Jump to content

File:BOP stack top kill mode plus broken riser.svg

Page contents not supported in other languages.
This is a file from the Wikimedia Commons
From Wikipedia, the free encyclopedia

Original file (SVG file, nominally 1,424 × 1,223 pixels, file size: 36 KB)

Description
English: Schematic illustration of a subsea blowout preventer stack installed on the seabed with kill and choke lines connected for a top kill operation plus a riser insertion tube placed inside the end of a broken riser on the left.

Legend:

  • red represents the blowout preventer stack
  • grey represents the oil flow passage
  • white tubing represents the kill (left) and choke (right) lines
  • brown represents the top of the subsea well casing
  • the five grey rectangles within the lower red shape represent ram-type blowout preventers
  • the two grey rectangles within the upper red shape represent annular-type blowout preventers
  • dark blue represents the riser insertion tube placed inside the end of the broken riser lying on the seabed
Date
Source

Own illustration, created with approximate reference to the following sources:

Using Inkscape 0.47.
Author User:84user
Other versions
BOP stack with top kill mud lines shown
stack with top kill mud lines attached
stack set up for a top kill plus riser insertion tube
Public domain I, the copyright holder of this work, release this work into the public domain. This applies worldwide.
In some countries this may not be legally possible; if so:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.
 
W3C-validity not checked.
 
This W3C-unspecified vector image was created with Inkscape .

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

27 May 2010

image/svg+xml

963d8e642c06fc62b000c9247097ecbb6120b19b

36,894 byte

1,223 pixel

1,424 pixel

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current23:36, 27 May 2010Thumbnail for version as of 23:36, 27 May 20101,424 × 1,223 (36 KB)84user{{Information |Description={{en|1=Schematic illustration of a subsea blowout preventer stack installed on the seabed with kill and choke lines connected for a top kill operation plus a riser insertion tube placed inside the end of a broken riser on the le

The following page uses this file: