Jump to content

High Bridge, Mavesyn Ridware

From Wikipedia, the free encyclopedia
High Bridge
A single-span metal bridge over a river
The bridge in 2011
Coordinates52°44′54″N 1°51′54″W / 52.748387°N 1.864892°W / 52.748387; -1.864892
CarriesPedestrians and cyclists
CrossesRiver Trent
LocaleMavesyn Ridware, Staffordshire, England
Maintained byStaffordshire County Council
Heritage statusGrade II* listed building
Characteristics
MaterialCast iron
No. of spans1
History
Constructed byJoseph Potter
Opened1830
Location
Map

High Bridge spans the River Trent between Mavesyn Ridware and Handsacre (near Lichfield) in Staffordshire, England.

Design

[edit]

The bridge is a single cast-iron arch cast by the Coalbrookdale Company in Shropshire, famous for the Iron Bridge (the first substantial cast-iron bridge in the world). The same company had previously cast Potter's 1824 Chetwynd Bridge over the River Tame at nearby Alrewas.[1][2]

The bridge has a span of 140 feet (43 metres). is 25 feet 8 inches (7.8 metres) wide, and rises to 14 feet (4.3 metres) above the river. The arch is made from five ribs, themselves made up of seven segments bolted together. Each rib is 3 feet (0.91 metres) deep and 2 inches (51 millimetres) thick. Circular tie rods provide lateral support and the spandrels (the space between the top of the arch and the bridge deck) decorative X-shaped cross-bracing. The abutments are of rusticated ashlar and . The original iron parapet is no longer in place and the current version is more modern. The abutments sweep forward and terminate as semi-octagonal piers. They have a dentilled cornice (a protruding ledge with decoration on the underside) and are topped with large stone caps. On each riverbank, behind the bridge, is a flight of steps.[1][2][3]

History

[edit]

The bridge was completed in 1830. It was built by Joseph Potter, the county surveyor for Staffordshire, who had previously worked with Thomas Telford.[1][4] It stood in largely its original condition until it was threatened by mining subsidence in 1982. The bridge was closed to traffic and the bridge was lightened by removing the road surface and parapets. Temporary concrete pillars were built in the river to support the bridge, then a steel arch was built underneath the cast iron to take its weight, after which the pillars were removed. A new bridge was built to the west to carry road traffic and High Bridge now carries pedestrians and cyclists only.[2][5]

See also

[edit]

References

[edit]

Bibliography

[edit]
  • Cossons, Neil; Trinder, Barrie (2002). The Iron Bridge: Symbol of the Industrial Revolution (Second ed.). Chichester: Phillimore. ISBN 9781860772306.
  • Cragg, Roger (2010). Civil Engineering Heritage: West Midlands. Andover: Phillimore. ISBN 9781860775727.
  • McFetrich, David (2022). An Encyclopaedia of World Bridges. Barnsley: Pen & Sword Transport. ISBN 9781526794468.
  • Ruddock, Ted (1979). Arch Bridges and Their Builders: 1735 - 1835. Cambridge: Cambridge University Press. ISBN 9780521218160.

Citations

[edit]
  1. ^ a b c Historic England. "High Bridge (1190422)". National Heritage List for England. Retrieved 29 November 2023.
  2. ^ a b c Cragg, p. 92.
  3. ^ Ruddock, p. 169.
  4. ^ Cossons & Trinder, p. 80.
  5. ^ McFetrich, p. 152.