Jump to content

Vibration of plates

From Wikipedia, the free encyclopedia
(Redirected from Vibrating plate)
Vibration mode of a clamped square plate

The vibration of plates is a special case of the more general problem of mechanical vibrations. The equations governing the motion of plates are simpler than those for general three-dimensional objects because one of the dimensions of a plate is much smaller than the other two. This permits a two-dimensional plate theory to give an excellent approximation to the actual three-dimensional motion of a plate-like object.[1]

There are several theories that have been developed to describe the motion of plates. The most commonly used are the Kirchhoff-Love theory[2] and the Uflyand-Mindlin.[3][4] The latter theory is discussed in detail by Elishakoff.[5] Solutions to the governing equations predicted by these theories can give us insight into the behavior of plate-like objects both under free and forced conditions. This includes the propagation of waves and the study of standing waves and vibration modes in plates. The topic of plate vibrations is treated in books by Leissa,[6][7] Gontkevich,[8] Rao,[9] Soedel,[10] Yu,[11] Gorman[12][13] and Rao.[14]

Kirchhoff-Love plates

[edit]

The governing equations for the dynamics of a Kirchhoff-Love plate are

where are the in-plane displacements of the mid-surface of the plate, is the transverse (out-of-plane) displacement of the mid-surface of the plate, is an applied transverse load pointing to (upwards), and the resultant forces and moments are defined as

Note that the thickness of the plate is and that the resultants are defined as weighted averages of the in-plane stresses . The derivatives in the governing equations are defined as

where the Latin indices go from 1 to 3 while the Greek indices go from 1 to 2. Summation over repeated indices is implied. The coordinates is out-of-plane while the coordinates and are in plane. For a uniformly thick plate of thickness and homogeneous mass density

Isotropic Kirchhoff–Love plates

[edit]

For an isotropic and homogeneous plate, the stress-strain relations are

where are the in-plane strains and is the Poisson's ratio of the material. The strain-displacement relations for Kirchhoff-Love plates are

Therefore, the resultant moments corresponding to these stresses are

If we ignore the in-plane displacements , the governing equations reduce to

where is the bending stiffness of the plate. For a uniform plate of thickness ,

The above equation can also be written in an alternative notation:

In solid mechanics, a plate is often modeled as a two-dimensional elastic body whose potential energy depends on how it is bent from a planar configuration, rather than how it is stretched (which is the instead the case for a membrane such as a drumhead). In such situations, a vibrating plate can be modeled in a manner analogous to a vibrating drum. However, the resulting partial differential equation for the vertical displacement w of a plate from its equilibrium position is fourth order, involving the square of the Laplacian of w, rather than second order, and its qualitative behavior is fundamentally different from that of the circular membrane drum.

Free vibrations of isotropic plates

[edit]

For free vibrations, the external force q is zero, and the governing equation of an isotropic plate reduces to

or

This relation can be derived in an alternative manner by considering the curvature of the plate.[15] The potential energy density of a plate depends how the plate is deformed, and so on the mean curvature and Gaussian curvature of the plate. For small deformations, the mean curvature is expressed in terms of w, the vertical displacement of the plate from kinetic equilibrium, as Δw, the Laplacian of w, and the Gaussian curvature is the Monge–Ampère operator wxxwyyw2
xy
. The total potential energy of a plate Ω therefore has the form

apart from an overall inessential normalization constant. Here μ is a constant depending on the properties of the material.

The kinetic energy is given by an integral of the form

Hamilton's principle asserts that w is a stationary point with respect to variations of the total energy T+U. The resulting partial differential equation is

Circular plates

[edit]

For freely vibrating circular plates, , and the Laplacian in cylindrical coordinates has the form

Therefore, the governing equation for free vibrations of a circular plate of thickness is

Expanded out,

To solve this equation we use the idea of separation of variables and assume a solution of the form

Plugging this assumed solution into the governing equation gives us

where is a constant and . The solution of the right hand equation is

The left hand side equation can be written as

where . The general solution of this eigenvalue problem that is appropriate for plates has the form

where is the order 0 Bessel function of the first kind and is the order 0 modified Bessel function of the first kind. The constants and are determined from the boundary conditions. For a plate of radius with a clamped circumference, the boundary conditions are

From these boundary conditions we find that

We can solve this equation for (and there are an infinite number of roots) and from that find the modal frequencies . We can also express the displacement in the form

For a given frequency the first term inside the sum in the above equation gives the mode shape. We can find the value of using the appropriate boundary condition at and the coefficients and from the initial conditions by taking advantage of the orthogonality of Fourier components.

Rectangular plates

[edit]
A vibration mode of a rectangular plate.

Consider a rectangular plate which has dimensions in the -plane and thickness in the -direction. We seek to find the free vibration modes of the plate.

Assume a displacement field of the form

Then,

and

Plugging these into the governing equation gives

where is a constant because the left hand side is independent of while the right hand side is independent of . From the right hand side, we then have

From the left hand side,

where

Since the above equation is a biharmonic eigenvalue problem, we look for Fourier expansion solutions of the form

We can check and see that this solution satisfies the boundary conditions for a freely vibrating rectangular plate with simply supported edges:

Plugging the solution into the biharmonic equation gives us

Comparison with the previous expression for indicates that we can have an infinite number of solutions with

Therefore the general solution for the plate equation is

To find the values of and we use initial conditions and the orthogonality of Fourier components. For example, if

we get,

References

[edit]
  1. ^ Reddy, J. N., 2007, Theory and analysis of elastic plates and shells, CRC Press, Taylor and Francis.
  2. ^ A. E. H. Love, On the small free vibrations and deformations of elastic shells, Philosophical trans. of the Royal Society (London), 1888, Vol. série A, N° 17 p. 491–549.
  3. ^ Uflyand, Ya. S.,1948, Wave Propagation by Transverse Vibrations of Beams and Plates, PMM: Journal of Applied Mathematics and Mechanics, Vol. 12,pp. 287-300 (in Russian)
  4. ^ Mindlin, R.D. 1951, Influence of rotatory inertia and shear on flexural motions of isotropic, elastic plates, ASME Journal of Applied Mechanics, Vol. 18 pp. 31–38
  5. ^ Elishakoff ,I.,2020, Handbook on Timoshenko-Ehrenfest Beam and Uflyand-Mindlin Plate Theories, World Scientific, Singapore, ISBN 978-981-3236-51-6
  6. ^ Leissa, A.W.,1969, Vibration of Plates, NASA SP-160, Washington, D.C.: U.S. Government Printing Office
  7. ^ Leissa, A.W. and Qatu, M.S.,2011, Vibration of Continuous Systems, New York: Mc Graw-Hill
  8. ^ Gontkevich, V. S., 1964, Natural Vibrations of Plates and Shells, Kiev: “Naukova Dumka” Publishers, 1964 (in Russian); (English Translation: Lockheed Missiles & Space Co., Sunnyvale, CA)
  9. ^ Rao, S.S., Vibration of Continuous Systems, New York: Wiley
  10. ^ Soedel, W.,1993, Vibrations of Shells and Plates, New York: Marcel Dekker Inc., (second edition)
  11. ^ Yu, Y.Y.,1996, Vibrations of Elastic Plates, New York: Springer
  12. ^ Gorman, D.,1982, Free Vibration Analysis of Rectangular Plates, Amsterdam: Elsevier
  13. ^ Gorman, D.J.,1999, Vibration Analysis of Plates by Superposition Method, Singapore: World Scientific
  14. ^ Rao, J.S.,1999, Dynamics of Plates, New Delhi: Narosa Publishing House
  15. ^ Courant, Richard; Hilbert, David (1953), Methods of mathematical physics. Vol. I, Interscience Publishers, Inc., New York, N.Y., MR 0065391

See also

[edit]