User talk:Iepeulas

Please add any comments below.

Karo

I *think* that's his official site, but I'm not really sure. Ripping a Wikipedia article off whole cloth doesn't really seem like something an official webmaster would do...but stranger things have happened. Gromlakh (talk) 19:36, 9 April 2008 (UTC)

Speedy deletion of Donald E. Washkewicz

A tag has been placed on Donald E. Washkewicz requesting that it be speedily deleted from Wikipedia. This has been done under section A7 of the criteria for speedy deletion, because the article appears to be about a person or group of people, but it does not indicate how or why the subject is notable: that is, why an article about that subject should be included in an encyclopedia. Under the criteria for speedy deletion, articles that do not indicate the subject's importance or significance may be deleted at any time. Please see the guidelines for what is generally accepted as notable, as well as our subject-specific notability guideline for biographies.

If you think that this notice was placed here in error, you may contest the deletion by adding {{hangon}} to the top of the page (just below the existing speedy deletion or "db" tag), coupled with adding a note on the talk page explaining your position, but be aware that once tagged for speedy deletion, if the article meets the criterion it may be deleted without delay. Please do not remove the speedy deletion tag yourself, but don't hesitate to add information to the article that would would render it more in conformance with Wikipedia's policies and guidelines. Lastly, please note that if the article does get deleted, you can contact one of these admins to request that a copy be emailed to you. Beach drifter (talk) 02:55, 10 April 2008 (UTC)

Wow, that article had been there for less than a minute. The article meets none of the criteria for speedy deletion and I have added the "hang" on template and added my reasoning on the articles talk page....Iepeulas (talk)

Articles you might like to edit, from SuggestBot

SuggestBot predicts that you will enjoy editing some of these articles. Have fun!

Stubs Metalworking hand tool Hot rolling Draw plate Drift pin Coining (machining) Grindersparks Vicalloy Isothiocyanate Centinel of the Northwest Territory Sprue (casting) Gauge (engineering) Kamacite Casting flask Cryoprotectant U.S. Route 35 Chillicothe Gazette Cutoff Piece work Refraction (metallurgy)

Cleanup Sand casting Steel mill Boric acid Merge Arc-PVD and Cathodic arc deposition Sputtering and Sputter deposition Electrical discharge machining Lathe (metal) Nitrogenase Add Sources Forge Operation Dominic I and II Basic oxygen furnace Wikify Punch press Millwright Aranmula kannadi Expand Sodium bromide Hot plate Blend

SuggestBot picks articles in a number of ways based on other articles you've edited, including straight text similarity, following wikilinks, and matching your editing patterns against those of other Wikipedians. It tries to recommend only articles that other Wikipedians have marked as needing work. Your contributions make Wikipedia better -- thanks for helping.

If you have feedback on how to make SuggestBot better, please tell me on SuggestBot's talk page. Thanks from ForteTuba, SuggestBot's caretaker.

P.S. You received these suggestions because your name was listed on the SuggestBot request page. If this was in error, sorry about the confusion. -- SuggestBot (talk) 01:14, 1 May 2008 (UTC)

Sand molded casting

It might be right move. The title is more descriptive and shorter. Please do the change and let me know so I can make changes in the other links. Krzysiulek (talk) 19:17, 1 June 2008 (UTC) ___________________________________________________________ [edit] Sand molded casting It has been proposed that Sand molded casting be moved to Sand casting which is the accepted term, in english, to describe both the manufacturing process and the resulting parts. Several editors feel that "Sand casting" is a better title as it has a larger scope than "Sand molded casting" would. Feel free to make you opinion on the matter known, if you feel so inclined. Thanks, Iepeulas (talk) 15:57, 1 June 2008 (UTC)

Retrieved from "http://en.wikipedia.org/wiki/User_talk:Krzysiulek"

Molding Sand

I think each type of sand should be listed as a different article and in the molding sand page there may be a little bit info in general about molding sand basics and links to various types of it. Vertical.limit (talk) 14:43, 16 June 2009 (UTC)

Articles you might like to edit, from SuggestBot

SuggestBot predicts that you will enjoy editing some of these articles. Have fun!

Stubs :Die making Dross Nibbler Molding (process) Marking blue Ironworker Gear Burr (cutter) International Metalworkers' Federation Metalworking hand tool Tipped tool Tramp oil Thread pitch gauge Pearlite Unified numbering system Workshop Rolling Slack tub Pin chuck

Cleanup Punch press Martensite Hammer Merge Work hardening Bicorne Lapidary Add Sources Fabrication (metal) Tool bit Shot peening Wikify Band saw Facet Desalination Expand Bolted joint Extrusion Physical vapor deposition

SuggestBot picks articles in a number of ways based on other articles you've edited, including straight text similarity, following wikilinks, and matching your editing patterns against those of other Wikipedians. It tries to recommend only articles that other Wikipedians have marked as needing work. Your contributions make Wikipedia better -- thanks for helping.

If you have feedback on how to make SuggestBot better, please tell me on SuggestBot's talk page. Thanks from ForteTuba, SuggestBot's caretaker.

P.S. You received these suggestions because your name was listed on the SuggestBot request page. If this was in error, sorry about the confusion. -- SuggestBot (talk) 03:04, 12 August 2009 (UTC)

Unreferenced BLPs

Hello Iepeulas! Thank you for your contributions. I am a bot alerting you that 1 of the articles that you created is tagged as an Unreferenced Biography of a Living Person. The biographies of living persons policy requires that all personal or potentially controversial information be sourced. In addition, to ensure verifiability, all biographies should be based on reliable sources. if you were to bring this article up to standards, it would greatly help us with the current 940 article backlog. Once the article is adequately referenced, please remove the {{unreferencedBLP}} tag. Here is the article:

1. Donald E. Washkewicz - Find sources: Google (books · news · scholar · free images · WP refs) · FENS · JSTOR · TWL

Thanks!--DASHBot (talk) 00:24, 9 January 2010 (UTC)

Proposed deletion of Basic dimension

The article Basic dimension has been proposed for deletion because of the following concern:

Wikipedia is not a dictionary. Also, does not appear to be a notable concept.

While all constructive contributions to Wikipedia are appreciated, content or articles may be deleted for any of several reasons.

You may prevent the proposed deletion by removing the {{proposed deletion/dated}} notice, but please explain why in your edit summary or on the article's talk page.

Please consider improving the article to address the issues raised. Removing {{proposed deletion/dated}} will stop the proposed deletion process, but other deletion processes exist. In particular, the speedy deletion process can result in deletion without discussion, and articles for deletion allows discussion to reach consensus for deletion. Sven Manguard Wha? 20:07, 20 September 2013 (UTC)

ArbCom elections are now open!

Hi,
You appear to be eligible to vote in the current Arbitration Committee election. The Arbitration Committee is the panel of editors responsible for conducting the Wikipedia arbitration process. It has the authority to enact binding solutions for disputes between editors, primarily related to serious behavioural issues that the community has been unable to resolve. This includes the ability to impose site bans, topic bans, editing restrictions, and other measures needed to maintain our editing environment. The arbitration policy describes the Committee's roles and responsibilities in greater detail. If you wish to participate, you are welcome to review the candidates' statements and submit your choices on the voting page. For the Election committee, MediaWiki message delivery (talk) 13:43, 23 November 2015 (UTC)