User:MatthewUCSB/sandbox/Anti-Scratch Coating

From Wikipedia, the free encyclopedia

Anti-Scratch Coating is a type of protective coating applied to an object's surface for resistance against scratches. Scratches are small surface-level cuts left on a surface following interaction with a sharper object. Anti-Scratch coatings provide scratch resistances by containing tiny microscopic materials with scratch-resistant properties. Scratch resistance materials come in the form of additives,filters, and binders. Besides materials, scratch resistances is impacted by coating formation techniques. Scratch resistance is measured using the Scratch-hardness test. Commercially, Anti-Scratch Coatings are used in the automotive, optical, and Electronics industries, where resale and/or functionality is impaired by scratches. Anti-Scratch Coatings are of growing importance as traditional Scratch resistance materials like metals and glass are replaced with low-scratch resistant plastics.[1]

Applications[edit]

Automotive, Optical, and Electronics are major sectors of Anti-Scratch Coatings.

Automotive[edit]

Anti-scratch coatings in the Automotive industry maintain car's appearance and prevent damage of Car's anti-corrosion layer. The Anti-corrosion layer protects car metals from environmental harm. Automotive Anti-Scratch coatings are becoming stronger (from 10 newtons to 15 newtons of protection) to counter scratch resistance lost due to the industry shift from steel to lightweight, but low-scratch resistant plastics and aluminum. Currently, scratch-formation is decreased with a primer and clear coat. The Primer is made of polyolefin-resin, while the clear coat contains the additives siloxane and eruamide. [2][3]

Optical[edit]

Scratch-resistant coatings are added to Optical glasses due to scratches' extreme ability to impact a wearer's vision. Even when Optical glasses are made of high scratch-resistances glass, polycarbonate, or Cr-39, coatings are still used. Optical coatings include Diamond-like carbon (DLC) and anti-reflective-scratch hybrid coatings. Diamond-like Carbon is a coating that shares diamonds' extreme scratch resistance. Anti-reflective Scratch hybrid coatings contain scratch-resistant additives with Anti-reflective coating (coatings that decrease reflection)materials.[4][5]

Electronics[edit]

In the Electronics industry, scratches-resistances coatings are applied to electronic screens to prevent primary fingernails scratches. Screens are made of either polycarbonate (the highest Scratch-resistant plastic) or higher-end glass. Electronics Industry Anti-Scratch coatings often contain the anti-scratch additives siloxane, and the anti-Scratch filters TiO2(Titanium dioxide) and SiO2(silicon dioxide). The additives and Filters are combined with a Fluorocarbons resin. Fluorocarbon resin is an Oleophobic material. Oleophobic materials are materials that repeal oils caused by fingerprints.[6]

Anti-Scratch Coating compositions[edit]

Scratch-resistant materials are present in anti-Starch coating either as binders, additives, and/or filters.[7] Binder, additives, filters make up Anti-Scratch coating's Thin-film, a thin nano-meter to micro-meter layer applied to a substrate (an object's surface).

Binders[edit]

In Anti-Scratch coatings, Binders, coating's glue-like cohesive structure, provide scratch resistances or/and provide structure for Scratch resistant additives and filters.

Binders that offer scratch resistances and structure include:

Ceramic-(Inorganic-non metal-based) binders

- Polysilazanes

-Diamond-like Carbon

Resin (organic polymer-based) binders

- epoxy

-polycarbonate

-polyethylene

[7][8][9]

Fillers[edit]

Scratch-resistant coatings use special Scratch-resistant filters. Fillers are particles that enhance specific functional properties of coatings with/or with binders. Common Scratch-resistant fillers include:

- titanium dioxide(TiO2)

-zirconium dioxide(ZrO2)

-Aluminum oxide hydroxide(AlOOH)

-Silicon monoxide(SiO)

[10][11]

Additives[edit]

Anti-scratch coatings use additives with specific Scratch-resistant properties. Additives are particles dispersed in a thin film in quantities of less than one percent.

Additives that decrease scratch visibility include[2]:

-Siloxane

-Eruamides (A type of Fatty acid used in coatings due to Fatty Acid Amides Scratch-resistant properties[12])

Additives that lower friction, an important part of Scratch resistance, include:

-molybdenum (Mo)

-disulfide,

-graphite.

