L&YR Class 27
| L&YR Class 27 | |||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Preserved 27 class locomotive 1300 on the East Lancashire Railway | |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
The Lancashire and Yorkshire Railway Class 27 is a class of 0-6-0 steam locomotive designed for freight work on the Lancashire and Yorkshire Railway (L&YR).
Construction and operation
[edit]
Class 27 locomotives were designed by John Aspinall and 490 were built between 1889 and 1918 at Horwich Works. It was the standard goods engine used by the Lancashire & Yorkshire Railway. Aspinall opted for a two-cylinder format with a non superheated round top boiler. David Joy's configuration of valve gear was employed. By the time Aspinall became general manager of the L&YR on 1 July 1899 more than 400 of the simple but powerful engines had been built. More were built under his successors, Henry Hoy and George Hughes, albeit with some modifications. By 1918 there were 490 locomotives in the class.
Tenders
[edit]Only 260 of the 490 locomotives were built with new tenders. 230 of those built between 1891 and 1906 were ordered without tenders; for these locomotives, tenders were taken from the pool of spares, primarily those that had been made redundant by the conversion of the Barton Wright 0-6-0s to saddle tanks between 1891 and 1900, but others that had been released by the withdrawal of the Barton Wright 4-4-0s from 1892 onwards. These secondhand tenders had been built between 1876 and 1886; they had a wheelbase of 12 feet 6 inches (3.81 m), equally divided, and carried 1,875 or 2,000 imperial gallons (8,520 or 9,090 L) of water. The new Aspinall tenders were smaller, having a wheelbase of 10 ft 6 in (3.20 m), and carried 1,800 imp gal (8,180 L) of water and 3 long tons (3.05 t) of coal.[3]
Development and rebuilding
[edit]As built, there were three primary boiler versions. The majority (418 locomotives) of those built between 1889 and 1906 had round-top fireboxes when new, and operated on saturated steam. Their boilers were similar to those of the 1008 Class 2-4-2T introduced in early 1889, but with slightly shorter barrels (10 ft 4+3⁄4 in (3.169 m) long as opposed to 10 ft 7+3⁄8 in (3.235 m) for the 2-4-2T), and they operated at the same pressure: 160 lbf/in2 (1,100 kPa). A further twenty of these were built in 1909, and ten more in 1917–18.[4] By this time, several of the earlier locomotives had been rebuilt with Belpaire fireboxes, aome also gaining superheaters. With the introduction of Hughers' classification in 1919, the superheated locomotives were placed in Class 28, those retaining saturated steam becoming Class 27.[5]
Superheating
[edit]The L&YR was the first British railway to fit a locomotive with a superheater, this being no. 737 of the 1400 Class 4-4-2 in 1899, and experiments had been conducted with various superheater types since then. Two of the 0-6-0 locomotives built in 1906, nos. 898 and 900, were provided with Schmidt superheaters when new, the purpose being to increase the temperature of steam produced in the boiler so the minimum of energy was lost. They were the first British locomotives to be fitted with the Schmidt superheater when new. After months of trials, 20 further superheated engines were authorised to be built and the first of the superheated class 27s emerged from Horwich Works in 1909. The superheated 27s had the same boiler pressure as the originals, 180 psi. This first batch of twenty had round topped boilers like nos. 898 and 900.[6] In 1914, no. 625 was rebuilt with a superheated Belpaire boiler, but no others were so treated – between 1926 and 1931, most of the others were rebuilt with saturated round-top boilers, only four, nos. 830, 901/3/4 (by this time renumbered as LMS 12533–6) retaining their superheated round-top boilers until withdrawal in 1934–36.[7]
Belpaire fireboxes
[edit]The L&YR had begun using the Belpaire firebox in 1897, with the 1351 Class 0-6-0T. From 1911 to 1916, 48 of the 0-6-0s were rebuilt with these fireboxes, continuing to use saturated steam. Unlike the 2-4-2T, no 0-6-0s were built new with saturated Belpaire boilers.
Belpaire fireboxes with superheaters
[edit]In 1912 a batch of 20 new 0-6-0s was constructed with both Belpaire fireboxes and superheaters, of three different types: the first fifteen used the Schmidt superheater, the next three used the Horwich "top-and-bottom header" (T&B) type, and the last two (nos. 243 and 920) used the Horwich "twin plug" type. These two were the only 0-6-0s with that type of superheater, which was primarily used in larger engines such as the 1546 Class 0-8-0.
