Filippo Berto

Add links
From Wikipedia, the free encyclopedia
Filippo Berto
Berto in 19 July 2020
Born (1978-02-12) 12 February 1978 (age 46)
Vicenza, Italy
NationalityItalian
Alma materUniversity of Padua
University of Florence
AwardsOrder of the Star of Italy
Scientific career
FieldsFracture mechanics
Fatigue
Additive manufacturing
InstitutionsSapienza University of Rome
WebsiteFilippo Berto

Filippo Berto (born 12 February 1978) is an Italian professor and engineer, who works on fracture and fatigue mechanics at the Sapienza University of Rome. He is the vice president of the European Structural Integrity Society.

Berto received the Order of the Star of Italy in 2021 and multiple awards from the European Structural Integrity Society. Berto has held significant international positions, including a chair at the Norwegian University of Science and Technology and was a Distinguished Changjiang Chair Professor at Xi'an Jiaotong University from 2020 to 2023.

According to Scopus, in 2021, Berto published 179 articles, approximately an article every two days.[1] He is in the list of 2% top scientist released by Stanford University with 1,216 peer-reviewed articles and 26,341 citations, as of April 2024. Despite his contributions, in 2024, Berto's work has faced scrutiny for questionable practices, leading to retractions[2][3][4][5][6] and loss of editorial board positions.[7][8]

Biography[edit]

Filippo Berto was born 12 February 1978 in Vicenza, Italy.[9][10] In 2003, he obtained a degree in Industrial Engineering from the University of Padua. After that, he completed his Ph.D. in Mechanical Engineering at the University of Florence, in 2006.[citation needed]

He was professor of machine design at the University of Padua, Italy, between 2006 and 2015. Since 2022, Berto is a full professor and is a chair in the mechanics of materials at the Sapienza University of Rome.[11] Berto was an international chair in mechanics of materials, mechanical metallurgy, fracture mechanics, fatigue, and structural integrity at the Norwegian University of Science and Technology of Trondheim, Norway, from 2016 to 2022.[12]

Berto has been visiting professor at Stanford University where he has collaborated with the Nanoscale Prototyping Laboratory.[12] He is also holding some honorary chair professorship at Hong Kong Polytechnic University and Mandela Metropolitan University. In 2021, he was a Distinguished Changjiang Chair Professor at Xi'an Jiaotong University through the Changjiang Scholars Program from 2020 to 2023.[citation needed]

Berto is also collaborating with the Centre of Excellence of additive manufacturing established in Auburn and in particular with Nima Shamsaei and Mohsen Seifi who is chair of additive manufacturing programs in ASTM. Berto is also voting member of ASTM F42 on Additive Manufacturing Technologies and ASTM E08 on Metal Fatigue and Fracture.[citation needed] He is chairman of the technical committee European Structural Integrity Society (ESIS) TC15 on Structural Integrity of additive manufactured components of ESIS. From 2021 and 2022, Berto is vice-president of the ESIS.[13] He is also the vice president of the ESIS.[14]

Berto has a role in the Italian Group of Fracture being president since 2019 and co-editor-in-chief of the associated journal.[15] He is in the editorial board of several scientific journals in the area of fatigue, fracture and structural integrity, such as, Materials & Design,[16] Safety Science,[17] Materials Science and Engineering: A,[18] Advanced Engineering Materials,[19] Polymer Testing,[20] Strength of Materials,[21] among others.

As technical Chair of TC15 is also the founder of the series of European conferences on additive manufacturing ESIAM. He is also one of the founder of the ESIS TC18 on Structural Integrity of Welded Joints and treasurer of the same TC.[22]

Scholia has a profile for Filippo Berto (Q97574132).

Berto is in the list of 2% top scientist released by Stanford University.[23] In Europe, he is among the first twenty positions in the field of Mechanical Engineering and Transports and among the first 3 positions dealing with fracture and fatigue problems.[24] He is a top author in the last 5 years (2018–2022) in several topics such as (V-notches, Strain Energy Density, T-Stress) in Scopus,[25] where he is also among the first three top authors all-time in fatigue.[26][27]

Prizes and honours[edit]

Controversy[edit]

The work of Berto has come under scrutiny for a range of questionable practices including: suspected self-plagiarism, authorship fraud, citation fraud, and misrepresentation of data.[37][38] This has so far resulted in the retraction of the following papers:

