Jump to content

Suzuki M engine

From Wikipedia, the free encyclopedia
(Redirected from Suzuki M13AA engine)
Suzuki M engine
Overview
ManufacturerSuzuki
Layout
ConfigurationNaturally aspirated
Inline-4
Displacement
  • 1.3 L (1,328 cc)
  • 1.5 L (1,490 cc)
  • 1.6 L (1,586 cc)
  • 1.8 L (1,796 cc)
Cylinder bore
  • 78 mm (3.07 in)
  • 83 mm (3.27 in)
Piston stroke
  • 69.5 mm (2.74 in)
  • 78 mm (3.07 in)
  • 83 mm (3.27 in)
Cylinder block materialAluminum
Cylinder head materialAluminum
ValvetrainDOHC 4 valves x cyl.
with VVT
Valvetrain drive systemTiming Chain
Compression ratio9.5:1, 9.6:1, 9.7:1, 10.3:1, 10.5:1, 11.0:1, 11.1:1
RPM range
Max. engine speed7200 rpm
Combustion
Fuel systemMulti-point fuel injection
Fuel typeGasoline
Oil systemWet sump
Cooling systemWater-cooled
Output
Power output83.8–134 hp (62.5–99.9 kW)
Torque output110–190 N⋅m (81–140 lb⋅ft)

The Suzuki M engine family is a line of automobile engines from Suzuki. Ranging in displacement from 1.3 L to 1.8 L, it is a modern engine line with dual overhead cams, 16 valves, and multi-point fuel injection (MPFI). Fully developed in-house following Suzuki's separation from General Motors, the M engine replaced the long-lived G engine family.[1]

M13A

[edit]

The M13A displaces 1.3 L (1,328 cc); bore and stroke is 78 mm × 69.5 mm (3.07 in × 2.74 in). It has a 9.5:1 compression ratio and two variants:

Automobile Power Torque Notes
Jimny 85 PS (63 kW) at 6,000 rpm 110 N⋅m (81 lb⋅ft) at 4,100 rpm
Swift 92 PS (68 kW) at 5,800 rpm 116 N⋅m (86 lb⋅ft) at 4,200 rpm VVT

M13AA

[edit]

The M13AA is an automotive engine manufactured by Suzuki Motor Corporation. The M13AA is a 1.3 L (1,328 cc) inline-four cylinder, 16 valve VVT engine used in the Suzuki Jimny, Suzuki Swift & Suzuki Ignis from 2005.

1.3 M13AA 1.3 L (1,328 cc) DOHC 16v MPFI VVT (Jimny)

  • Bore x Stroke 78 mm × 69.5 mm (3.07 in × 2.74 in)
  • Compression Ratio 9.5:1
  • 85 PS (63 kW) at 6000 rpm, 110 N⋅m (81 lb⋅ft) at 4100 rpm

M15A

[edit]

The M15A displaces 1.5 L (1,490 cc); bore is and stroke 78 mm × 78 mm (3.07 in × 3.07 in). This engine has a variable valve timing valvetrain. With a 9.5:1 compression ratio, it produces 100 PS (74 kW) at 5,900 rpm and 133 N⋅m (98 lb⋅ft) at 4,100 rpm. The M15A used in the Suzuki Ignis (HT81S) has a higher compression ratio of 11.0:1, and produces 112 PS (82 kW) at 6400 rpm and 143 N⋅m (105 lb⋅ft) at 4100 rpm.

(Ignis)

  • Compression Ratio 11.0:1
  • 112 PS (82 kW) at 6400 rpm, 105 lb⋅ft (142 N⋅m) at 4100 rpm

(Swift/SX4 )

  • Compression Ratio 9.5:1
  • 100 PS (74 kW) at 5900 rpm, 133 N⋅m (98 lb⋅ft) at 4100 rpm

(S-Cross - Indonesian Version)

  • Compression Ratio 10.3:1
  • 80 kW (109 PS) at 6000 rpm, 138 N⋅m (102 lb⋅ft) at 4400 rpm

Application:

M16A

[edit]

The M16A displaces 1.6 L (1,586 cc). Bore is and stroke 78 mm × 83 mm (3.07 in × 3.27 in). This engine has a DOHC variable valve timing valve train and a multipoint injection system. The engine had many iterations, depending on the car in which it was installed and the intended use of the car. The M16A engine uses a chain cam instead of a cam belt. General dimensions:

1.6L (Liana)

  • 2001–2004
  • compression ratio: 9.7:1
  • Maximum output: 76 kW (103 PS) at 5,500 rpm
  • Maximum torque: 144 N⋅m (106 lb⋅ft) at 4000 rpm

1.6L

  • 2004–2007
  • compression ratio:10.5:1
  • Maximum output: 79 kW (107 PS) at 5,500 rpm
  • Maximum torque: 144 N⋅m (106 lb⋅ft) at 4000 rpm

1.6L VVT

  • compression ratio: 10.5 - 11.1:1
  • Maximum output: 75–79 kW (102–107 PS) at 5,600 rpm
  • Maximum torque: 145–156 N⋅m (107–115 lb⋅ft) at 4400 rpm

1.6 M16A MPFI VVT (SX4 Hatchback 2WD/4WD - Europe)

  • Compression Ratio 11.0:1
  • 120 PS (88 kW) at 6000 rpm
  • 156 N⋅m (115 lb⋅ft) at 4400 rpm

1.6 M16A MPFI VVT (SX4 S-Cross 2wd or 4wd)

  • Compression Ratio 11.0:1
  • Maximum output: 100 kW (136 PS) at 6000 rpm
  • Maximum torque: 156 N⋅m (115 lb⋅ft) at 4400 rpm

1.6 M16A MPFI VVT (Swift Sport 2005-2011)

  • Compression Ratio 11.1:1
  • 125 PS (92 kW) at 6800 rpm, 148 N⋅m (109 lb⋅ft) at 4800 rpm

1.6 M16A MPFI VVT (Swift Sport 2011 - 2014)

  • Compression Ratio 11.1:1
  • 100 kW (136 PS) at 6900 rpm, 160 N⋅m (118 lb⋅ft) at 4400 rpm
  • Redline: 7200 rpm

1.6 M16A (fourth generation Vitara 2015+)

  • Compression ratio 11.0:1
  • Max power: 120 PS (88 kW) at 6,000 rpm
  • Max torque: 156 N⋅m (115 lb⋅ft) at 4,400 rpm

Application:

M18A

[edit]

The M18A is based on the M16A, with a larger bore. It is the only M-series engine to use a different bore.[1] It displaces 1.8 L (1,796 cc); bore and stroke is 83 mm × 83 mm (3.27 in × 3.27 in). This engine has a variable valve timing valvetrain. With a 9.6:1 compression ratio, it produces 125 PS (92 kW) at 5,500 rpm and 170 N⋅m (125 lb⋅ft) at 4,200 rpm.

Due to the engine block being based on the same casting, a M16A cylinder head can be bolted onto a M18a shortblock with minor modifications. This has been done by tuners, by installing a M18A block with the stock internals (crank, pistons and rods) in a Suzuki Swift Sport, in order to have more torque on the whole rev band.

Application:

References

[edit]
  1. ^ a b "内燃機関超基礎講座 | スイフトスポーツのテンロクエンジン:スズキ[M series]" [Internal combustion engine super basic course: Swift Sport 1.6 engine: Suzuki [M series]]. Motor-Fan (in Japanese). 2021-04-18. Archived from the original on 2021-09-23.