User:CarrotPieFI/sandbox/Ultimaker 2
< User:CarrotPieFI | sandbox
| Ultimaker 2 | |
|---|---|
 | |
| Manufacturer | Ultimaker |
| Family | Ultimaker 2 |
| Released | September 2013 |
| Discontinued | October 2021 |
| Filament diameter | 2.85mm |
| Supported materials | PLA |
| Specifications | |
| Size | 357×342×388mm |
| Build volume | 230×225×205mm |
| Dual extrusion | No |
| Heated build plate | Yes |
| Build plate temperature | 0-115°C |
| Nozzle diameter | 0.25mm, 0.4mm (fitted), 0.6mm, 0.8mm |
| Nozzle temperature | 0-260°C |
| Door | No |
| Software | |
| Prints from | SD card |
| Slicing software | Cura |
| File extension | .gcode |
| Gcode flavour | Ultimaker 2 |
The Ultimaker 2 is a 3D printer that was manufactured by the Dutch company Ultimaker. The printer was released in 2013 as the successor to the Ultimaker Original and quickly grew into a highly successful family of printers including the Ultimaker 2 Go and the Ultimaker 2 Extended. The family was later upgraded to include a redesigned feeder wheel and motor, easily swappable nozzles and a new nozzle heating system. The original Ultimaker 2 family will be discontinued by Ultimaker in October 2021.