Draft:Shooting Star (spacecraft)

From Wikipedia, the free encyclopedia
  • Comment: No relevant improvement. Most of this is based on what those affiliated say which is not independent. Also, a lot is speculation and I note it still says the launch will occur in 2023 which seems unlikely at this point. If this is resubmitted again without substantial relevant improvements, the draft may be rejected meaning it will no longer be considered. S0091 (talk) 18:17, 2 December 2023 (UTC)
  • Comment: It looks like a significant portion of this draft has been copied or closely paraphrased from several different sources (see the copyvio report). Some sections will need to either be removed or rewritten. — Ingenuity (talk • contribs) 01:02, 28 October 2022 (UTC)
  • Comment: Two copies of this page have been created, in draft space and in article space. It is not necessary to create two copies of the same page, and it annoys the reviewers. This is sometimes done in order to bypass Articles for Creation review. However, if a submitter is ready to have the article in article space, it can be moved into article space, rather than creating a copy. It is common for a page that has been duplicated in draft space and in article space to be nominated for deletion or proposed for deletion.
    If the article is kept, this draft should be redirected to the article. If the article is deleted, this draft may be kept for future improvement.
    Does the author of this draft have any sort of financial or other connection with the subject of this draft? Please read the conflict of interest policy and the paid editing policy and make any required disclosures.
    You may ask for advice about conflict of interest at the Teahouse.
    If this draft is resubmitted without addressing the question about conflict of interest, it may be Rejected or nominated for deletion. Robert McClenon (talk) 15:23, 7 April 2021 (UTC)

Shooting Star
Scale model of the Dream Chaser Cargo System with the Shooting Star module
ManufacturerSierra Nevada Corporation
Country of originUnited States
OperatorNASA
ApplicationsISS resupply
Specifications
Spacecraft typeUncrewed cargo vehicle[1]
Launch mass6,500 kg (14,300 lb)
Payload capacity4,536 kg (10,000 lb)[2]
Crew capacity0
Dimensions
Length15 ft (4.6 m)
Production
StatusDevelopment
On order6
Built1
Launched0
Maiden launch2023
Related spacecraft
Flown withDream Chaser

The Shooting Star is a planned expendable Thales Alenia Space-built service module currently under development for Sierra Nevada Corporation's Dream Chaser Cargo System. It will be mated to the aft of Dream Chaser spaceplane and can carry 4,536 kg (10,000 lb) of supplies, cargo and experiments to the ISS.[2]

It will be launched for the first time into space via ULA's Vulcan Centaur V24L rocket in April 2024 with Dream Chaser Tenacity on SNC Demo-1 mission.[3]

Description[edit]

Shooting Star is derived from the word Shooting star, owing to its fiercy reentry after separation from Dream Chaser back to Earth. It houses all the thrusters required by Dream Chaser to reach and return from the space station. It can carry unpressurized cargo weighing up to 1,500 kg (3,300 lb). Once the module is in close proximity to the station, the Canadarm2 will capture the composite spacecraft via FRGF Grapple fixture on this module to berth the spacecraft via the Common Berthing Mechanism at the rear of this module to the ISS. This same arm will offload the unpressurized cargo and install it outside the station.[2]

Development[edit]

After an unsuccessful bid by Sierra Nevada Corporation for Dream Chaser Space System for NASA’s Commercial Crew Program,[4] the company designed the Dream Chaser Cargo System for Commercial Resupply Services Program-2 in September 2014. They proposed a separate expendable service module called the Shooting Star, attached to Dream Chaser. This service module will provide more cargo supply and trash to be disposed off the station.

In January 2016, SNC's Dream Chaser was selected as for this ISS resupply program, alongside SpaceX's Cargo Dragon variant and the Northrop Grumman Innovation Systems (then Orbital ATK)'s Cygnus spacecraft. 6 missions were to be flown under this program by Dream Chaser through 2024.[5]. NASA officials stated that adding a third company rather than two, for more options and redundancy in case of failure or scheduled delay.[6] The Shooting Star was announced by SNC around 2019.[7] Currently it is planned to have 6 Shooting Stars for each Dream Chaser Cargo System missions to ISS with more being counted in the near future.

