Acacia inceana
| Acacia inceana | |
|---|---|
Scientific classification 
| |
| Kingdom: | Plantae |
| Clade: | Tracheophytes |
| Clade: | Angiosperms |
| Clade: | Eudicots |
| Clade: | Rosids |
| Order: | Fabales |
| Family: | Fabaceae |
| Subfamily: | Caesalpinioideae |
| Clade: | Mimosoid clade |
| Genus: | Acacia |
| Species: | A. inceana
|
| Binomial name | |
| Acacia inceana | |
| |
| Occurrence data from AVH | |
Acacia inceana is a shrub or tree of the genus Acacia and the subgenus Plurinerves that is endemic to south western Australia.
Description
[edit]The shrub or tree typically grows to a height of 1 to 4 metres (3 to 13 ft).[1] It has terete branchlets that can be glabrous or covered with fine downy hairs. Like most species of Acacia it has phyllodes rather than true leaves. The evergreen, ascending to erect phyllodes are straight or slightly curved with a length of 4 to 8.5 cm (1.6 to 3.3 in) and a diameter of 1 to 1.5 mm (0.039 to 0.059 in) or a width of 4 to 6 mm (0.16 to 0.24 in) when flat. The phyllodes narrow down to a delicate tip at the end that is normally curved and innocuous to pungent tip. The rigid and glabrous or finely haired phyllodes have many closely parallel and indistinct nerves.[2] It blooms from August to September and produces yellow flowers.[1] The simple inflorescences occur in pairs in the axils and have spherical flower-heads with a diameter of 3.5 to 4 mm (0.14 to 0.16 in) containing 10 to 30 golden coloured flowers. After flowering thinly coriaceous seed pods form with a linear shape that are slightly raised over between each of the seeds. The glabrous, tan to dark brown seed pods have a length of 4 to 10 cm (1.6 to 3.9 in) and a width of 3 to 4 mm (0.12 to 0.16 in). The subglossy dark brown seeds inside the pods have an oblong shape with a length of 4.5 to 6 mm (0.18 to 0.24 in) and have a terminal white aril.[2]
Taxonomy
[edit]The species was first formally described by the botanist Karel Domin in 1923 as part of the work New Additions to the Flora of Western Australia as published in Vestnik Kralovske Ceske Spolecnosti Nauk, Trida Matematiko-Prirodevedecke. It was reclassified as Racosperma inceanum by Leslie Pedley in 2003 then transferred back to genus Acacia in 2006. The only other synonym is Acacia inceae as described by Joseph Maiden and William Blakely in 1927.[3]
There are three recognised subspecies:
- Acacia inceana subsp. conformis[4]
- Acacia inceana subsp. inceana[5]
- Acacia inceana subsp. latifolia[6]
Distribution
[edit]It is native to an area in the Wheatbelt and Goldfields-Esperance regions of Western Australia where it is commonly situated along the margins of salt lakes and salt pans, on flats and plains growing in clay or red sandy soils.[1] It is distributed from around Morawa in the north west down to around Hines Hill in the south east and out to the east as far as about Kalgoorlie as a part of scrubland or open woodland communities.[2]
See also
[edit]References
[edit]- ^ a b c "Acacia inceana". FloraBase. Western Australian Government Department of Biodiversity, Conservation and Attractions.
- ^ a b c "Acacia inceana". WorldWideWattle. Western Australian Herbarium. Retrieved 21 April 2020.
- ^ "Acacia inceana Domin". Atlas of Living Australia. Global Biodiversity Information Facility. Retrieved 21 April 2020.
- ^ "Acacia inceana subsp. conformis". FloraBase. Western Australian Government Department of Biodiversity, Conservation and Attractions.
- ^ "Acacia inceana subsp. inceana". FloraBase. Western Australian Government Department of Biodiversity, Conservation and Attractions.
- ^ "Acacia inceana subsp. latifolia". FloraBase. Western Australian Government Department of Biodiversity, Conservation and Attractions.