Jump to content

Sun StorageTek SL8500

From Wikipedia, the free encyclopedia
(Redirected from SL8500)
A HBT controller module for StorageTek SL8500.
The HBT card translates commands from the HBC controller card into unique drive commands, transferred across differential RS-422 lines. The HBT card contain 66 UARTs; 64 are responsible for the parallel-to-serial conversion for the tape drives and the remaining two communicate with the tape environmental monitor card (HBD card).[1]

Oracle StorageTek SL8500 is an enterprise-class robotic tape library.

Each library module starts with a capacity of 1448 tape cartridges, and expands in 1728 cartridge increments to a maximum capacity of 10088.[2] It supports up to 64 tape drives and 4 or 8 independent robots in each library.[3] Each tape drive installed in the SL8500 library has an independent data path. The aggregate data rate for all drives reaches 58 TB/hour per module using T10000D drives, more with compression.

Up to ten such modules can be connected side-by-side and automatically pass tapes between each other, forming a complex capable of storing over 925 PB of data and mounting 640 tape drives.

References

[edit]
  1. ^ SL8500 User’s Guid, page 12
  2. ^ Sun Microsystems. "StorageTek StreamLine™ SL8500 - modular library system" (PDF). Retrieved 3 May 2021.
  3. ^ Oracle. "Oracle's StorageTek SL8500 modular library system - Technical Specifications" (PDF). Retrieved 5 December 2017.
[edit]