Cyclone Stan (2016)

From Wikipedia, the free encyclopedia

Tropical Cyclone Stan
Cyclone Stan approaching Pilbara at peak intensity on 30 January 2016
Meteorological history
Formed27 January 2016
Remnant low31 January 2016
Dissipated31 January 2016
Category 2 tropical cyclone
10-minute sustained (Aus)
Highest winds100 km/h (65 mph)
Lowest pressure980 hPa (mbar); 28.94 inHg
Category 1-equivalent tropical cyclone
1-minute sustained (SSHWS)
Highest winds120 km/h (75 mph)
Lowest pressure980 hPa (mbar); 28.94 inHg
Overall effects
FatalitiesNone
DamageMinor
Areas affectedWestern Australia, South Australia Australia

Part of the 2015–16 Australian region cyclone season

Tropical Cyclone Stan was a strong tropical cyclone that caused minor damage across the Pilbara region of Western Australia, and caused severe flooding in Southern Australia. The third tropical low, and the first named storm, Stan formed from a weak tropical low 750 km (465 mi) to the north of Port Hedland. Stan rapidly intensified as it was located in a favorable environment. It later peaked as a category-2 cyclone, with winds of nearly 75 mph (120 km/h). Stan later made landfall in the Pilbara region, and turned into a remnant low. It later dissipated over Southern Australia.

Meteorological history[edit]

Map plotting the storm's track and intensity, according to the Saffir–Simpson scale
Map key
  Tropical depression (≤38 mph, ≤62 km/h)
  Tropical storm (39–73 mph, 63–118 km/h)
  Category 1 (74–95 mph, 119–153 km/h)
  Category 2 (96–110 mph, 154–177 km/h)
  Category 3 (111–129 mph, 178–208 km/h)
  Category 4 (130–156 mph, 209–251 km/h)
  Category 5 (≥157 mph, ≥252 km/h)
  Unknown
Storm type
triangle Extratropical cyclone, remnant low, tropical disturbance, or monsoon depression

On 27 January, the BoM reported that Tropical Low 08U had developed about 750 km (465 mi) to the north of Port Hedland.[1] The system was located within a favorable environment for further development and was forecast to develop into a tropical cyclone over the next couple of days, as it moved southwards towards the coast of Western Australia. 08U was subsequently declared a Category 1 tropical cyclone on 29 January and was named Stan by the BoM. Stan continued to intensify during the day as it slowly moved in a southeast direction towards the east Pilbara coast. Stan reached category 2 tropical cyclone strength at 8:00 pm AWST time, when it was located 280 km north of Port Hedland. Stan maintained category 2 strength during the course of 30 January. Category 1 strength hurricane-force winds formed around 9:30 am AWST the same day, near Rowley Shoales where Stan was 100 km south of the island. Stan crossed the east Pilbara coast between Port Hedland and Wallal as a strong category 2 tropical cyclone at 2:00 am AWST. Stan proceeded to weaken while moving inland, becoming a category 1 tropical cyclone at 8:00 am the same day, and further weakened to become a tropical low at 2:00 pm that afternoon.[2] It later dissipated the same day.[3]

Preparations and impact[edit]

Western Australia[edit]

The Bureau of Meteorology (BoM) issued a Yellow alert for coastal communities between Pardoo and Mardie Station, which included the cities of Port Hedland, South Hedland, and Karratha, while a blue alert was put in place for areas between Bidyadanga to Pardoo, and between Mardie Station to Pannawonica. The ports of Port Hedland and Dampier were closed.[4] Storm surge warnings were issued for coastal areas between Wallal and Whim Creek,[5] while flood warnings were also issued.[6]

Intense rainfall ranging from 100-125 mm hit coasts of Pilbara. Two men were trapped in their cars due to rising waters in Paraburdoo.[7] Wind gusts as high as 80 mph (130 km/h) hit the community of Rowley Shoals. Roads and highways in the region were closed and were damaged by the flooding. Many trees and power lines were felled by the strong winds.[8] Some homes in the landfall site had damaged roofs.[9]

Southern Australia[edit]

The remnants of Stan caused record-breaking rain in South Australia. Coffin Bay received 75.8mm of rain, the Nullarbor Plain received 62.4mm, and Port Lincoln received 49.6mm of rainfall.[2] The city was affected by intense flooding, while unusually high rainfall hit Adelaide.[10]

See also[edit]

References[edit]

  1. ^ https://www.webcitation.org/6eqpVtLua?url=http://gwydir.demon.co.uk/advisories/IDW10800_201601270703.htm [dead link]
  2. ^ a b "Heavy rain in Adelaide causes courts to flood, traffic chaos".
  3. ^ "The first Tropical Cyclone for the 2015-16 season; Tropical Cyclone Stan crossed the coast of Western Australia as a category 2 cyclone".
  4. ^ "WA cyclone: Alerts issued for Pilbara and Kimberley as Stan moves towards coast".
  5. ^ "Tropical Cyclone "Stan" to hit Western Australia with destructive winds and heavy rainfall".
  6. ^ "Western Australia is braced for Storm Stan".
  7. ^ "Cyclone Stan brings flooding, wind gusts to the Pilbara".
  8. ^ "Cyclone Stan 'a fizzer'".
  9. ^ "Cyclone Stan makes landfall as wild weather continues across the country".
  10. ^ "PHOTOS: A cyclone which started in WA made it to Port Lincoln, 3200km away".