Jump to content

Reynolds stress equation model

From Wikipedia, the free encyclopedia

Reynolds stress equation model (RSM), also referred to as second moment closures are the most complete classical turbulence model. In these models, the eddy-viscosity hypothesis is avoided and the individual components of the Reynolds stress tensor are directly computed. These models use the exact Reynolds stress transport equation for their formulation. They account for the directional effects of the Reynolds stresses and the complex interactions in turbulent flows. Reynolds stress models offer significantly better accuracy than eddy-viscosity based turbulence models, while being computationally cheaper than Direct Numerical Simulations (DNS) and Large Eddy Simulations.

Shortcomings of Eddy-viscosity based models

[edit]

Eddy-viscosity based models like the and the models have significant shortcomings in complex, real-life turbulent flows. For instance, in flows with streamline curvature, flow separation, flows with zones of re-circulating flow or flows influenced by mean rotational effects, the performance of these models is unsatisfactory.

Such one- and two-equation based closures cannot account for the return to isotropy of turbulence,[1] observed in decaying turbulent flows. Eddy-viscosity based models cannot replicate the behaviour of turbulent flows in the Rapid Distortion limit,[2] where the turbulent flow essentially behaves as an elastic medium (instead of viscous).

Reynolds Stress Transport Equation

[edit]

Reynolds Stress equation models rely on the Reynolds Stress Transport equation. The equation for the transport of kinematic Reynolds stress is [3]

Rate of change of + Transport of by convection = Transport of by diffusion + Rate of production of + Transport of due to turbulent pressure-strain interactions + Transport of due to rotation + Rate of dissipation of .

The six partial differential equations above represent six independent Reynolds stresses. While the Production term () is closed and does not require modelling, the other terms, like pressure strain correlation () and dissipation (), are unclosed and require closure models.

Production term

[edit]

The Production term that is used in CFD computations with Reynolds stress transport equations is

Physically, the Production term represents the action of the mean velocity gradients working against the Reynolds stresses. This accounts for the transfer of kinetic energy from the mean flow to the fluctuating velocity field. It is responsible for sustaining the turbulence in the flow through this transfer of energy from the large scale mean motions to the small scale fluctuating motions.

This is the only term that is closed in the Reynolds Stress Transport Equations. It requires no models for its direct evaluation. All other terms in the Reynolds Stress Transport Equations are unclosed and require closure models for their evaluation.

Rapid Pressure-Strain Correlation term

[edit]

The rapid pressure-strain correlation term redistributes energy among the Reynolds stresses components. This is dependent on the mean velocity gradient and rotation of the co-ordinate axes. Physically, this arises due to the interaction among the fluctuating velocity field and the mean velocity gradient field. The simplest linear form of the model expression is

Here is the Reynolds stress anisotropy tensor, is the rate of strain term for the mean velocity field and is the rate of rotation term for the mean velocity field. By convention, are the coefficients of the rapid pressure strain correlation model. There are many different models for the rapid pressure strain correlation term that are used in simulations. These include the Launder-Reece-Rodi model,[4] the Speziale-Sarkar-Gatski model,[5] the Hallback-Johanssen model,[6] the Mishra-Girimaji model,[7] besides others.

Slow Pressure-Strain Correlation term

[edit]

The slow pressure-strain correlation term redistributes energy among the Reynolds stresses. This is responsible for the return to isotropy of decaying turbulence where it redistributes energy to reduce the anisotropy in the Reynolds stresses. Physically, this term is due to the self-interactions amongst the fluctuating field. The model expression for this term is given as [8]

There are many different models for the slow pressure strain correlation term that are used in simulations. These include the Rotta model [9] , the Speziale-Sarkar model [10] , besides others.

Dissipation term

[edit]

The traditional modelling of the dissipation rate tensor assumes that the small dissipative eddies are isotropic. In this model the dissipation only affects the normal Reynolds stresses. [11]

or

where is dissipation rate of turbulent kinetic energy, when i = j and 0 when i ≠ j and is the dissipation rate anisostropy defined as .

However, as has been shown by e.g. Rogallo,[12] Schumann & Patterson,[13] Uberoi,[14][15] Lee & Reynolds[16] and Groth, Hallbäck & Johansson[17] there exist many situations where this simple model of the dissipation rate tensor is insufficient due to the fact that even the small dissipative eddies are anisotropic. To account for this anisotropy in the dissipation rate tensor Rotta[18] proposed a linear model relating the anisotropy of the dissipation rate stress tensor to the anisotropy of the stress tensor.

or

where .