Design[edit]

NASA’s Commerial Resupply Services contract heavilly influenced the Shooting Star concept, when mated to the Dream Chaser spaceplane. In addition to delivering pressurized and unpressurized cargo, the Shooting Star will serve as the service module for Dream Chaser.[3] ULA’s Vulcan Centaur will launch Dream Chaser/Shooting Star within its 5.4 meter fairing. Shooting Star’s composite structure will be manufactured by Thales Alenia Space (formerly Advanced Composites) in San Diego, California.[8] During CRS-2 missions, Dream Chaser will maneuver close to the International Space Station, where the Canadarm2 robotic arm will grapple the spacecraft and berth it to a Common Berthing Mechanism on the Harmony module in a similar fashion to other resupply vehicles. Unpressurized Cargo can also be transported to ISS via attachment to the exterior of the module.[9]

As part of the Dream Chaser Launch System, the Shooting Star will be mounted to the aft portion of the Dream Chaser spaceplane and will serve as the Service Module with these capabilities:[9]

  • 6 kW electrical power from solar panels and battery system.[9]
  • Active thermal control, or cooling services.[9]
  • Translation and rotation capability using six thrusters mounted on aft section.[9]
  • Three external mounting locations for unpressurized cargo. Each location can hold 500kg of cargo, or a single location can be used to carry 1,500 kg of cargo.[9]
  • Internally, the Shooting Star provides normal cabin environment for the space station crew after berthing. After all resupply cargo is unloaded, cargo for atmospheric disposal can be loaded.[9]

Space station crew will be able to access the Shooting Star module via the rear hatch, which will be berthed to the space station. They will then be able to pass through this spacecraft to access the hatch to the Dream Chaser spaceplane.[1]

Unmanned Orbital Outpost[edit]

SNC has proposed the usage of Shooting Star as an Unmanned Orbital Outpost initially established in low-Earth orbit to host payloads and support space assembly, microgravity experimentation, and logistics.[10] The Defense Innovation Unit, part of the United States Department of Defense, announced a contract with the company in 2020 for usage of Shooting Star for this purpose.[5] These Unmanned Orbital Outposts are proposed occupy different orbital altitudes such as medium Earth orbit, highly elliptical orbit, and cislunar orbit.

References[edit]

  1. ^ a b "SNC Shopting Star Transport Vehicle" (PDF). SNC. 1 October 2020. Retrieved 21 February 2021.
  2. ^ a b c Thompson, Amy (21 November 2019). "Sierra Nevada Unveils 'Shooting Star' Cargo Module for Dream Chaser Space Plane". Space.com. Retrieved 21 February 2021.
  3. ^ a b Kelly, Emre (1 April 2021). "Sierra Nevada, prepping for Florida launch and landing, unveils space station concept". Florida Today. Retrieved 5 April 2021.
  4. ^ Foust, Jeff (5 January 2015). "GAO Denies Sierra Nevada Protest of Commercial Crew Contract". SpaceNews. Archived from the original on 21 May 2019. Retrieved 21 May 2019. "Based on our review of the issues, we concluded that these arguments were not supported by the evaluation record or by the terms of the solicitation," Smith said in the GAO statement. Sierra Nevada, in a statement issued Jan. 5, accepted the decision by the GAO...
  5. ^ a b Evans, Ben (17 July 2020). "SNC Shooting Star Wins Contract for Unmanned Orbital Outpost". America Space. Retrieved 21 February 2021.
  6. ^ "Audit of the Commercial Resupply Services to the International Space Station" (PDF). NASA Office of Inspector General. 26 April 2018. Retrieved 21 February 2021.
  7. ^ Amy Thompson (2019-11-21). "Sierra Nevada Unveils 'Shooting Star' Cargo Module for Dream Chaser Space Plane". Space.com. Retrieved 2022-06-04.
  8. ^ Sheetz, Michael (11 October 2020). "Inside Sierra Nevada Corp's space plans, including the reusable 'Dream Chaser'". CNBC.com. Retrieved 21 February 2021.
  9. ^ a b c d e f g Amy Thompson (2019-11-21). "Sierra Nevada Unveils 'Shooting Star' Cargo Module for Dream Chaser Space Plane". Space.com. Retrieved 2024-02-10.
  10. ^ Trevithick, Joseph (15 July 2020). "The Pentagon Moves To Launch Its Own Experimental Mini Space Station". TheDrive. Retrieved 21 February 2021.

External links[edit]