Jump to content

File:Two-Dimensional Low-Turbulence Tunnel.jpg

Page contents not supported in other languages.
This is a file from the Wikimedia Commons
From Wikipedia, the free encyclopedia

Original file (2,985 × 2,555 pixels, file size: 894 KB, MIME type: image/jpeg)

Summary

Description

Collection: NASA Image eXchange Collection Title: Two-Dimensional Low-Turbulence Tunnel

Description: Construction of the wood frame for the Two-Dimensional Low-Turbulence Tunnel. The Two-Dimensional Low-Turbulence Tunnel was originally called the Refrigeration or "Ice" tunnel because it was intended to support research on aircraft icing. The tunnel was built of wood, lined with sheet steel, and heavily insulated on the outside. Refrigeration equipment was installed to generate icing conditions inside the test section. The NACA sent out a questionnaire to airline operators, asking them to detail the specific kinds of icing problems they encountered in flight. The replies became the basis for a comprehensive research program begun in 1938 when the tunnel commenced operation. Research quickly focused on the concept of using exhaust heat to prevent ice from forming on the wing's leading edge. This project was led by Lewis Rodert, who later would win the Collier Trophy for his work on deicing. By 1940, aircraft icing research had shifted to the new Ames Research Laboratory, and the Ice tunnel was refitted with screens and honeycomb. Researchers were trying to eliminate all turbulence in the test section. From TN 1283: "The Langley two-dimensional low-turbulence pressure tunnel is a single-return closed-throat tunnel.... The tunnel is constructed of heavy steel plate so that the pressure of the air may be varied from approximately full vacuum to 10 atmospheres absolute, thereby giving a wide range of air densities. Reciprocating compressors with a capacity of 1200 cubic feet of free air per minute provide compressed air. Since the tunnel shell has a volume of about 83,000 cubic feet, a compression rate of approximately one atmosphere per hour is obtained. ... The test section is rectangular in shape, 3 feet wide, 7 1/2 feet high, and 7 1/2 feet long. ... The over-all size of the wind-tunnel shell is about 146 feet long and 58 feet wide with a maximum diameter of 26 feet. The test section and entrance and exit cones are surrounded by a 22-foot diameter section of the shell to provide a space to house much of the essential equipment.

Date: 02.04.1938 Credit: NASA Langley Research Center (NASA-LaRC) [ lisar.larc.nasa.gov/ ]

ID: EL-1999-00646 Other ID: L14845.3 UID: SPD-NIX-EL-1999-0064 6 Original url: nix.ksc.nasa.gov/info?id=EL-1999-00646&orgid=1

SOURCE: nasaimages.org/luna/servlet/detail/nasaNAS~2~2~13192~115410

Visit www.nasaimages.org for the most comprehensive compilation of NASA stills, film and video, created in partnership with Internet Archive.
Date
Source Two-Dimensional Low-Turbulence Tunnel
Author NASA on The Commons
Permission
(Reusing this file)
NASA on The Commons @ Flickr Commons

Licensing

This image was taken from Flickr's The Commons. The uploading organization may have various reasons for determining that no known copyright restrictions exist, such as:
  1. The copyright is in the public domain because it has expired;
  2. The copyright was injected into the public domain for other reasons, such as failure to adhere to required formalities or conditions;
  3. The institution owns the copyright but is not interested in exercising control; or
  4. The institution has legal rights sufficient to authorize others to use the work without restrictions.

More information can be found at https://flickr.com/commons/usage/.


Please add additional copyright tags to this image if more specific information about copyright status can be determined. See Commons:Licensing for more information.
This image was originally posted to Flickr by NASA on The Commons at https://www.flickr.com/photos/44494372@N05/4940559701. It was reviewed on 2012-08-29 04:02:13 by FlickreviewR, who found it to be licensed under the terms of the No known copyright restrictions, which is compatible with the Commons. It is, however, not the same license as given above, and it is unknown whether that license ever was valid.

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

1 August 2010

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current19:24, 15 October 2020Thumbnail for version as of 19:24, 15 October 20202,985 × 2,555 (894 KB)RemitamineHigher resolution version
02:31, 29 August 2012Thumbnail for version as of 02:31, 29 August 20121,536 × 1,315 (349 KB)Stobkcuf== {{int:filedesc}} == {{Information |Description='''Collection:''' NASA Image eXchange Collection '''Title:''' Two-Dimensional Low-Turbulence Tunnel '''Description:''' Construction of the wood frame for the Two-Dimensional Low-Turbulence Tunnel. The ...

The following page uses this file: