Jump to content

Bell 400 TwinRanger

From Wikipedia, the free encyclopedia
Bell 400 TwinRanger
Bell 440
A Bell 400 prototype
General information
TypeMultipurpose utility helicopter
National originUnited States
ManufacturerBell Helicopter
StatusCanceled
Number built7[citation needed]
History
First flight4 April 1984
Developed fromBell 206L LongRanger

The Bell 400 TwinRanger was a prototype four-bladed, twin-engine civil helicopter developed by Bell Helicopter in the 1980s. Both the TwinRanger and another planned version, the Bell 440, were attempts to market a twin-engine development of the Model 206L LongRanger. The Bell 400A was a planned single-engine version of the 400. TwinRanger, however development was canceled when Bell could not acquire enough orders for production. The TwinRanger name was later used for a twin-engine version of the LongRanger produced from 1994 to 1997.

Development

[edit]

Bell has tried several incarnations of a twin-engine version of its successful Bell 206 series. The TwinRanger name dates back to the mid-1980s when Bell first considered developing a twin-engine version of the LongRanger.

The Bell 400 TwinRanger featured a reprofiled fuselage, two Allison 250 turboshafts, the OH-58D Kiowa's four-bladed main rotor, and a new shrouded tail rotor.[1] Bell also planned the single-engine 400A, and the 440 twin with a larger fuselage made possible by a high degree of composites.[2] The Bell 400 first flew on April 4, 1984. Bell suspended development of the 400/440 family in the late 1980s as it felt unable to achieve a profitable production rate of 120 units a year.[1]

Successors

[edit]

After the success of Tridair's Gemini ST twin-engine conversions of the 206L in the early 1990s, Bell produced the equivalent Bell 206LT TwinRanger based on the 206L-4. Only 13 206LTs were built between 1994 and 1997. The 206LT was replaced in Bell's lineup by the Bell 427, a mostly-new development of the Bell 407, itself a four-bladed single-engine derivative of the 206L.[1]

Variants

[edit]
Bell 400
Bell 400A
Projected model to be powered by one PW209T turboshaft of 937 shp (699 kW).[2]
Bell 440

Specifications (Bell 400)

[edit]

Data from The Illustrated Encyclopedia of Helicopters[2]

General characteristics

  • Crew: 1
  • Capacity: 5 passengers
  • Empty weight: 3,075 lb (1,395 kg)
  • Max takeoff weight: 5,500 lb (2,495 kg)
  • Powerplant: 2 × Allison 250-C20P turboshaft, 420 shp (310 kW) each
  • Main rotor diameter: 35 ft 0 in (10.67 m)
  • Main rotor area: 962 sq ft (89.4 m2)

Performance

  • Maximum speed: 172 mph (277 km/h, 149 kn)
  • Cruise speed: 161 mph (259 km/h, 140 kn)
  • Range: 450 mi (730 km, 390 nmi)
  • Service ceiling: 10,000 ft (3,000 m)
  • Rate of climb: 2,000 ft/min (10 m/s)

See also

[edit]

Related development

References

[edit]
  1. ^ a b c Frawley, Gerard: The International Directiory of Civil Aircraft, 2003-2004, page 43. Aerospace Publications Pty Ltd, 2003. ISBN 1-875671-58-7
  2. ^ a b c Apostolo, Giorgio; Elfan ap Rees (1984). The Illustrated Encyclopedia of Helicopters. New York, NY, USA: Bonanza Books. pp. 50. ISBN 0-517-43935-2.
[edit]