Hemispherical omnidirectional gimbaled wheel
A hemispherical omnidirectional gimbaled wheel (HOG wheel) is a drive system utilizing a hemisphere spinning continuously on its axis.
When the hemisphere is horizontal, it is like a spinning top, and applies negligible torque to its contact point on the ground. When tipped on edge, however, it pulls like a traditional circular wheel. The torque can be quickly vectored in any direction by tilting the hemisphere side-to-side and/or front-to-back. For example, if the hemisphere is spinning clockwise, tilting it to the right will "pull" the vehicle forward, tilting it to the left will "push" the vehicle backward, and front-to-back tilt will push left or right. Notably, the torque is proportional to the hemisphere's tilt, providing performance similar to an infinite gear ratio, but without any gears.
One limitation of the HOG wheel is its reliance on a single point of contact with the ground. This requires a flat, hard surface, especially for small robotic vehicles.[1]
The October 1938 issue of Mechanics and Handicraft magazine featured a concept illustration of a HOG drive automobile called a "Hemisphere Drive Speedster."[2] A personal vehicle utilizing a HOG drive made from Chinese woks won the 1988 Toyota Olympic Ideas competition.[3] More recently, it has seen use in robotics, where it has also been called a "singularity drive" due to the lack of motion (singularity) when the hemisphere is vertical.[4]
References
[edit]- ^ "Novel Drive Wheel System Based On Spinning Sphere - Slashdot". tech.slashdot.org. Retrieved 2023-03-31.
- ^ "Mechanics and Handicraft". October 1938. Retrieved 3 March 2016.
{{cite magazine}}: Cite magazine requires|magazine=(help) - ^ Cross, Michael (10 Dec 1988). "New Scientist". Retrieved 3 March 2016.
{{cite magazine}}: Cite magazine requires|magazine=(help) - ^ Ackerman, Evan (7 Jul 2011). "You've Never Seen a Robot Drive System Like This Before". IEEE Spectrum. Retrieved 3 March 2016.