Jump to content

Armstrong Cut

From Wikipedia, the free encyclopedia
Taken from the top of the north side of Armstrong Cut in 1989 facing westbound on the Cut-Off, note the tapered embankment in the foreground as compared to the same embankments seen in the distant background in the 1911 shot of Johnsonburg Station.

Armstrong Cut is one of the largest cuts on the Lackawanna Cut-Off railroad line in northwest New Jersey. Located between approximately mileposts 61.4 and 62.3 in Frelinghuysen Township, the cut was constructed between 1908 and 1911 by contractor Hyde, McFarlan & Burke. The cut, which was created by removing fill material obtained by blasting with dynamite or other methods, is 0.89 miles (1.43 km) long, has an average depth of 52 feet (16 m), and a maximum depth of 104 feet (32 m). The fill was created as a result of the removal of 852,000 cubic yards of fill material from this section of the right-of-way. Armstrong Cut is located on a tangent (straight) section of track, permitting 80 mph (130 km/h).

Part of the north side of Armstrong Cut collapsed in 1941, completely blocking the Cut-Off, and causing all traffic to be diverted to the Lackawanna Old Road for a month while the embankment was excavated back. Legend has it that the collapse occurred in the middle of the night and that the freight agent at the freight station (the passenger station had closed the previous year) heard the embankment give way and raised the alarm.[1]

Armstrong Cut is named for W.C. Armstrong, who was the principal owner of the land that was acquired for this cut.[2]

References

[edit]
  1. ^ Taber, Thomas Townsend; Taber, Thomas Townsend III (1980). The Delaware, Lackawanna & Western Railroad in the Twentieth Century 1, p. 35. Muncy, PA: Privately printed. ISBN 0-9603398-2-5.
  2. ^ 1906 Survey Map of the Delaware Valley Cut-Off, September 1, 1906.