  1. Razavi, S. M. J.; Ferro, P.; Berto, Filippo (September 2017). "RETRACTED ARTICLE: Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting". Strength of Materials. 49 (5): 738. doi:10.1007/s11223-017-9884-2. ISSN 1573-9325. Retraction due to duplicate publication.[39][40]
  2. Mohammadi, H.; Salavati, H.; Alizadeh, Y.; Abdullah, A.; Berto, Filippo (December 2017). "Retracted: Fracture investigation of U-notch made of tungsten–copper functionally graded materials by means of strain energy density". Fatigue & Fracture of Engineering Materials & Structures. 40 (12): 1984–1993. doi:10.1111/ffe.12616. ISSN 8756-758X. Retraction due to self-plagiarism.[41]
  3. Masoudi Nejad, Reza; Liu, Zhiliang; Ma, Wenchen; Berto, Filippo (November 2021). "RETRACTED: Reliability analysis of fatigue crack growth for rail steel under variable amplitude service loading conditions and wear". International Journal of Fatigue. 152: 106450. doi:10.1016/j.ijfatigue.2021.106450. hdl:11573/1654519. ISSN 0142-1123. Retraction due to self-plagiarism.[42]
  4. Hashemi, Sina Abbaszadeh; Farhangdoost, Khalil; Ma, Wenchen; Moghadam, Danial Ghahremani; Nejad, Reza Masoudi; Berto, Filippo (December 2022). "RETRACTED: Effects of tensile overload on fatigue crack growth in AM60 magnesium alloys". Theoretical and Applied Fracture Mechanics. 122: 103573. doi:10.1016/j.tafmec.2022.103573. ISSN 0167-8442. Retraction due to authorship-fraud, citation-fraud, and image duplication.[5]
  5. Masoudi Nejad, Reza; Berto, Filippo; Tohidi, Mohammadreza; Jalayerian Darbandi, Ahmad; Sina, Nima (August 2021). "RETRACTED: An investigation on fatigue behavior of AA2024 aluminum alloy sheets in fuselage lap joints". Engineering Failure Analysis. 126: 105457. doi:10.1016/j.engfailanal.2021.105457. ISSN 1350-6307. Retraction due to duplication of text and methodology, " salami slicing" of research results.[6]

In March 2024, Berto lost his position on the editorial board of Theoretical and Applied Fracture Mechanics, coinciding with that journal's retraction of paper 4 above.[7][43] At around the same time, Berto also lost his editorial board positions at two further Elsevier journals: Engineering Failure Analysis and International Journal of Fatigue.[8]

References[edit]