-oleic acid amide

Additives that control for micro-cracking, a micro-sized step in Scratch formation, include: [13]

-ZnO (Zinc oxide)

-BaO (Barium oxide)

-PbO (lead dioxide)

Theory[edit]

Anti-Scratch Coatings change the substrate's Tribological (Properties resulting from surface-environment interaction) and Mechanical (a material's physical properties) properties. Changed Tribological and Mechanical properties impact Scratch's deformation Mechanisms (microscopic effects of deforming a material), Scratch visibility, friction, and other additional considerations. [14]

Impact on deformation Mechanisms[edit]

Scratch-resistant coatings lessen the impacts of scratches three primary deformation mechanisms: Ironing, micro-cracking, and plowing.[15]

Plowing[edit]

The dislocation of atoms into weaker Atomic planes due to Plowing's plastic deformations.

Plowing is when an indenture breaks a material's surface and leaves scratch marks. Anti-Scratch coatings contain filter-based materials with high ductility (ability to withstand plastic deformations) to limit plowing. Plastic deformations occur when the atomic bonds holding atomic planes break, causing the planes to dislocate into weaker positions. Control for plowing is important as every additional plowing event leaves a scratch and greater risk for internal damage, which will decrease products lifespan.[16]

Micro cracking[edit]

Micro-Cracking is micro-sized cracks that form on brittle surfaces due to the jerking indentor movement known as Stick-slip. Anti-Scratch coatings control for Micro-cracking by containing either filters, binders, or additives with high Tensile Strength. Recently, Anti-Scratch research is focusing on Nano-cracking, the Nanotribical version of microcracking by creating nano-specific additives.[17][18]

Ironing[edit]

Anti-Scratch coatings control Scratch Ironing by either prolonging or preventing elastic deformations. Elastic deformations are non-permanent stretching of atomic bonds occurring before plastic deformation.

Anti-Scratch coatings control elastic deformations, which causes a short-term grooving effect, by decreasing elasticity and increasing ductility. Decreasing elasticity, however, must be balanced since low elasticity causes Micro-cracking.

Scratch resistance can also be increased by prolonging the ironing period with yield point materials. Yield point is the point a materials change from elastic to plastic deformations. Higher yield point materials decrease permeant Plowing, by increasing non-permeant Ironing. [19]

Friction[edit]

Scratch resistance coatings contain low friction, the sliding resistance force, surfaces. Low friction surfaces are smooth. Smooth surfaces are important since rougher surfaces are scratches prone: as shown by the Archard Wear Equation.[20]

Archard equation:

W: volume of Wear created during a scratch event.

S: The distance during which both objects were in contact with each other.

N: normal force or amount of pressure applied by the indenting object.

H: Hardness of the material, measured by a given coefficient.

K: The Archard Wear dimensionless constant value of 1x108.

Considerations for plastics[edit]

Scratch-resistant coatings applied to substrates control for Plastic low-Scratch-Hardness by being coated with non-plastic materials. Plastics contain low-Scratch-Hardness due to plastic's high viscoelasticity (highly viscous and elastic deformations) and low crystallinity (High ordered Structure). [19]

Decreasing Scratch visibility[edit]

Surface Topology Map showing Waviness and Lay

Scratch visibility is impacted by Surface grooving. Grooving surrounding a scratch site changes the angle of reflection (direction of light causing waves). When the angle of reflection is greater than 3 percent, scratch's become visible.[19] Anti-Scratch coatings control Scratch visibility by having a low grooving surface. Besides friction, low grooving surfaces depend on the topology (surface) factors of surface texture (Lay) and spacing of irregularities (waviness). Topology is controlled by extreme precision during the coating formation process. [21]

Coating formation[edit]

Main section coating formation

Coating formation is the process of coating-substrate adhesion(attachment). Coating Formation uses "Precision factor" to affect topology-dependent Scratch properties. "Precision factors" include additive concentration, coating thickness, and Viscosity. [22]

Testing of Scratch Resistance[edit]

ASTM International, American Society for Testing and Materials, set material testing standards for materials, including Anti-Scratch coatings. Most Scratch-resistant coatings fall under ASTM standard D7027 - 20 (See External Links). Standard scratch resistance tests involve scratching coatings with a diamond indentor.[23][24]

See Also[edit]

References[edit]

