Jump to content

Half-speed mastering

From Wikipedia, the free encyclopedia
(Redirected from Half Speed Mastering)

Half-speed mastering is a technique occasionally used when cutting the acetate lacquers from which phonograph records are produced. The cutting machine platter is run at half of the usual speed (16 23 rpm for 33 13 rpm records) while the signal to be recorded is fed to the cutting head at half of its regular playback speed.[1]

The reasons for using this technique vary, but it is generally used for improving the high-frequency response of the finished record.[2] By halving the speed during cutting, very high frequencies that are difficult to cut become much easier to cut since they are now mid-range frequencies.[3]

Mobile Fidelity Sound Lab used half-speed mastering for its Original Master Recording LP's.

References

[edit]
  1. ^ Hoffman, Charles (December 22, 2018). "Half-Speed Mastering Explained". sonicscoop.com. Retrieved 2021-02-19. [dead link]
  2. ^ "All You Need To Know about Half Speed Mastering | uDiscover". uDiscover Music. Retrieved 2021-08-13.
  3. ^ Henshall, Marc (May 7, 2019). "What is Half-Speed Mastering?". www.yoursoundmatters.com. Retrieved 2021-02-19.