  1. ^ "Scopus preview - Berto, Filippo - Author details - Scopus". www.scopus.com. Retrieved 2024-02-20.
  2. ^ "Retraction: Fracture investigation of U-notch made of tungsten–copper functionally graded materials by means of strain energy density, H. Mohammadi, H. Salavati, Y. Alizadeh, A. Abdullah, F. Berto, Fatigue and Fracture of Engineering Materials and Structures, Volume 40, issue 12, pp. 1984–1993". Fatigue & Fracture of Engineering Materials & Structures. 45 (7): 2139. July 2022. doi:10.1111/ffe.13692. ISSN 8756-758X.
  3. ^ Razavi, S. M. J.; Ferro, P.; Berto, F. (2017-09-01). "RETRACTED ARTICLE: Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting". Strength of Materials. 49 (5): 738. doi:10.1007/s11223-017-9884-2. ISSN 1573-9325.
  4. ^ Masoudi Nejad, Reza; Liu, Zhiliang; Ma, Wenchen; Berto, Filippo (November 2021). "RETRACTED: Reliability analysis of fatigue crack growth for rail steel under variable amplitude service loading conditions and wear". International Journal of Fatigue. 152: 106450. doi:10.1016/j.ijfatigue.2021.106450. hdl:11573/1654519. ISSN 0142-1123.
  5. ^ a b Hashemi, Sina Abbaszadeh; Farhangdoost, Khalil; Ma, Wenchen; Moghadam, Danial Ghahremani; Nejad, Reza Masoudi; Berto, Filippo (December 2022). "RETRACTED: Effects of tensile overload on fatigue crack growth in AM60 magnesium alloys". Theoretical and Applied Fracture Mechanics. 122: 103573. doi:10.1016/j.tafmec.2022.103573. ISSN 0167-8442.
  6. ^ a b Masoudi Nejad, Reza; Berto, Filippo; Tohidi, Mohammadreza; Jalayerian Darbandi, Ahmad; Sina, Nima (2021-08-01). "RETRACTED: An investigation on fatigue behavior of AA2024 aluminum alloy sheets in fuselage lap joints". Engineering Failure Analysis. 126: 105457. doi:10.1016/j.engfailanal.2021.105457. ISSN 1350-6307.
  7. ^ a b Hashemi, Sina Abbaszadeh; Farhangdoost, Khalil; Ma, Wenchen; Moghadam, Danial Ghahremani; Nejad, Reza Masoudi; Berto, Filippo (December 2022). "Lost editorial board position". Retrieved 2024-03-23.
  8. ^ a b Nejad, Reza Masoudi; Liu, Zhiliang; Ma, Wenchen; Berto, Filippo (November 2021). "removal from Int J Fatigue editorial board". Retrieved 23 March 2024.
  9. ^ "Filippo Berto | Frattura ed Integrità Strutturale". www.fracturae.com. Retrieved 2024-03-24.
  10. ^ "Filippo Berto - Top Italian Scientist in Engineering". topitalianscientists.org. Retrieved 2024-03-24.
  11. ^ "Sapienza University of Rome". www.dicma.ing.uniroma1.it. Retrieved 2023-06-04.
  12. ^ a b "Timoshenko Scholars | Mechanics and Computation". mechanics.stanford.edu. Retrieved 2024-03-24.
  13. ^ "ESIS". www.structuralintegrity.eu. Retrieved 2023-06-04.
  14. ^ wp_1437532. "Executive committee". ESIS (in Italian). Retrieved 2024-04-20.{{cite web}}: CS1 maint: numeric names: authors list (link)
  15. ^ "Italian Group of Fracture". www.gruppofrattura.eu. Retrieved 2020-08-02.
  16. ^ "Materials & Design". www.journals.elsevier.com. Retrieved 2020-07-19.
  17. ^ "Safety Science". www.journals.elsevier.com. Retrieved 2020-07-19.
  18. ^ "Materials Science and Engineering: A". www.journals.elsevier.com. Retrieved 2020-07-19.
  19. ^ "Advanced Engineering Materials". www.onlinelibrary.wiley.com. Retrieved 2020-07-19.
  20. ^ "Polymer Testing". www.journals.elsevier.com. Retrieved 2020-07-19.
  21. ^ "Strength of Materials". www.springer.com. Retrieved 2020-07-19.
  22. ^ "ESIS". sites.google.com. Retrieved 2020-12-04.
  23. ^ Baas, Jeroen (2023). "2023 Stanford's list of World Top 2% scientists". www.elsevier.digitalcommonsdata.com. 6. doi:10.17632/btchxktzyw.6. Retrieved 2023-11-04.
  24. ^ Baas, Jeroen (2023). "2023 Stanford's list of World Top 2% scientists". www.elsevier.digitalcommonsdata.com. 6. doi:10.17632/btchxktzyw.6. Retrieved 2023-11-04.
  25. ^ "SCOPUS". www.scopus.com. Retrieved 2023-11-04.
  26. ^ "SCOPUS". www.scopus.com. Retrieved 2023-11-04.
  27. ^ "SCOPUS". www.scopus.com. Retrieved 2023-11-04.
  28. ^ "ESIS". www.structuralintegrity.eu. Archived from the original on 2023-06-04. Retrieved 2023-06-04.
  29. ^ "President of the Republic - Italy". www.quirinale.it. Retrieved 2023-06-04.
  30. ^ "ESIS TC12". www.sites.google.com/structuralintegrity.eu/tc12. Retrieved 2023-06-04.
  31. ^ "Wohler Medal". www.vecf1.eu. Retrieved 2020-07-19.
  32. ^ "Springer Science+Business Media". www.springer.com. Retrieved 2020-12-04.
  33. ^ "Paolo Lazzarin IGF Medal". www.gruppofrattura.eu. Retrieved 2020-07-19.
  34. ^ "Award of Merit". www.structuralintegrity.eu. Retrieved 2020-07-19.
  35. ^ "Timoshenko Fellow". www.mechanics.stanford.edu. Retrieved 2020-07-19.
  36. ^ "AIAS Award". www.aiasnet.it. Retrieved 2020-07-19.
  37. ^ "PubPeer record". www.pubpeer.com. Retrieved 2024-03-23.
  38. ^ Nejad, Reza Masoudi; Berto, Filippo; Tohidi, Mohammadreza; Jalayerian Darbandi, Ahmad; Sina, Nima (April 2024). "Expression of concern "An investigation on fatigue behavior of AA2024 aluminum alloy sheets in fuselage lap joints" [Eng. Fail. Anal. 126 (2021) 105457]". Engineering Failure Analysis. 158: 108068. doi:10.1016/j.engfailanal.2024.108068. ISSN 1350-6307.
  39. ^ Razavi, S. M. J.; Ferro, P.; Berto, F. (2017-09-01). "RETRACTED ARTICLE: Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting". Strength of Materials. 49 (5): 738. doi:10.1007/s11223-017-9884-2. ISSN 1573-9325.
  40. ^ Razavi, Seyed-Mohammad-Javad; Ferro, Paolo; Berto, Filippo (August 2017). "Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting". Metals. 7 (8): 291. doi:10.3390/met7080291. hdl:11573/1688368. ISSN 2075-4701.
  41. ^ "Retraction: Fracture investigation of U-notch made of tungsten–copper functionally graded materials by means of strain energy density, H. Mohammadi, H. Salavati, Y. Alizadeh, A. Abdullah, F. Berto, Fatigue and Fracture of Engineering Materials and Structures, Volume 40, issue 12, pp. 1984–1993". Fatigue & Fracture of Engineering Materials & Structures. 45 (7): 2139. July 2022. doi:10.1111/ffe.13692. ISSN 8756-758X.
  42. ^ Nejad, Reza Masoudi; Liu, Zhiliang; Ma, Wenchen; Berto, Filippo (2024-06-01). "Retraction notice to "Reliability analysis of fatigue crack growth for rail steel under variable amplitude service loading conditions and wear" [Int. J. Fatigue 152 (2021) 106450]". International Journal of Fatigue. 183: 108252. doi:10.1016/j.ijfatigue.2024.108252. ISSN 0142-1123.
  43. ^ "Current editorial board". Retrieved 2024-03-23.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Filippo_Berto&oldid=1221490169"