Jump to content

Grenszicht, Emmer-Compascuum

Coordinates: 52°49′16″N 7°03′40″E / 52.82111°N 7.06111°E / 52.82111; 7.06111
From Wikipedia, the free encyclopedia
(Redirected from Grenzicht, Emmer-Compascuum)

Grenszicht
The mill in February 2008
Map
Origin
Mill nameGrenszicht
Molen van Geerdink
Mill locationHoofdkanal W.Z. 109, 7881 AE, Emmer-Compascuum
Coordinates52°49′16″N 7°03′40″E / 52.82111°N 7.06111°E / 52.82111; 7.06111
Operator(s)Private
Year built1907
Information
PurposeCorn mill
TypeSmock mill
StoreysThree-storey smock
Base storeysFour-storey base
Smock sidesEight sides
No. of sailsFour sails
Type of sailsCommon sails
WindshaftCast iron
WindingTailpole and winch
Auxiliary powerSteam engine, then a 22 horsepower (16 kW) oil engine, then a 25 horsepower (19 kW) electric motor.
No. of pairs of millstonesTwo pairs of Cullen stones
Size of millstones1.40 metres (4 ft 7 in)

Grenszicht (English Border view) or Molen van Geerdink is a smock mill in Emmer-Compascuum, Netherlands. It was built in 1907. The mill is listed as a Rijksmonument, number 14690.[1]

History

[edit]

Grenszicht was built in 1907 by millwright J H Schulte of Ter Apel, Groningen. It had previously stood at Oude Pekela, Groningen where it had been used as a drainage windmill. A steam engine was used as auxiliary power. It was replaced by a 22 horsepower (16 kW) oil engine. This was replaced in 1941 by a 25 horsepower (19 kW) electric motor. A pair of sails was lost in 1936, and the other pair in 1947. The mill ceased work in 1967. In the winter of 1974–75, the mill was restored by millwright Molema of Scheemda, Groningen. New sails and a new windshaft were fitted, and the mill was re-thatched. The original wooden windshaft was kept as a museum piece.[2] On completion of the restoration, the mill was named "Grenszicht" as it stands close to the Dutch – German border.[3] In 2002, a museum was opened as part of the mill.[2]

Description

[edit]

Grenszicht is what the Dutch describe as an "achtkante stellingmolen" – a smock mill with a stage. The mill has a four-storey base with a three-storey smock. The stage is at third-floor level and is 8.15 metres (26 ft 9 in) above ground level. The smock and cap are thatched. The cap is winded by a tailpole and winch. The four Common sails, which span 18.80 metres (61 ft 8 in) are carried on a cast-iron windshaft. This was cast in 1928 by millwright H J Koning. The windshaft also carries the brake wheel which has 69 cogs. This drives the wallower (29 cogs) at the top of the upright shaft. At the bottom end of the upright shaft the great spur wheel (81 cogs) drives two lantern pinion stone nuts, of 23 and 26 staves. Each stone nut drives a pair of 1.40 metres (4 ft 7 in) Cullen millstones.[1]

Public access

[edit]

Grenszicht is open to the public by appointment.[4]

References

[edit]
  1. ^ a b "Technische gegevens" (in Dutch). De Hollandsche Molen. Archived from the original on 7 October 2011. Retrieved 16 August 2009. (Click on Technische gegevens to view.)
  2. ^ a b "Geschiedenis" (in Dutch). De Hollandsche Molen. Archived from the original on 7 October 2011. Retrieved 16 August 2009. (Click on Geschiedenis to view.)
  3. ^ "Emmer-Compascuum, Drenthe" (in Dutch). Molendatabase. Retrieved 16 August 2009.
  4. ^ "Informatie" (in Dutch). De Hollandsche Molen. Archived from the original on 7 October 2011. Retrieved 16 August 2009. (Click on Informatie to view.)