Jump to content

Programmer's key

From Wikipedia, the free encyclopedia
(Redirected from Programmer's Key)
The interrupt button/programmer's key protruding from the air vent on the left-hand side of an Apple Macintosh Classic II computer (on the left, above the circular symbol)

The programmer's key, or interrupt button, is a button or switch on Classic Mac OS-era Macintosh systems, which jumps to a machine code monitor. The symbol on the button is ⎉: U+2389 CIRCLED HORIZONTAL BAR WITH NOTCH. On most 68000 family based Macintosh computers, an interrupt request can also be sent by holding down the command key and pressing the power key on the keyboard. This effect is also simulated by the 68000 environment of the Mac OS nanokernel on PowerPC machines and the Classic environment.

A plastic insert came with Macintosh 128K, Macintosh 512K, Macintosh Plus, and Macintosh SE computers that could be attached to the exterior of the case and was used to press an interrupt button located on the motherboard.[1][2]

Modern Mac hardware no longer includes the interrupt button, as the Mac OS X operating system has integrated debugging options. In addition, Mac OS X's protected memory blocks direct patching of system memory (in order to better secure the system).

See also

[edit]


References

[edit]
  1. ^ Torres, Gabriel (January 2, 2013). "Inside the Macintosh Plus". Hardware Secrets. Retrieved September 18, 2018.
  2. ^ Cuccia, Sandro (January 25, 2014). "Happy Birthday, Mac - How to Recover From the Dreaded Bomb Box Error Message". The Mac Observer. Retrieved September 18, 2018.
[edit]