Jump to content

New York State Route 961F

From Wikipedia, the free encyclopedia
(Redirected from NY 961F)
New York State Route 961F marker
New York State Route 961F
Map
Map of Allegany and Steuben counties with NY 961F highlighted in red
Route information
Maintained by NYSDOT
Length5.90 mi[1] (9.50 km)
Existedmid-1970s[2][3]–present
Major junctions
West end NY 70 in Burns
East end NY 36 in Arkport
Location
CountryUnited States
StateNew York
CountiesAllegany, Steuben
Highway system
NY 895 NY 962J

New York State Route 961F (NY 961F) is a reference route in the Southern Tier of New York in the United States. It extends for 5.90 miles (9.50 km) from an intersection with NY 70 east of the Allegany County village of Canaseraga to a junction with NY 36 in the Steuben County village of Arkport. Although NY 961F follows a mostly north–south alignment, it is inventoried as an east–west route by the New York State Department of Transportation (NYSDOT). Unlike most reference routes, NY 961F is signed as a touring route. The highway was part of NY 38 in the 1920s and part of NY 70 from the 1930s to the 1970s.

Route description

[edit]
NY 961F proceeding west from its terminus, NY 36, in Arkport

NY 961F begins just east of the village of Canaseraga at an intersection with NY 70 in the town of Burns. The route heads southward, crossing the Norfolk Southern Railway-owned Southern Tier Line by way of an overpass prior to curving southeastward at the base of Tildon Hill,[4][5] a mountain peaking at 1,800 feet (550 m) above sea level.[6] Over the next 2 miles (3.2 km), the highway heads slightly southeastward,[4] running along the western edge of an undeveloped valley formed by Tildon Hill to the west and another plateau 1.5 miles (2.4 km) to the east. This section of the route loosely parallels the Southern Tier Line, which runs through the marshy center of the gully.[7] As NY 961F approaches the AlleganySteuben County line, it bypasses the hamlet of Burns, a railside community situated 0.5 miles (0.8 km) to the east on Burns Road (County Route 14).[4]

The terrain surrounding the highway remains the same in the Steuben County town of Dansville, where the route takes on a slightly more easterly alignment as the valley narrows in width.[7] It eventually comes within view of the rail line,[4] at which point the road turns back to the southeast and follows the Southern Tier Line along the western edge of a marsh known as The Muck.[7] During this stretch, NY 961F encounters its first pocket of development, consisting of a small handful of isolated farms and homes. The buildings give way to open fields in the town of Hornellsville, where the route encounters the Canisteo River and enters the village of Arkport about 0.5 miles (0.8 km) into the town. NY 961F turns east at the river, becoming West Avenue as it crosses the Southern Tier Line at-grade and runs past closely spaced homes on both sides of the road. The route soon reaches the village center, where it ends at a junction with NY 36.[4][5]

History

[edit]

What is now NY 961F was state-maintained as early as 1920, by which time the highway had been designated as a spur of Route 15, an unsigned legislative route extending from Hornell to Scottsville.[8] The spur route was eliminated on March 1, 1921.[9] In the mid-1920s, the former spur became part of NY 38, an east–west highway extending from Angelica to Penn Yan via Canaseraga and Arkport.[10][11] In the 1930 renumbering of state highways in New York, NY 38 was reassigned elsewhere in the state while its former routing became part of several new routes. One of these was NY 70, which began at Whitney Crossings (now Garwoods) and passed through Canaseraga and Arkport on its way to Kanona.[12] NY 70 was realigned in the mid-1970s to follow what had been NY 70A east from Canaseraga.[2][3] Its former routing between Canaseraga and Arkport became reference route NY 961F.[5]

Major intersections

[edit]
CountyLocationmikmDestinationsNotes
AlleganyBurns0.000.00 NY 70Western terminus
SteubenArkport5.90[1]9.50

NY 36 (New Main Street) to I-86 / NY 17
Eastern terminus
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

[edit]

References

[edit]
  1. ^ a b "2008 Traffic Data Report for New York State" (PDF). New York State Department of Transportation. June 16, 2009. p. 360. Retrieved January 10, 2010.
  2. ^ a b New York and New Jersey Tourgide Map (Map). Cartography by Rand McNally and Company. Gulf Oil Company. 1974.
  3. ^ a b New York (Map) (1977–78 ed.). Cartography by General Drafting. Exxon. 1977.
  4. ^ a b c d e "overview map of NY 961F" (Map). Google Maps. Retrieved November 3, 2015.
  5. ^ a b c New York State Department of Transportation (January 2017). Official Description of Highway Touring Routes, Bicycling Touring Routes, Scenic Byways, & Commemorative/Memorial Designations in New York State (PDF). pp. 1, 64. Retrieved January 10, 2017.
  6. ^ Canaseraga Quadrangle – New York (Map). 1:24,000. 7.5 Minute Series (Topographic). United States Geological Survey. 1964. Retrieved February 18, 2011.
  7. ^ a b c Arkport Quadrangle – New York (Map). 1:24,000. 7.5 Minute Series (Topographic). United States Geological Survey. 1978. Retrieved February 18, 2011.
  8. ^ New York State Department of Highways (1920). Report of the State Commissioner of Highways. Albany, NY: J. B. Lyon Company. p. 524. Retrieved February 18, 2011.
  9. ^ New York State Legislature (1921). "Tables of Laws and Codes Amended or Repealed". Laws of the State of New York passed at the One Hundred and Forty-Fourth Session of the Legislature. Albany, NY: J. B. Lyon Company. pp. 42, 56. Retrieved February 18, 2011.
  10. ^ "New York's Main Highways Designated by Numbers". The New York Times. December 21, 1924. p. XX9.
  11. ^ Official Map Showing State Highways and other important roads (Map). Cartography by Rand McNally and Company. State of New York Department of Public Works. 1926.
  12. ^ Dickinson, Leon A. (January 12, 1930). "New Signs for State Highways". The New York Times. p. 136.
[edit]
KML is from Wikidata