Watkins 25

Add links
From Wikipedia, the free encyclopedia

Watkins 25
Development
DesignerWatkins Design Team
LocationUnited States
Year1983
Builder(s)Watkins Yachts
NameWatkins 25
Boat
Displacement4,800 lb (2,177 kg)
Draft2.50 ft (0.76 m)
Hull
TypeMonohull
ConstructionFiberglass
LOA24.92 ft (7.60 m)
LWL21.00 ft (6.40 m)
Beam8.50 ft (2.59 m)
Engine type7.5 to 15 hp (6 to 11 kW) outboard motor or 9 hp (7 kW) diesel engine
Hull appendages
Keel/board typefin keel
Ballast1,900 lb (862 kg)
Rudder(s)internally-mounted spade-type rudder
Rig
Rig typeBermuda rig
I foretriangle height29.00 ft (8.84 m)
J foretriangle base10.50 ft (3.20 m)
P mainsail luff24.25 ft (7.39 m)
E mainsail foot9.00 ft (2.74 m)
Sails
SailplanMasthead sloop
Mainsail area109.13 sq ft (10.139 m2)
Jib/genoa area152.25 sq ft (14.144 m2)
Total sail area261.38 sq ft (24.283 m2)
Racing
PHRF243
[edit on Wikidata]

The Watkins 25, also known as the W25 and marketed as the Seawolf 25 from 1986, is an American trailerable sailboat that was designed by the Watkins Design Team and first built in 1983.[1][2][3][4][5]

Development[edit]

The Watkins 25 design is believed to have been based upon the hull moulds for the Columbia 24, with a newly designed deck and coachhouse roof. The design was later sold to Com-Pac Yachts and was developed into the Com-Pac 25.[1][5]

Production[edit]

The design was built by Watkins Yachts in Clearwater, Florida, United States. About 183 examples of the design were produced from 1983 to 1989, but it is now out of production.[1][3][5][6]

Design[edit]

The Watkins 25 is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a masthead sloop rig, a raked stem, a vertical transom, an internally mounted spade-type rudder controlled by a tiller and a fixed fin keel. It displaces 4,800 lb (2,177 kg) and carries 1,900 lb (862 kg) of ballast.[1][2][5]

The boat has a draft of 4.00 ft (1.22 m) with the deep keel and 2.50 ft (0.76 m) with the optional shoal draft keel. The deep draft keel was developed at the request of a customer by cutting off the old keel mould and making a new one for a cast lead keel. Only a few were produced, probably between two and five.[1][2][3][5]

Each boat was custom-built to the buyer's specifications, so the fleet varies in options and features. A bow-mounted anchor platform was optional. When mounted, a different pulpit was used and the forestay was shortened to accommodate the wooden platform, but retained the same attachment point and sail plan. Other options include a flushing head, pressurized water, a hot water tank and a reboarding ladder.[2]

The design's hull is molded in a single piece using polyester resin and fiberglass woven roving, as well as multidirectional chopped strand fibers (MSCF). The keel is integral to the hull and the ballast is internal to the keel. The deck and the cockpit and also moulded in one piece, also using polyester resin and fiberglass woven roving with MCSF. Plywood coring is employed for the cabin top, deck, seat and the cockpit sole for stiffness. The hull-to-deck joint is flanged, glued and then screwed into place. There is an aluminum toe rail, stainless steel through-bolted into place, bonding the toe rail, deck and the hull.[2]

The spars are all coated 6061-T6 aluminum extrusions. There is a single reefing point. The mainsheet design involved two blocks, one on each side or the cabin top, although many have been modified to a mainsheet traveler.[2]

An anchor well is located at the bow with a hawspipe leading the anchor chain into the "V" berth locker. The main cabin has 71 in (180 cm) of headroom and is finished with hand-rubbed teak trim, with the bulkheads and cabinetry made from teak veneer on plywood. The main cabin sole is teak and holly veneer over plywood.[2]

The boat is normally fitted with a small outboard motor of 7.5 to 15 hp (6 to 11 kW) for docking and maneuvering, although a Yanmar inboard diesel engine of 9 hp (7 kW) was a factory option. The fresh water tank has a capacity of 40 U.S. gallons (150 L; 33 imp gal).[1][2]

Ventilation on early boats was provided by two opening plastic framed ports with integral screens and on later boats built three aluminum framed ports, also with integral screens. All boats also have an extruded aluminum framed Bomar forward deck hatch.[2]

The design has a PHRF racing average handicap of 243 and a hull speed of 6.1 kn (11.3 km/h).[4][5]

Operational history[edit]

The boat is supported by an active class club, the Watkins Owners.[7]

In a 2010 review Steve Henkel wrote, "best features: At 5' 11" the boat has the best headroom among her comp[etitor]s. Her extruded and perforated aluminum toe rail is handy for easy placement of genoa blocks and fenders. Worst features: The very shallow (2' 6") keel is convenient but prevents good upwind performance; a deep-keel version was available toward the end of the boat’s production run but didn’t attract many buyers. The rudder depth looks a bit low to us, and therefore might give control problems under adverse weather conditions."[4]

See also[edit]

Similar sailboats

References[edit]

  1. ^ a b c d e f McArthur, Bruce (2019). "Watkins 25 sailboat". sailboatdata.com. Archived from the original on 2 October 2019. Retrieved 11 November 2019.
  2. ^ a b c d e f g h i Watkins Owners Association (20 October 2006). "Watkins W25". watkinsowners.com. Archived from the original on 6 May 2019. Retrieved 11 November 2019.
  3. ^ a b c Watkins Owners Association (3 May 2008). "History of Watkins Yachts". watkinsowners.com. Archived from the original on 14 March 2019. Retrieved 11 November 2019.
  4. ^ a b c Henkel, Steve: The Sailor's Book of Small Cruising Sailboats, page 375. International Marine/McGraw-Hill, 2010. ISBN 978-0-07-163652-0
  5. ^ a b c d e f Sea Time Tech, LLC (2022). "Watkins 25". sailboat.guide. Archived from the original on 12 April 2022. Retrieved 12 April 2022.
  6. ^ McArthur, Bruce (2019). "Watkins Yachts 1973 - 1989". sailboatdata.com. Archived from the original on 2 October 2019. Retrieved 11 November 2019.
  7. ^ McArthur, Bruce (2022). "Watkins Owners". sailboatdata.com. Archived from the original on 22 March 2022. Retrieved 22 March 2022.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Watkins_25&oldid=1178520446"