File:Microstrip-bend.svg

Page contents not supported in other languages.
This is a file from the Wikimedia Commons
From Wikipedia, the free encyclopedia

Original file(SVG file, nominally 200 × 149 pixels, file size: 14 KB)

Summary

Description
English: Mitred bend in microstrip with labeled dimensions. For low VSWR, the mitre dimensions should be x/d = 0.52 + 0.65 * exp(-1.35 * w / h) irrespective of εr (according to Douville and James, IEEE MTT-26 no.3 Mar. 1978 p175)
Date
Source Own work (catslash)
Author James Wlodarczyk (catslash)

Licensing

Public domain This work has been released into the public domain by its author, Catslash at English Wikipedia. This applies worldwide.
In some countries this may not be legally possible; if so:
Catslash grants anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.

Original upload log

The original description page was here. All following user names refer to en.wikipedia.
  • 2006-12-23 02:26 Catslash 200×149× (14294 bytes) {{Information| |Description = Mitred bend in microstrip with labled dimensions. For low VSWR, the mitre dimensions should be x/d = 0.52 + 0.65 * exp(-1.35 * w / h) irrespective of εr (according to Douville and James, IEEE MTT-26 no.3 Mar. 1978 p175) |So

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

23 December 2006

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current16:31, 14 April 2011Thumbnail for version as of 16:31, 14 April 2011200 × 149 (14 KB)Wizzard{{Information |Description=Mitred bend in microstrip with labeled dimensions. For low VSWR, the mitre dimensions should be x/d = 0.52 + 0.65 * exp(-1.35 * w / h) irrespective of εr (according to Douville and James, IEEE MTT-26 no.3 Mar. 1978 p175) |Sourc
The following pages on the English Wikipedia use this file (pages on other projects are not listed):

Global file usage

The following other wikis use this file: