). Pearson. Chapter 12. ISBN 978-0-321-85656-2.
- ^ Jackson, John D. (1999). "Special Theory of Relativity". Classical Electrodynamics (3rd ed.). John Wiley & Sons, Inc. Chapter 11. ISBN 0-471-30932-X.
- ^ Babrauskas, Vytenis (2003). Ignition Handbook. Society of Fire Protection Engineerslocation=Boston p.369. ISBN 978-0-9728111-3-2.
- ^ Clancy, L.J., Aerodynamics, Section 3.5
- ^ Stagnation Pressure at Eric Weisstein's World of Physics (Wolfram Research)
- ^ "Statistics". Oxford Reference. Oxford University Press. January 2008. ISBN 978-0-19-954145-4.
- ^ Romijn, Jan-Willem (2014). "Philosophy of statistics". Stanford Encyclopedia of Philosophy.
- ^ "Cambridge Dictionary".
- ^ Dodge, Y. (2006) The Oxford Dictionary of Statistical Terms, Oxford University Press. ISBN 0-19-920613-9
- ^ Chegg Study chegg.com Archived 2021-08-25 at the Wayback Machine Retrieved August 2021
- ^ Bohren, Craig F.; Huffman, Donald R. (1998). Absorption and scattering of light by small particles. Wiley. pp. 123–126. ISBN 978-0-471-29340-8.
- ^ Narimanov, Evgenii E.; Smolyaninov, Igor I. (2012). "Beyond Stefan–Boltzmann Law: Thermal Hyper-Conductivity". Conference on Lasers and Electro-Optics 2012. OSA Technical Digest. Optical Society of America. pp. QM2E.1. CiteSeerX 10.1.1.764.846. doi:10.1364/QELS.2012.QM2E.1. ISBN 978-1-55752-943-5. S2CID 36550833.
- ^ Baumgart F. (2000). "Stiffness--an unknown world of mechanical science?". Injury. 31. Elsevier: 14–84. doi:10.1016/S0020-1383(00)80040-6. PMID 10853758.
Stiffness" = "Load" divided by "Deformation
- ^ Martin Wenham (2001), "Stiffness and flexibility", 200 science investigations for young students, SAGE Publications, p. 126, ISBN 978-0-7619-6349-3
- ^ a b Degarmo, Black & Kohser 2003, p. 60.
- ^ Van Melick, H. G. H.; Govaert, L. E.; Meijer, H. E. H. (2003), "On the origin of strain hardening in glassy polymers", Polymer, 44 (8): 2493–2502, doi:10.1016/s0032-3861(03)00112-5
- ^ Swenson, C. A. (1955), "Properties of Indium and Thallium at low temperatures", Physical Review, 100 (6): 1607–1614, Bibcode:1955PhRv..100.1607S, doi:10.1103/physrev.100.1607
- ^ Smith & Hashemi 2006, p. 246.
- ^ "Science Direct: Structural Analysis" Archived 2021-05-16 at the Wayback Machine
- ^ ASCE/SEI 7-05 Minimum Design Loads for Buildings and Other Structures. American Society of Civil Engineers. 2006. p. 1. ISBN 0-7844-0809-2.
- ^ "1.5.3.1". Eurocode 0: Basis of structural design EN 1990. Bruxelles: European Committee for Standardization. 2002.
- ^ Avallone, E.A.; Baumeister, T., eds. (1996). Mark's Standard Handbook for Mechanical Engineers (10th ed.). McGraw-Hill. pp. 11–42. ISBN 0-07-004997-1.
- ^ "Sublimate". Merriam-Webster.com Dictionary. Merriam-Webster.
- ^ Whitten, Kenneth W.; Gailey, Kenneth D.; Davis, Raymond E. (1992). General chemistry (4th ed.). Saunders College Publishing. p. 475. ISBN 0-03-072373-6.
- ^ Boreyko, Jonathan B.; Hansen, Ryan R.; Murphy, Kevin R.; Nath, Saurabh; Retterer, Scott T.; Collier, C. Patrick (2016). "Controlling condensation and frost growth with chemical micropatterns". Scientific Reports. 6: 19131. Bibcode:2016NatSR...619131B. doi:10.1038/srep19131. PMC 4726256. PMID 26796663.
- ^ "Sublime". Dictionary.com Unabridged (Online). n.d.
- ^ Brooks, R. (1986). "A robust layered control system for a mobile robot". IEEE Journal of Robotics and Automation. 2 (1): 14–23. doi:10.1109/JRA.1986.1087032. hdl:1721.1/6432. S2CID 10542804.
- ^ Brooks, R. (1986). "Asynchronous distributed control system for a mobile robot.". SPIE Conference on Mobile Robots. pp. 77–84.[permanent dead link]
- ^ Brooks, R. A., "A Robust Programming Scheme for a Mobile Robot", Proceedings of NATO Advanced Research Workshop on Languages for Sensor-Based Control in Robotics, Castelvecchio Pascoli, Italy, September 1986.
- ^ John Bardeen; Leon Cooper; J. R. Schriffer (December 1, 1957). Theory of Superconductivity. Vol. 108. p. 1175. Bibcode:1957PhRv..108.1175B. doi:10.1103/physrev.108.1175. ISBN 978-0-677-00080-0. S2CID 73661301. Retrieved June 6, 2014.
{{cite book}}
:|journal=
ignored (help) reprinted in Nikolaĭ Nikolaevich Bogoliubov (1963) The Theory of Superconductivity, Vol. 4, CRC Press, ISBN 0677000804, p. 73 - ^ John Daintith (2009). The Facts on File Dictionary of Physics (4th ed.). Infobase Publishing. p. 238. ISBN 978-1-4381-0949-7.
- ^ John C. Gallop (1990). SQUIDS, the Josephson Effects and Superconducting Electronics. CRC Press. pp. 1, 20. ISBN 978-0-7503-0051-3.
- ^ Durrant, Alan (2000). Quantum Physics of Matter. CRC Press. pp. 102–103. ISBN 978-0-7503-0721-5.
- ^ Wentorf, R. H.; Devries, R. C.; Bundy, F. P. (1980). "Sintered Superhard Materials". Science. 208 (4446): 873–80. doi:10.1126/science.208.4446.873. PMID 17772811. S2CID 34588568.
- ^ Fischer-Cripps, Anthony C. (2004) Nanoindentation. Springer. ISBN 0-387-22045-3. p. 198
- ^ Veprek, S.; Zeer, A. and Riedel, R. (2000) in Handbook of Ceramic Hard Materials, R. Riedel (ed.). Wiley, Weinheim. ISBN 3-527-29972-6
- ^ Dubrovinskaia, N.; Dubrovinsky, L.; Solozhenko, V. L. (2007). "Comment on "Synthesis of Ultra-Incompressible Superhard Rhenium Diboride at Ambient Pressure"". Science. 318 (5856): 1550c. Bibcode:2007Sci...318.1550D. doi:10.1126/science.1147650. PMID 18063772.
- ^ Weisstein, Eric W. "Chain Rule". Wolfram MathWorld. Wolfram Research. Retrieved 2 August 2016.
- ^ Larry C. Andrews; Ronald L. Phillips (2003). Mathematical Techniques for Engineers and Scientists. SPIE Press. p. 164. ISBN 978-0-8194-4506-3.
- ^ Ch V Ramana Murthy; NC Srinivas (2001). Applied Mathematics. New Delhi: S. Chand & Co. p. 337. ISBN 978-81-219-2082-7.
- ^ Jastrzebski, D. (1959). Nature and Properties of Engineering Materials (Wiley International ed.). John Wiley & Sons, Inc.
- ^ a b "Generic MMPDS Mechanical Properties Table". stressebook.com. 6 December 2014. Archived from the original on 1 December 2017. Retrieved 27 April 2018.
- ^ a b Degarmo, Black & Kohser 2003, p. 31
- ^ a b Smith & Hashemi 2006, p. 223
- ^ Czichos, Horst (2006). Springer Handbook of Materials Measurement Methods. Berlin: Springer. pp. 303–304. ISBN 978-3-540-20785-6.
- ^ Davis, Joseph R. (2004). Tensile testing (2nd ed.). ASM International. ISBN 978-0-87170-806-9.
- ^ Davis 2004, p. 33.
- ^ Einstein A. (1916), (Translation 1920), New York: H. Holt and Company
- ^ Einstein, Albert (November 28, 1919). "Time, Space, and Gravitation" . The Times.
- ^ Will, Clifford M (2010). "Relativity". Grolier Multimedia Encyclopedia. Retrieved 2010-08-01.
- ^ William D. Stevenson, Jr. Elements of Power System Analysis Third Edition, McGraw-Hill, New York (1975). ISBN 0-07-061285-4, p. 2
- ^ Serway, R. A. and Jewett, Jr. J.W. (2003). Physics for Scientists and Engineers. 6th Ed. Brooks Cole. ISBN 0-534-40842-7.
- ^ a b "Toughness", NDT Education Resource Center Archived 2020-04-11 at the Wayback Machine, Brian Larson, editor, 2001–2011, The Collaboration for NDT Education, Iowa State University
- ^ Askeland, Donald R. (January 2015). The science and engineering of materials. Wright, Wendelin J. (Seventh ed.). Boston, MA. p. 208. ISBN 978-1-305-07676-1. OCLC 903959750.
{{cite book}}
: CS1 maint: location missing publisher (link) - ^ Metha, Rohit. "11". The Principles of Physics. p. 378.
- ^ Agarwal, Anant. Foundations of Analog and Digital Electronic Circuits.Department of Electrical Engineering and Computer Science, Massachusetts Institute of Technology, 2005, p. 43
- ^ Winer, Ethan (2013). "Part 3". The Audio Expert. New York and London: Focal Press. ISBN 978-0-240-82100-9.
- ^ Klein, Christian Felix (1924) [1902]. Elementarmathematik vom höheren Standpunkt aus: Arithmetik, Algebra, Analysis (in German). 1 (3rd ed.). Berlin: J. Springer.
- ^ Klein, Christian Felix (2004) [1932]. Elementary Mathematics from an Advanced Standpoint: Arithmetic, Algebra, Analysis. Translated by Hedrick, E. R.; Noble, C. A. (Translation of 3rd German ed.). Dover Publications, Inc. / The Macmillan Company. ISBN 978-0-48643480-3. Archived from the original on 2018-02-15. Retrieved 2017-08-13.
- ^ R. Nagel (ed.), Encyclopedia of Science, 2nd Ed., The Gale Group (2002)
- ^ Boyer (1991), p. [page needed].
- ^ a b IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version: (1994) "Triple point". doi:10.1351/goldbook.T06502.
- ^ Compare 85 J/(K·mol) in David Warren Ball (20 August 2002). Physical Chemistry. Cengage Learning. ISBN 9780534266585. and 88 J/(K·mol) in Daniel L. Reger; Scott R. Goode; David W. Ball (27 January 2009). Chemistry: Principles and Practice. Cengage Learning. ISBN 9780534420123.
- ^ "Definition of TRUSS". 8 April 2023.
- ^ Plesha, Michael E.; Gray, Gary L.; Costanzo, Francesco (2013). Engineering Mechanics: Statics (2nd ed.). New York: McGraw-Hill Companies Inc. pp. 364–407. ISBN 978-0-07-338029-2.
- ^ Munson, Bruce Roy, T. H. Okiishi, and Wade W. Huebsch. "Turbomachines." Fundamentals of Fluid Mechanics. 6th ed. Hoboken, NJ: J. Wiley & Sons, 2009. Print.
- ^ Logan, Earl. "Handbook of turbomachinery". 1995. Marcel Deckker.
- ^ Vandad Talimi (Original author unknown). "Mechanical Equipment and Systems". 2013. Memorial University of Newfoundland. http://www.engr.mun.ca/~yuri/Courses/MechanicalSystems/Turbomachinery.pdf Archived 2018-02-19 at the Wayback Machine
- ^ Batchelor, G. (2000). Introduction to Fluid Mechanics.
- ^ Sen, D. (2014). "The Uncertainty relations in quantum mechanics" (PDF). Current Science. 107 (2): 203–218.
- ^ Venes D (2001). Taber's Cyclopedic Medical Dictionary (Twentieth ed.). Philadelphia: F.A. Davis Company. p. 2287. ISBN 0-9762548-3-2.
- ^ Schulz-Vogt HN (2006). "Vacuoles". Inclusions in Prokaryotes. Microbiology Monographs. Vol. 1. pp. 295–298. doi:10.1007/3-540-33774-1_10. ISBN 978-3-540-26205-3.
- ^ Brooker RJ, Widmaier EP, Graham LE, Stiling PD (2007). Biology (First ed.). New York: McGraw-Hill. p. 79. ISBN 978-0-07-326807-1.
- ^ Partington, James Riddick (1921). A text-book of inorganic chemistry for university students (1st ed.). OL 7221486M.
- ^ Murrell, J. N.; Kettle, S. F. A.; Tedder, J. M. (1985). The Chemical Bond (2nd ed.). John Wiley & Sons. ISBN 0-471-90759-6.
- ^ a b c d Silbey, Robert J.; Alberty, Robert A.; Bawendi, Moungi G. (2004). Physical Chemistry (4th ed.). Wiley. ISBN 978-0471215042.
- ^ Biography on Nobel prize website. Nobelprize.org (1 March 1911). Retrieved on 2013-11-08.
- ^ Meyers and Chawla (1999): "Mechanical Behavior of Materials", 98-103.
- ^ "viscosity". Merriam-Webster Dictionary. 22 May 2023.
- ^ Symon, Keith (1971). Mechanics (3rd ed.). Addison-Wesley. ISBN 978-0-201-07392-8.
