Girih tiles

From Wikipedia, the free encyclopedia
Girih tiles
Patterned Girih tiles
Construction lines are usually hidden: geometric tiles on left, girih pattern on right.

Girih tiles are a set of five tiles that were used in the creation of Islamic geometric patterns using strapwork (girih) for decoration of buildings in Islamic architecture. They have been used since about the year 1200 and their arrangements found significant improvement starting with the Darb-i Imam shrine in Isfahan in Iran built in 1453.

Five tiles[edit]

The five shapes of the tiles, and their Persian names, are:[1]

Caption text
Name Persian name number of corners convex angle specifications
regular decagon Tabl 10 yes 144°
elongated (irregular convex) hexagon Shesh Band 6 yes [ 72°, 144°, 144° ] ×2
bow tie (non-convex hexagon) Sormeh Dan 6 no [ 72°, 72°, 216° ] ×2
rhombus Torange 4 yes [ 72°, 108° ] ×2
regular pentagon Pange 5 yes 108°

All sides of these figures have the same length, and all their angles are multiples of 36° (π/5 radians). All of them except the pentagon have bilateral (reflection) symmetry through two perpendicular lines. Some have additional symmetries. Specifically, the decagon has tenfold rotational symmetry (rotation by 36°); and the pentagon has fivefold rotational symmetry (rotation by 72°).

The emergence of girih tiles[edit]

By the late 11th century, the Islamic artists in North Africa start to use “tile mosaic”, which is the predecessor of tessellation.[2] By 13th century, the Islamic discovered a new way to construct the “tile mosaic” due to the development of arithmetic calculation and geometry—the girih tiles.[3]

Girih[edit]

Girih are lines (strapwork) that decorate the tiles. The tiles are used to form girih patterns, from the Persian word گره, meaning "knot".[4] In most cases, only the girih (and other minor decorations like flowers) are visible rather than the boundaries of the tiles themselves. The girih are piece-wise straight lines that cross the boundaries of the tiles at the center of an edge at 54° (3π/10 radians) to the edge. Two intersecting girih cross each edge of a tile. Most tiles have a unique pattern of girih inside the tile that are continuous and follow the symmetry of the tile. However, the decagon has two possible girih patterns one of which has only fivefold rather than tenfold rotational symmetry.

Mathematics of girih tilings[edit]

In 2007, the physicists Peter J. Lu and Paul J. Steinhardt suggested that girih tilings possess properties consistent with self-similar fractal quasicrystalline tilings such as Penrose tilings, predating them by five centuries.[5][6]

This finding was supported both by analysis of patterns on surviving structures, and by examination of 15th-century Persian scrolls. There is no indication of how much more the architects may have known about the mathematics involved. It is generally believed that such designs were constructed by drafting zigzag outlines with only a straightedge and a compass. Templates found on scrolls such as the 97-foot (29.5 metres) long Topkapi Scroll may have been consulted. Found in the Topkapi Palace in Istanbul, the administrative center of the Ottoman Empire, and believed to date from the late 15th century, the scroll shows a succession of two- and three-dimensional geometric patterns. There is no text, but there is a grid pattern and color-coding used to highlight symmetries and distinguish three-dimensional projections. Drawings such as shown on this scroll would have served as pattern-books for the artisans who fabricated the tiles, and the shapes of the girih tiles dictated how they could be combined into large patterns. In this way, craftsmen could make highly complex designs without resorting to mathematics and without necessarily understanding their underlying principles.[7]

This use of repeating patterns created from a limited number of geometric shapes available to craftsmen of the day is similar to the practice of contemporary European Gothic artisans. Designers of both styles were concerned with using their inventories of geometrical shapes to create the maximum diversity of forms. This demanded a skill and practice very different from mathematics.[7]

Geometric construction of an interlocking decagram-polygon mosaic design[edit]