  1. ^ A Critical Study On Scratch Resistance Test Methods (pcoatingsintl.com)
  2. ^ a b Markarian, Jennifer (2009-03-01). "Additives improve scratch resistance in automotive applications". Plastics, Additives and Compounding. 11 (2): 10–15. doi:10.1016/S1464-391X(09)70047-9. ISSN 1464-391X.
  3. ^ Akafuah, Nelson K.; Poozesh, Sadegh; Salaimeh, Ahmad; Patrick, Gabriela; Lawler, Kevin; Saito, Kozo (2016-06). "Evolution of the Automotive Body Coating Process—A Review". Coatings. 6 (2): 24. doi:10.3390/coatings6020024. {{cite journal}}: Check date values in: |date= (help)CS1 maint: unflagged free DOI (link)
  4. ^ Frictional and Optical Properties of Diamond-Like-Carbon Coatings on Polycarbonate - IOPscience
  5. ^ "Elsevier Enhanced Reader". reader.elsevier.com. Retrieved 2021-10-20.
  6. ^ Wu, Yi; Yan, Kai; Xu, Guilin; Yang, Chenguang; Wang, Dong (2021-10-01). "Facile preparation of super-oleophobic TiO2/SiO2 composite coatings by spraying method". Progress in Organic Coatings. 159: 106411. doi:10.1016/j.porgcoat.2021.106411. ISSN 0300-9440.
  7. ^ a b https://pdhonline.com/courses/m223/EM%201110-2-3400_Chapter4.pdf
  8. ^ https://www.paint.org/coatingstech-magazine/articles/polysilazanes-binders-that-make-a-difference-to-surfaces/
  9. ^ https://coatings.specialchem.com/coatings-properties/abrasion-resistance
  10. ^ Hoornaert, T.; Hua, Z. K.; Zhang, J. H. (2010). Luo, Jianbin; Meng, Yonggang; Shao, Tianmin; Zhao, Qian (eds.). "Hard Wear-Resistant Coatings: A Review". Advanced Tribology. Berlin, Heidelberg: Springer: 774–779. doi:10.1007/978-3-642-03653-8_257. ISBN 978-3-642-03653-8.
  11. ^ http://www.ajesjournal.com/PDFs/08-2/2.%20Nanotechnology-A%20boon.pdf
  12. ^ Mansha, M.; Gauthier, C.; Gerard, P.; Schirrer, R. (2011-06-22). "The effect of plasticization by fatty acid amides on the scratch resistance of PMMA". Wear. 271 (5): 671–679. doi:10.1016/j.wear.2010.12.089. ISSN 0043-1648.
  13. ^ Moezzi, Amir; McDonagh, Andrew M.; Cortie, Michael B. (2012-03-15). "Zinc oxide particles: Synthesis, properties and applications". Chemical Engineering Journal. 185–186: 1–22. doi:10.1016/j.cej.2012.01.076. ISSN 1385-8947.
  14. ^ "Elsevier Enhanced Reader". reader.elsevier.com. Retrieved 2021-10-30.
  15. ^ Li, Yongqiang; Zhang, Ling; Li, Chunzhong (2020-02-01). "Highly transparent and scratch resistant polysiloxane coatings containing silica nanoparticles". Journal of Colloid and Interface Science. 559: 273–281. doi:10.1016/j.jcis.2019.09.031. ISSN 0021-9797.
  16. ^ Cite error: The named reference :3 was invoked but never defined (see the help page).
  17. ^ "What's So Special about the Nanoscale? | National Nanotechnology Initiative". www.nano.gov. Retrieved 2021-10-19.
  18. ^ Li, Yongqiang; Zhang, Ling; Li, Chunzhong (2020-02-01). "Highly transparent and scratch resistant polysiloxane coatings containing silica nanoparticles". Journal of Colloid and Interface Science. 559: 273–281. doi:10.1016/j.jcis.2019.09.031. ISSN 0021-9797.
  19. ^ a b c FUNDAMENTAL SCRATCH BEHAVIOR OF STYRENE-ACRYLONITRILE RANDOM COPOLYMERS - ROBERT LEE BROWNING
  20. ^ Archard, J. F. (1953-08). "Contact and Rubbing of Flat Surfaces". Journal of Applied Physics. 24 (8): 981–988. doi:10.1063/1.1721448. ISSN 0021-8979. {{cite journal}}: Check date values in: |date= (help)
  21. ^ "What is a Surface Topography? - Definition from Corrosionpedia". Corrosionpedia. Retrieved 2021-10-28.
  22. ^ "Abrasion & Wear Resistance in Paint & Coatings: Basics & Test Methods". coatings.specialchem.com. Retrieved 2021-10-20.
  23. ^ "ASTM D7027 - 20 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine". www.astm.org. Retrieved 2021-10-31.
  24. ^ Sander, T.; Tremmel, S.; Wartzack, S. (2011-12-25). "A modified scratch test for the mechanical characterization of scratch resistance and adhesion of thin hard coatings on soft substrates". Surface and Coatings Technology. Proceedings of the 38th International Conference on Metallurgical Coatings and Thin Films (ICMCTF). 206 (7): 1873–1878. doi:10.1016/j.surfcoat.2011.08.035. ISSN 0257-8972.

External links[edit]

Retrieved from "https://en.wikipedia.org/w/index.php?title=User:MatthewUCSB/sandbox/Anti-Scratch_Coating&oldid=1053585635"