Between 1913 and 1916, 23 of the original 0-6-0s plus no. 625 of the 1909 series were rebuilt with Belpaire fireboxes and superheaters; the first nineteen such rebuilds were given the Schmidt type, but from mid-1915 the T&B type was used instead. A further forty were rebuilt with Belpaire fireboxes and T&B superheaters in 1919–22, two of which were among those previously rebuilt with saturated Belpaire boilers.[8][9]
Cylinders and valves
[edit]The first 160 locomotives, of 1889–93, had cylinders with a bore of 18 inches (460 mm) and a stroke of 26 inches (660 mm), the same as those used on the 2-4-2s. The sixty built in 1894 and early 1895 had 17+1⁄2 inches (440 mm) bore, like the 2-4-2s of the same period, and the next sixty of mid-1895 to early 1896 returned to the original size. All 280 had unbalanced D slide valves. From September 1896, locomotives built with saturated boilers had 18-inch cylinders and Richardson balanced slide valves. The locomotives built with superheaters had larger cylinders and piston valves, those built in 1906–09 having a cylinder bore of 20 inches (510 mm) whilst those built in 1912 were further enlarged, to 20+1⁄2 inches (520 mm). Locomotives rebuilt with superheaters were provided with piston valves at the same time.[10]
Ownership changes
[edit]The whole class passed to the London, Midland and Scottish Railway (LMS) at the beginning of 1923, and they were subsequently numbered in two blocks. Nos. 12083–12467 (385 locomotives) comprised those operating on saturated steam, including those rebuilt with Belpaire boilers as well as those retaining round-top boilers; the two types were numbered in order of age, regardless of the boiler type. Nos. 12515–12619 (105 locomotives) comprised those built with superheaters in 1906–12 (42 locomotives) in order of age, followed by those rebuilt from saturated locomotives in 1913–22 (63 locomotives) in approximate order of rebuilding.[11][12]
It is a tribute to the soundness, usefulness and simple practicality of Aspinall's design that 300 of the class passed into the ownership of the London, Midland and Scottish Railway (LMS) and around 50 were operating in British Railways (BR) service in summer 1960. British Railways took ownership of 235 of the class in 1948 and renumbered them 52088-52529 (with gaps) by the addition of 40000 to their LMS numbers.[13]
32 locomotives were loaned to the Railway Operation Division during World War I, all of them were eventually returned once the war had ended.[14]
Preservation
[edit]One locomotive, 1895-built L&YR number 1300 (later LMS 12322 and BR 52322) has survived and is preserved at the East Lancashire Railway. It is owned by Andy Booth and its most recent overhaul was completed in 2021.
References
[edit]- ^ Longworth, Hugh ( 2005 ) British Railway Steam Locomotives 1948-1968, p. 162, ISBN 978-0-86093-593-3
- ^ Ransome-Wallis, P ( 1966 ) The Last Steam Locomotives of British Railways, p. 39, ISBN 0-7110-0475-7
- ^ Marshall 1972, pp. 86, 88, 136.
- ^ Marshall 1972, pp. 136–7, 248–256.
- ^ Marshall 1972, p. 273.
- ^ Marshall 1972, pp. 177–8, 264–5.
- ^ Marshall 1972, pp. 264–5.
- ^ Marshall 1972, pp. 142, 146, 184, 267.
- ^ Mason 1975, pp. 147–9, 167.
- ^ Marshall 1972, pp. 136, 178, 184.
- ^ Marshall 1972, pp. 248–256, 264–5, 267.
- ^ Casserley & Johnston 1974, pp. 122–4, 126–8.
- ^ Ian Allan ABC of British Railways Locomotives, 1948 edition, part 3, pp 42-43
- ^ Martian, Greg. "Railway Operating Department (ROD) Pre-Grouping Steam Locomotives Used Overseas". Rail Album. Retrieved 10 December 2020.
- Casserley, H.C.; Johnston, Stuart W. (1974) [1966]. Locomotives at the Grouping 3: London Midland and Scottish. Shepperton: Ian Allan. ISBN 0-7110-0554-0.
- Herring, Peter (2000) Classic British Steam Locomotives, Enderby: Abbeydale, p. 192, ISBN 1-86147-057-6
- Hall, Peter & Fox, Peter (2002) Preserved Locomotives of British Railways, Platform 5: Sheffield, ISBN 1-902336-30-5
- Marshall, John (1972). The Lancashire & Yorkshire Railway, volume 3. Newton Abbot: David & Charles. ISBN 0-7153-5320-9.
- Mason, Eric (1975) [1954]. The Lancashire and Yorkshire Railway in the Twentieth Century. Shepperton: Ian Allan. ISBN 0-7110-0656-3.
External links
[edit]
- Class LYR27 Details at Rail UK