File:Mercury turbine interrupter.png

Page contents not supported in other languages.
This is a file from the Wikimedia Commons
From Wikipedia, the free encyclopedia

Mercury_turbine_interrupter.png(731 × 539 pixels, file size: 93 KB, MIME type: image/png)

Summary

Description
English: A mercury turbine interrupter, an obsolete electric device used with large induction coils around 1900 to repeatedly interrupt the primary current to the coil, to create the magnetic flux changes necessary to generate its high voltage output. Small, low power induction coils use a vibrating arm interrupter on the coil to break the primary current. However these were inadequate for the large coils used to power x-ray machines and spark gap radio transmitters up to the 1920s. The high primary currents (up to 30 A) created sparks at the interrupter contacts which quickly destroyed them, and vibrating interrupters were not capable of interruption rates over about 50 breaks per second. Therefore mercury turbines were used on large coils.

The mercury turbine interrupter, invented around 1899, consisted of a glass tank (left) partly filled with the liquid metal mercury (omitted in this picture). The electric motor (right) drove a pump in the tank which sprayed a solid stream of mercury at the rotating sawtooth-shaped contacts (visible in tank) The mercury nozzle was connected to one side of the primary circuit, while the contact wheel was connected to the other. When the stream hit a tooth it completed the primary circuit, producing magnetic flux in the coil. When the stream fell between the teeth it broke the primary circuit, causing the magnetic field in the coil to collapse, inducing a high voltage pulse in the secondary of the coil. The advantage of the turbine was that it could handle very heavy currents, could produce interruption rates of up to 10,000 breaks per second, and the frequency and "dwell time" could be conveniently adjusted. The frequency of the breaks was controlled by varying the speed of the motor, while the "dwell time", the percentage of a cycle the circuit was closed, could be varied by raising or lowering the mercury nozzle. Lowering the nozzle caused the stream to hit the tooth at a lower level, where it was narrower, reducing the time the primary circuit is closed.
Date before 1908
date QS:P,+1908-00-00T00:00:00Z/7,P1326,+1908-00-00T00:00:00Z/9
Source Downloaded April 20, 2013 from Henri Armagnat (1908) The Theory and Design of Induction Coils, McGraw Publishing Co., New York, translated by Otis Allen Kenyon, p.133, fig. 82 on Google Books
Author Unknown authorUnknown author

Licensing

Public domain
Public domain
This media file is in the public domain in the United States. This applies to U.S. works where the copyright has expired, often because its first publication occurred prior to January 1, 1929, and if not then due to lack of notice or renewal. See this page for further explanation.

United States
United States
This image might not be in the public domain outside of the United States; this especially applies in the countries and areas that do not apply the rule of the shorter term for US works, such as Canada, Mainland China (not Hong Kong or Macao), Germany, Mexico, and Switzerland. The creator and year of publication are essential information and must be provided. See Wikipedia:Public domain and Wikipedia:Copyrights for more details.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current03:40, 21 April 2013Thumbnail for version as of 03:40, 21 April 2013731 × 539 (93 KB)ChetvornoUser created page with UploadWizard
The following pages on the English Wikipedia use this file (pages on other projects are not listed):

Global file usage

The following other wikis use this file:

Metadata