First, divide the right angle A into five parts of the same degree by creating four rays that start from A. Find an arbitrary point C on the second ray and drop perpendiculars from C to the sides of angle A counterclockwise. This step creates the rectangle ABCD along with four segments that each have an endpoint at A; other endpoints are the intersections of the four rays with the two sides of BC and DC of rectangle ABCD. Then, find the midpoint of the fourth segment created from the fourth ray point E. Construct an arc with center A and radius AE to intersect AB at point F and the second ray at point G. The second segment is now a part of the rectangle's diagonal. Make a line parallel to AD and passing through point G that intersects the first ray at point H and the third ray at point I. The line HF passes through point E and intersects the third ray at L and line AD at J. Construct a line passing through J that is parallel to the third ray. Also construct line EI and find M which is the intersection of this line with AD. From the point F make a parallel line to the third ray to meet the first ray at K. Construct segments GK, GL, and EM. Find the point N such that GI = IN by constructing a circle with center I and radius IG. Construct the line DN which is parallel to GK to intersect the line emanating from J, and find P to complete the regular pentagon EINPJ. Line DN meets the perpendicular bisector of AB at Q. From Q construct a line parallel to FK to intersect ray MI at R. As shown in the figure, using O which is the center of the rectangle ABCD as a center of rotation for 180°, one can make the fundamental region for the tiling.[1]

An interlocking decagram-polygon mosaic design
An interlocking decagram-polygon mosaic design
An interlocking decagram-polygon mosaic design
An interlocking decagram-polygon mosaic design

Geometric construction of a tessellation from Mirza Akbar architectural scrolls[edit]

First, divide the right angle into five congruent angles. An arbitrary point P is selected on the first ray counterclockwise. For the radius of the circle inscribed in the decagram, one half of the segment created from the third ray, segment AM, is selected. The following figure illustrates a step-by-step compass-straightedge visual solution to the problem by the author.[1] Note that the way to divide a right angle into five congruent angles is not a part of the instructions provided, because it is considered an elementary step for designers.

Step-by-step compass-straightedge construction of the tessellation

Examples[edit]

The girih has been widely applied on architecture. Girih on Persian geometric windows meet the requirements of Persian architecture. The specific types of embellishments utilized in orosi typically linked the windows to the patron's social and political eminence. The more ornate a window is, the higher social and economic status the owner is more likely to have. A good example of this is Azad Koliji, a Dowlatabad Garden in Iran [citation needed]. The girih patterns on its window successfully demonstrate multiple layers. The first layer would be the actual garden, of which people can have a glimpse when they open the window. Then there is the first girih pattern on the outside of the window, the carved pattern. Another artificial layer is represented by the colorful glass of the window, whose multicolored layers create the sense of a mass of flowers. This abstract layer forms a clear contradiction with the real layer outside the window, and gives the space for the imagination.[8]

See also[edit]

References[edit]

  1. ^ a b c Sarhangi, Reza (2012). "Interlocking Star Polygons in Persian Architecture: The Special Case of the Decagram in Mosaic Designs". Nexus Netw J. 14 (2). p. 350. doi:10.1007/s00004-012-0117-5. S2CID 253596464.
  2. ^ Hattstein /Delius., Markus/Peter (2013). Islam : art and architecture. Potsdam : H.F. Ullmann. p. 448. ISBN 978-3848003808.
  3. ^ Lu, P. J.; Steinhardt, P. J. (2007). "Decagonal and Quasi-Crystalline Tilings in Medieval Islamic Architecture". Science. 315 (5815): 1106–1110. Bibcode:2007Sci...315.1106L. doi:10.1126/science.1135491. JSTOR 20039057. PMID 17322056. S2CID 10374218.
  4. ^ Sebastian R. Prange (September–October 2009). "The Tiles of Infinity". Saudi Aramco World: 24–31. Archived from the original on 2010-01-13. Retrieved 2010-01-08.
  5. ^ Peter J. Lu and Paul J. Steinhardt (2007). "Decagonal and Quasi-crystalline Tilings in Medieval Islamic Architecture". Science. 315 (5815): 1106–1110. Bibcode:2007Sci...315.1106L. doi:10.1126/science.1135491. PMID 17322056. S2CID 10374218.
  6. ^ Supplemental figures
  7. ^ a b Gulru Necipoglu (1995). The Topkapi Scroll: Geometry and Ornament in Islamic Architecture. Getty Research Institute.
  8. ^ Koliji, Hooman (2015). "Built on Light: The 'Crafty' Art of Geometric Patterned Windows". International Journal of Islamic Architecture. 4: 75–108. doi:10.1007/s00004-016-0288-6.

External links[edit]