- ^ Ciletti, M. D., Irwin, J. D., Kraus, A. D., Balabanian, N., Bickard, T. A., and Chan, S. P. (1993). Linear circuit analysis. In Electrical Engineering Handbook, edited by R. C. Dorf. Boca Raton: CRC Press. (pp.82–87)
- ^ IEEE 100 : the authoritative dictionary of IEEE standards terms.-7th ed. ISBN 0-7381-2601-2, page 23
- ^ Wildi, Theodore (2002). Electrical Machines, Drives and Power Systems. Pearson. p. 137. ISBN 978-0-13-093083-5.
- ^ "SI Brochure, 8th ed". Archived from the original on 2019-03-21. Retrieved 2021-10-02.
- ^ Council Directive on units of measurements 80/181/EEC Chapter 1.2.3., p. 6: "Special names for the unit of power: the name volt–ampere (symbol ‘VA’) when it is used to express the apparent power of alternating electric current, and var (symbol ‘var’) when it is used to express reactive electric power."
- ^ IUPAC Gold Book, definition of contact (Volta) potential difference.
- ^ a b International Bureau of Weights and Measures (2006), The International System of Units (SI) (PDF) (8th ed.), ISBN 92-822-2213-6, archived (PDF) from the original on 2021-06-04, retrieved 2021-12-16, p. 144
- ^ "Von Mises Criterion (Maximum Distortion Energy Criterion)". Engineer's edge. Retrieved 8 February 2018.
- ^ von Mises, R. (1913). Mechanik der festen Körper im plastisch deformablen Zustand. Göttin. Nachr. Math. Phys., vol. 1, pp. 582–592.
- ^ Pragnan Chakravorty, "What Is a Signal? [Lecture Notes]," IEEE Signal Processing Magazine, vol. 35, no. 5, pp. 175-177, Sept. 2018. https://doi.org/10.1109/MSP.2018.2832195
- ^ Hecht, Eugene (1987). Optics (2nd ed.). Addison Wesley. pp. 15–16. ISBN 978-0-201-11609-0.
- ^ Brian Hilton Flowers (2000). "§21.2 Periodic functions". An introduction to numerical methods in C++ (2nd ed.). Cambridge University Press. p. 473. ISBN 978-0-19-850693-5.
- ^ Raymond A. Serway; John W. Jewett (2006). Principles of physics (4th ed.). Cengage Learning. pp. 404, 440. ISBN 978-0-534-49143-7.
- ^ A. A. Sonin (1995). The surface physics of liquid crystals. Taylor & Francis. p. 17. ISBN 978-2-88124-995-2.
- ^ Keqian Zhang & Dejie Li (2007). Electromagnetic Theory for Microwaves and Optoelectronics. Springer. p. 533. ISBN 978-3-540-74295-1.
- ^ Bowser, Edward Albert (1920), An elementary treatise on analytic mechanics: with numerous examples (25th ed.), D. Van Nostrand Company, pp. 202–203.
- ^ McGraw-Hill Concise Encyclopedia of Science & Technology, Third Ed., Sybil P. Parker, ed., McGraw-Hill, Inc., 1992, p. 2041.
- ^ Wheel and Axle, The World Book Encyclopedia, World Book Inc., 1998, pp. 280-281
- ^ Dodge, Y (2003) The Oxford Dictionary of Statistical Terms, OUP. ISBN 0-19-920613-9 (entry for "winsorized estimation")
- ^ Wiktionary
- ^ Wiktionary
- ^ Wiktionary
Sources
[edit]- Boyer, Carl B. (1991). A History of Mathematics (Second ed.). John Wiley & Sons, Inc. ISBN 978-0-471-54397-8.
- Degarmo, E. Paul; Black, J T.; Kohser, Ronald A. (2003), Materials and Processes in Manufacturing (9th ed.), Wiley, ISBN 978-0-471-65653-1.
- Dodge, Y. (2003). The Oxford dictionary of Statistical Terms. Oxford University Press. ISBN 0-19-920613-9.
- Holzner, S. (2006). Physics for Dummies. John Wiley & Sons. Bibcode:2005pfd..book.....H. ISBN 978-0-470-61841-7.
Physics is the study of your world and the world and universe around you.
- Maxwell, J.C. (1878). Matter and Motion. D. Van Nostrand. ISBN 978-0-486-66895-6.
matter and motion.
- Smith, William F.; Hashemi, Javad (2006), Foundations of Materials Science and Engineering (4th ed.), McGraw-Hill, ISBN 978-0-07-295358-9.
- Young, H.D.; Freedman, R.A. (2014). Sears and Zemansky's University Physics with Modern Physics Technology Update (13th ed.). Pearson Education. ISBN 978-1-292-02063-1.