Jump to content

De Hiemerter Mole, Burgwerd

Coordinates: 53°06′00″N 5°31′08″E / 53.10007°N 5.518910°E / 53.10007; 5.518910
From Wikipedia, the free encyclopedia
De Heimerter Mole, Burgwerd
De Heimerter Mole, September 2008
Map
Origin
Mill nameDe Heimerter Mole
Mill locationHemert 13, 8742 KH Burgwerd
Coordinates53°06′00″N 5°31′08″E / 53.10007°N 5.518910°E / 53.10007; 5.518910
Operator(s)Stichting de Fryske Mole
Year built1811
Information
PurposeDrainage mill
TypeHollow post mill
Roundhouse storeysOne storey roundhouse
No. of sailsFour sails
Type of sailsCommon sails
WindshaftCast iron
WindingWinch
Auxiliary powerDiesel engine
Type of pumpArchimedes' screw

De Heimerter Mole is a hollow post mill in Burgwerd, Friesland, Netherlands which has been restored to working order. The mill is listed as a Rijksmonument, number 39348.[1]

History

[edit]

In 1811, the mill was built to drain the Heimerter Polder, which had an area of 385 pondemaat (141 ha; 350 acres). The mill was then owned by the church at Schalsum[2] In 1950, the sails were fitted with streamlined leading edges on the Fok system. In 1957, a diesel engine was installed as auxiliary power and the wooden Archimedes' screw replaced by one of steel.[3] In 1969, the mill ceased work. The diesel engine was removed in the mid-1970s and an automatic pumping station built.[4] In 1973, the mill was bought by De Hollandsche Molen.[2] In 1976, the mill was restored to working order. On 16 May 1988, the mill was sold to Stichting De Fryske Mole (English:Frisian Mills Foundation).[3]

Description

[edit]

De Heimerter Mole is what the Dutch describe as a "spinnenkopmolen" (English: Spider mill). It is a small hollow post mill winded by a winch. The four Common sails, which have a span of 12.00 metres (39 ft 4 in), are carried in a wooden windshaft. The windshaft also carries the brake wheel which has 29 cogs. This drives the wallower (16 cogs) at the top of the upright shaft, which passed through the main post. At the bottom of the upright shaft, the crown wheel (31 cogs) drives the Archimedes' screw via a gear wheel with 29 pegs. The Archimedes' screw has an axle diameter of 407 millimetres (16 in) and is 950 millimetres (3 ft 1 in) diameter overall. Its length is 3.95 metres (13 ft 0 in). It is inclined at an angle of 28°. Each revolution of the screw lifts 221 litres (49 imp gal) of water.[3]

Public access

[edit]

De Heimerter Mole is open to the public by appointment.[5]

References

[edit]
  1. ^ "Technische gegevens" (in Dutch). De Hollandsche Molen. Archived from the original on 27 May 2012. Retrieved 6 November 2009. (Click on Technische gegevens to view.)
  2. ^ a b "Burgwerd / Hemert, Friesland" (in Dutch). Molendatabase. Retrieved 6 November 2009.
  3. ^ a b c Stichting De Fryske Mole (1995). Friese Molens (in Dutch). Leeuwarden: Friese Pers Boekerij bv. pp. 203, 259. ISBN 90-330-1522-6.
  4. ^ "Geschiedenis" (in Dutch). De Hollandsche Molen. Archived from the original on 27 May 2012. Retrieved 6 November 2009. (Click on Geschiedenis to view.)
  5. ^ "Informatie" (in Dutch). De Hollandsche Molen. Archived from the original on 27 May 2012. Retrieved 6 November 2009. (Click on "Informatie" to view.)