Jump to content

Pignone anti-tank mines

From Wikipedia, the free encyclopedia
(Redirected from Pignone mine P-1)
Pignone mod.43
Pignone mod.43 type 2 conserved at the Imperial War Museums
Typeanti-tank mine
Place of originKingdom of Italy
Service history
In service1943-1945
Used byRoyal italian Army
WarsWorld War II
Production history
VariantsType 1 and Type 2
Specifications
Mass7.3 kilograms (16 lb)
Height145 millimetres (5.7 in)
Diameter370 millimetres (15 in)

FillingTNT
Filling weight5 kilograms (11 lb)
Detonation
mechanism
Pressure activated (136 kilograms (300 lb) of pressure)

The Pignone mod.43 were bakelite cased Italian anti-tank blast mines used during the Second World War in North Africa and Italy.

History

[edit]

The Pignone mines were the most modern Italian anti-tank mines of WWII, they were produced starting from 1943 in two versions: type 1 and type 2, which differed by the external shaping and the activating pressure which was respectively 50 kilograms (110 lb) and 136 kilograms (300 lb). Although the mines had plastic cases, they had a number of metal components, rendering them detectable to mine detectors.[1]

Post WW2 Development

[edit]

The Pignone P-1 and Pignone P-2 were plastic cased Italian anti-tank blast mines.

The P-1 has circular plate like body 33.5 centimeters in diameter and 14 centimeters high with a central raised pressure plate. The P-1 uses a 7.0 kilograms (15.4 lb) main charge of TNT.

The P-2 has a circular bowl like body 33 centimeters in diameter and 12.7 centimeters high. It uses a smaller 5.0 kilograms (11 lb) TNT charge.

Pressure of between 110 and 150 kilograms (242 and 330 lb) on the pressure plate of either of the mines compresses a rubber collar, pushing down the head of the fuze. The downward movement of the fuze ruptures the shear pins freeing the head of the fuze. The fuze head continues downwards, compressing a rubber cylinder which presses down on the striker assembly until two retaining balls are released. The striker is then pushed by a spring into a percussion cap which triggers a booster followed by the main charge.

Diagrams of the P-1 and P-2 mines (not to scale).

References

[edit]
  1. ^ U.S Department of the Army (1943). Italian and French explosive ordinance. Department of the army technical manual. p. 171.
  • Landmine and Countermine Warfare, North Africa, 1940-1943