The parameter is assumed to be a function the turbulent Reynolds number, the mean strain rate etc. Physical considerations imply that should tend to zero when the turbulent Reynolds number tends to infinity and to unity when the turbulent Reynolds number tends to zero. However, the strong realizability condition implies that should be identically equal to 1.

Based on extensive physical and numerical (DNS and EDQNM) experiments in combination with a strong adherence to fundamental physical and mathematical limitations and boundary conditions Groth, Hallbäck and Johansson proposed an improved model for the dissipation rate tensor.[19]

where is the second invariant of the tensor and is a parameter that, in principle, could depend on the turbulent Reynolds number, the mean strain rate parameter etc.

However, Groth, Hallbäck and Johansson used rapid distortion theory to evaluate the limiting value of which turns out to be 3/4.[20][21] Using this value the model was tested in DNS-simulations of four different homogeneous turbulent flows. Even though the parameters in the cubic dissipation rate model were fixed through the use of realizability and RDT prior to the comparisons with the DNS data the agreement between model and data was very good in all four cases.

The main difference between this model and the linear one is that each component of is influenced by the complete anisotropic state. The benefit of this cubic model is apparent from the case of an irrotational plane strain in which the streamwise component of is close to zero for moderate strain rates whereas the corresponding component of is not. Such a behaviour cannot be described by a linear model.[22]

Diffusion term

[edit]

The modelling of diffusion term is based on the assumption that the rate of transport of Reynolds stresses by diffusion is proportional to the gradients of Reynolds stresses. This is an application of the concept of the gradient diffusion hypothesis to modeling the effect of spatial redistribution of the Reynolds stresses due to the fluctuating velocity field. The simplest form of that is followed by commercial CFD codes is

where , and .

Rotational term

[edit]

The rotational term is given as [23]

here is the rotation vector, =1 if i,j,k are in cyclic order and are different,=-1 if i,j,k are in anti-cyclic order and are different and =0 in case any two indices are same.

Advantages of RSM

[edit]

1) Unlike the k-ε model which uses an isotropic eddy viscosity, RSM solves all components of the turbulent transport.
2) It is the most general of all turbulence models and works reasonably well for a large number of engineering flows.
3) It requires only the initial and/or boundary conditions to be supplied.
4) Since the production terms need not be modeled, it can selectively damp the stresses due to buoyancy, curvature effects etc.

See also

[edit]

See also

[edit]

