Jump to content

User:Ben79487/Copyedit Examples/B1

From Wikipedia, the free encyclopedia
This segment was copied from the article Ironworker's revision during 11:54 UTC, 27 December 2018.

An ironworker is the American term for a tradesman who works in the iron working industry. A structural/ornamental ironworker fabricates and erects (or even dismantles) the structural steel framework of pre-engineered metal buildings, single and multi-story buildings, stadiums, arenas, hospitals, towers, wind turbines, and bridges.[1] Ironworkers assemble the structural framework in accordance with engineered drawings.[2] Ironworkers also unload, place and tie reinforcing steel bars (rebar) as well as install post-tensioning systems, both of which give strength to the concrete used in piers, footings, slabs, buildings, and bridges. Ironworkers load, unload, place, and set machinery and equipment as well as operate power hoists, forklifts, and aerial lifts. They unload, place, and fasten metal decking, safety netting, and edge rails to facilitate safe working practices. Ironworkers finish buildings by erecting curtain wall and window wall systems, stairs and handrails, metal doors, and sheeting and elevator fronts. Ironworkers perform all types of industrial maintenance as well.[3]

Historically ironworkers mainly worked with wrought iron or cast iron, but today they utilize many different materials including ferrous and non-ferrous metals, plastics, glass, concrete, and composites.

References

  1. ^ Len F. Webster (1997), The Wiley Dictionary of Civil Engineering and Construction, Wiley-Interscience, ISBN 0471181153
  2. ^ They are also distinct from the term blacksmith which is someone who works with, shapes and tempers raw iron. Ironworkers are called “steel erectors" in Australia and New Zealand.[citation needed] Must be a qualified "Dogman" and "Rigger". Does not work with rebar as that is the "Steel Fixer's" job. A dogman or rigger may move the rebar bundles for the steel fixer. A steel fixer fixes steel only. M.Y.H. Bangash (2000), Structural Detailing in Steel, Thomas Telford, ISBN 0727728504
  3. ^ "Careers". www.ironworkers.org.