Jump to content

Auldgirth Bridge

Coordinates: 55°09′34″N 03°42′35″W / 55.15944°N 3.70972°W / 55.15944; -3.70972
From Wikipedia, the free encyclopedia

55°09′34″N 03°42′35″W / 55.15944°N 3.70972°W / 55.15944; -3.70972

Auldgirth Bridge
The bridge, spanning the River Nith
Coordinates55°09′34″N 3°42′35″W / 55.159492°N 3.709743°W / 55.159492; -3.709743
CarriesFootpath (formerly A76 road, bypassed in 1979)
CrossesRiver Nith
Heritage statusCategory A listed building
Characteristics
MaterialRed sandstone ashlar
Total length200 feet (61 m)
Width25.7 feet (7.8 m)
No. of spans3
History
ArchitectDavid Henderson of Edinburgh
Construction end1782
Location
Map

Auldgirth Bridge is a bridge over the River Nith just outside Auldgirth in Dumfries and Galloway, Scotland. Designed by David Henderson of Edinburgh in 1781, it was built by William Stewart, and completed in 1782; Thomas Carlyle's father worked on its construction.[1][2] The bridge is made of red sandstone ashlar, with three segmental arched spans, and carried road traffic and pedestrians; refuges are built into the parapets, supported by pilasters on the piers, allowing pedestrians using the bridge to move out of the path of heavier traffic.[2] Its total length is 200 feet (61 m). Each of its three spans is 56 feet (17 m) wide, and its roadway, which is level, measures 25.7 feet (7.8 m) from one parapet to the other.[2][1]

The bridge was built to carry the main road from Auldgirth (which became the A76) south over the river.[2] It was designated a Category A listed building in 1971.[1] In 1979, a new road bridge was completed a short distance away and the course of the road was altered, bypassing Auldgirth Bridge.[2] It remains in use as a footbridge.

References

[edit]
  1. ^ a b c Historic Environment Scotland. "Auldgirth Bridge (Category A Listed Building) (LB3966)". Retrieved 11 April 2021.
  2. ^ a b c d e Canmore:Auldgirth Bridge.

Sources

[edit]