Jump to content

Fatty Knees

From Wikipedia, the free encyclopedia
(Redirected from Fatty Knees (dinghy))
Fatty Knees
Development
DesignerLyle Hess
NameFatty Knees
Boat
Crew1 (7' version)
2 (8' version)
2/3 (9' version)
TrapezeNo
Hull
TypeMonohull
ConstructionFibreglass
Hull weight90 lb (41 kg) (7' version)
110 lb (50 kg) (8' version)
110 lb (50 kg) (9' version)
LOA7 ft (2.1 m)
8 ft (2.4 m)
9 ft (2.7 m)
Beam4 ft (1.2 m) (7' version)
4 ft 3 in (1.30 m) (8' version)
4 ft 6 in (1.37 m) (9' version)
Hull appendages
Keel/board typeDaggerboard
Sails
Total sail area40 sq ft (3.7 m2) (7' version)
50 sq ft (4.6 m2) (8' version)
60 sq ft (5.6 m2) (9' version)

The Fatty Knees fibreglass sailing dinghies were designed by Lyle Hess[1] (1912–2002). Produced in 7' (2.1m), 8' (2.4m) and 9' (2.7m) long models. The 8' model has a 4' (1.2m) beam. Primarily designed as a yacht tender with good rowing and towing characteristics, the boat can be sailed, with enough width in the beam to provide stability.[2]

The hull has a lapstrake appearance. The thwarts and dagger-board trunk are fiberglass inserts glassed into the hull and are watertight. It is cat rigged with a Bermuda mainsail. A transom notch allows sculling. Equipped with oarlocks for rowing. A small outboard motor can be mounted to port. Sailing gear is designed to be stored inside the hull. About 2000 dinghies have been produced.[citation needed]

References

[edit]
  1. ^ Nicholson, Darrell (January 7, 2004). "Inflatable Tenders vs. Hard Tenders". Cruising World. Retrieved May 3, 2010.
  2. ^ "Stable Sailor". Popular Science. 220 (6): 75. 1982.
[edit]