Jump to content

Lancer 30 Mark V

From Wikipedia, the free encyclopedia

Lancer 30 Mark V
Development
DesignerC&C Design
LocationUnited States
Year1980
Builder(s)Lancer Yachts
RoleCruiser
NameLancer 30 Mark V
Boat
Displacement8,200 lb (3,719 kg)
Draft5.20 ft (1.58 m)
Hull
Typemonohull
Constructionfiberglass
LOA29.50 ft (8.99 m)
LWL24.00 ft (7.32 m)
Beam10.00 ft (3.05 m)
Engine typeinboard motor
Hull appendages
Keel/board typefin keel
Ballast3,000 lb (1,361 kg)
Rudder(s)internally-mounted spade-type rudder
Rig
Rig typeBermuda rig
I foretriangle height34.00 ft (10.36 m)
J foretriangle base10.80 ft (3.29 m)
P mainsail luff35.50 ft (10.82 m)
E mainsail foot13.00 ft (3.96 m)
Sails
Sailplanfractional rigged sloop
Mainsail area230.75 sq ft (21.437 m2)
Jib/genoa area183.60 sq ft (17.057 m2)
Total sail area414.35 sq ft (38.494 m2)

The Lancer 30 Mark V, also called the Lancer 30 -5, is an American sailboat that was designed by C&C Design as a cruiser and first built in 1980.[1][2][3]

The Lancer 30 Mark V is a development of the Lancer 30 Mark IV, which traces its origins to the C&C 30 molds.[1][3]

Production

[edit]

The design was built by Lancer Yachts in the United States, between 1980 and 1985, but it is now out of production.[1][3][4]

Design

[edit]

The Lancer 30 Mark V is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop rig, a raked stem; a raised counter, reverse transom; an internally mounted spade-type rudder controlled by a tiller and a fixed fin keel. It displaces 8,200 lb (3,719 kg) and carries 3,000 lb (1,361 kg) of ballast.[1][3]

The boat has a draft of 5.20 ft (1.58 m) with the standard keel.[1][3]

The boat is fitted with an inboard engine for docking and maneuvering. The fuel tank holds 24 U.S. gallons (91 L; 20 imp gal) and the fresh water tank also has a capacity of 24 U.S. gallons (91 L; 20 imp gal).[1][3]

The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin with a drop leaf table and an aft cabin with a double berth on the port side. The galley is located on the starboard side amidships. The galley is an open "L"-shape and is equipped with a two-burner stove and a double sink. The head is located on the starboard side at the companionway steps.[1][3]

The design has a hull speed of 6.57 kn (12.17 km/h).[3]

See also

[edit]

References

[edit]
  1. ^ a b c d e f g McArthur, Bruce (2020). "Lancer 30-5 sailboat". sailboatdata.com. Archived from the original on 9 July 2021. Retrieved 10 July 2021.
  2. ^ McArthur, Bruce (2020). "C&C Design 1961 - 2017". sailboatdata.com. Archived from the original on 1 March 2021. Retrieved 9 July 2021.
  3. ^ a b c d e f g h Sea Time Tech, LLC (2022). "Lancer 30-5". sailboat.guide. Archived from the original on 18 April 2022. Retrieved 18 April 2022.
  4. ^ McArthur, Bruce (2021). "Lancer Yacht Corp. (USA) 1974 - 1986". sailboatdata.com. Archived from the original on 20 June 2021. Retrieved 10 July 2021.
[edit]