References

[edit]
  1. ^ Lumley, John; Newman, Gary (1977). "The return to isotropy of homogeneous turbulence". Journal of Fluid Mechanics. 82: 161–178. Bibcode:1977JFM....82..161L. doi:10.1017/s0022112077000585. S2CID 39228898.
  2. ^ Mishra, Aashwin; Girimaji, Sharath (2013). "Intercomponent energy transfer in incompressible homogeneous turbulence: multi-point physics and amenability to one-point closures". Journal of Fluid Mechanics. 731: 639–681. Bibcode:2013JFM...731..639M. doi:10.1017/jfm.2013.343. S2CID 122537381.
  3. ^ Bengt Andersson, Ronnie Andersson s (2012). Computational Fluid Dynamics for Engineers (First ed.). Cambridge University Press, New York. p. 97. ISBN 9781107018952.
  4. ^ Launder, Brian Edward and Reece, G Jr and Rodi, W (1975). "Progress in the development of a Reynolds-stress turbulence closure". Journal of Fluid Mechanics. 68 (3): 537–566. Bibcode:1975JFM....68..537L. doi:10.1017/s0022112075001814. S2CID 14318348.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  5. ^ Speziale, Charles G and Sarkar, Sutanu and Gatski, Thomas B (1991). "Modelling the pressure--strain correlation of turbulence: an invariant dynamical systems approach". Journal of Fluid Mechanics. 227: 245–272. Bibcode:1991JFM...227..245S. doi:10.1017/s0022112091000101. S2CID 120810445.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  6. ^ Johansson, Arne V and Hallback, Magnus (1994). "Modelling of rapid pressure—strain in Reynolds-stress closures". Journal of Fluid Mechanics. 269: 143–168. Bibcode:1994JFM...269..143J. doi:10.1017/s0022112094001515. S2CID 120180201.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  7. ^ Mishra, Aashwin A and Girimaji, Sharath S (2017). "Toward approximating non-local dynamics in single-point pressure--strain correlation closures". Journal of Fluid Mechanics. 811: 168–188. Bibcode:2017JFM...811..168M. doi:10.1017/jfm.2016.730. S2CID 125249982.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  8. ^ Magnus Hallback (1996). Turbulence and Transition Modelling (First ed.). Kluwer Academic Publishers. p. 117. ISBN 978-0792340607.
  9. ^ Rotta, J (1951). "Statistical theory of nonhomogeneous turbulence. ii". Z. Phys. 131: 51–77. doi:10.1007/BF01329645. S2CID 123243529.
  10. ^ Sarkar, Sutanu and Speziale, Charles G (1990). "A simple nonlinear model for the return to isotropy in turbulence". Physics of Fluids A: Fluid Dynamics. 2 (1): 84–93. Bibcode:1990PhFlA...2...84S. doi:10.1063/1.857694. hdl:2060/19890011041. S2CID 120167112.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  11. ^ Peter S. Bernard & James M. Wallace (2002). Turbulent Flow: Analysis, Measurement & Prediction. John Wiley & Sons. p. 324. ISBN 978-0471332190.
  12. ^ Rogallo, R S (1981). "Numerical experiments in homogeneous turbulence". NASA Tm 81315. 81: 31508. Bibcode:1981STIN...8131508R.
  13. ^ Schumann, U & Patterson, G S (1978). "Numerical study of the return of axisymmetric turbulence to isotropy" (PDF). J. Fluid Mech. 88 (4): 711–735. Bibcode:1978JFM....88..711S. doi:10.1017/S0022112078002359. S2CID 124212093.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  14. ^ Uberoi, M S (1956). "Effect of wind-tunnel contraction on free-stream turbulence". Journal of the Aeronautical Sciences. 23 (8): 754–764. doi:10.2514/8.3651.
  15. ^ Uberoi, M S (1978). "Equipartition of energy and local isotropy in turbulent flows" (PDF). J. Appl. Phys. 28 (10): 1165–1170. doi:10.1063/1.1722600. hdl:2027.42/70587.
  16. ^ Lee, M J & Reynolds, W C (1985). "Numerical experiments on the structure of homogeneous turbulence". Thermosciences Div., Dept. Of Mech. Engineering, Stanford University, Rep. No. TF-24.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  17. ^ Groth, J, Hallbäck, M & Johansson, A V (1989). Measurement and modelling of anisotropic turbulent flows. Vol. Advances in Turbulence 2. Springer-Verlag Berlin Heidelberg. p. 84. doi:10.1007/978-3-642-83822-4. ISBN 978-3-642-83822-4.{{cite book}}: CS1 maint: multiple names: authors list (link)
  18. ^ Rotta, J C (1951). "Statistische Theorie nichthomogener Turbulenz I". Z. Phys. 129 (6): 547–572. Bibcode:1951ZPhy..129..547R. doi:10.1007/BF01330059. S2CID 186236083.
  19. ^ Hallbäck, M, Groth, J & Johansson, A V (1989). A Reynolds stress closure for the dissipation in anisotropic turbulent flows. Vol. Symposium on Turbulent Shear Flows, 7th, Stanford, CA, Aug. 21-23, 1989, Proceedings. Stanford University.{{cite book}}: CS1 maint: multiple names: authors list (link)
  20. ^ Hallbäck, M, Groth, J & Johansson, A V (1990). "An algebraic model for nonisotropic turbulent dissipation rate in Reynolds stress clousers". Phys. Fluids A. 2: 1859. doi:10.1063/1.857908.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  21. ^ Groth, J, Hallbäck, M & Johansson, A V (1990). A nonlinear model for the dissipation rate term in Reynolds stress models. Vol. Engineering Turbulence Modelling and Experiments: Proceedings of the International Symposium on Engineering Turbulence Modelling and Measurements. Elsevier. ISBN 978-0444015631.{{cite book}}: CS1 maint: multiple names: authors list (link)
  22. ^ Hallbäck, M, Groth, J & Johansson, A V (1991). Anisotropic Dissipation Rate - Implications for Reynolds Stress Models. Vol. Advances in Turbulence 3. Springer, Berlin, Heidelberg. p. 414. doi:10.1007/978-3-642-84399-0_45. ISBN 978-3-642-84401-0.{{cite book}}: CS1 maint: multiple names: authors list (link)
  23. ^ H.Versteeg & W.Malalasekera (2013). An Introduction to Computational Fluid Dynamics (Second ed.). Pearson Education Limited. p. 96. ISBN 9788131720486.

Bibliography

[edit]
  • "Turbulent Flows", S. B. Pope, Cambridge University Press (2000).
  • "Modelling Turbulence in Engineering and the Environment: Second-Moment Routes to Closure", Kemal Hanjalić and Brian Launder, Cambridge University Press (2011).