Mortaio da 210/8 D.S.

Mortaio da 210/8
Mortaio da 210/8
	A Mortaio da 210/8 on a De Stefano carriage
Type	Siege howitzer
Place of origin	Kingdom of Italy
Service history
In service	1900-1945
Used by	Kingdom of Italy; Poland
Wars	World War I; Polish-Soviet War; World War II
Production history
Designer	Ansaldo
Manufacturer	Ansaldo
Produced	1900
Variants	PIAT mount; D.A. mount; D.S. mount
Specifications
Mass	5,500 kg (12,100 lb)
Barrel length	2.048 m (6 ft 9 in) L/9.7
Shell	Separate-loading, bagged charges and projectiles.
Shell weight	101.5 kg (224 lb)
Caliber	210 mm (8.26 in)
Breech	Interrupted screw breech
Recoil	Hydro-gravity
Carriage	Garrison mounts
Elevation	-15° to +70°
Traverse	360°
Rate of fire	1 round per 7–8 minutes
Muzzle velocity	340 m/s (1,115 ft/s)
Maximum firing range	8.4 km (5.2 mi)

The Mortaio da 210/8 was a siege howitzer which served with Italy during World War I and World War II.

History[edit]

The Mortaio da 210/8 was a multi-purpose weapon that could be used in a number of roles such as fortress, coastal and siege artillery. Despite the name Mortaio, the weapon was not a mortar, but rather a short-barreled howitzer (a Mörser in German terms). The 210/8 was fairly conventional for its time and most nations had similar weapons such as the Mortier de 220 mm modèle 1880, 8-inch mortar M1877 and 21 cm Mörser 99.

World War I[edit]

The majority of military planners before the First World War were wedded to the concept of fighting an offensive war of rapid maneuver which in a time before mechanization meant a focus on cavalry and light horse artillery firing shrapnel shells. Although the majority of combatants had heavy field artillery prior to the outbreak of the First World War, none had adequate numbers of heavy guns in service, nor had they foreseen the growing importance of heavy artillery once the Italian Front stagnated and trench warfare set in.^[2]

Since aircraft of the period were not yet capable of carrying large diameter bombs the burden of delivering heavy firepower fell on the artillery. The combatants scrambled to find anything that could fire a heavy shell and that meant emptying the fortresses and scouring the depots for guns held in reserve. It also meant converting coastal artillery and naval guns to siege guns by either giving them simple field carriages or mounting the larger pieces on rail carriages.^[2]

It was in these conditions that the 210/8 was deployed to give the army high-angle heavy firepower they needed to deal with Austro-Hungarian troops who occupied fortified positions in the mountains. The photos in the commons link show a number of 210/8's were captured by Austrian and German forces following the Battle of Caporetto but what use they made of them is unknown.

World War II[edit]

Some 210/8's were still in service during World War II mainly in the coastal defense role, but played little part in the war, never leaving Italy.^[3]

Design[edit]

The 210/8 was a short barreled breech-loading howitzer. The barrel was a typical built-up gun of the period with reinforcing hoops which was built from steel. The mortar had an interrupted screw breech and it fired separate-loading, bagged charges and projectiles. The 210/8 could be mounted on one of three different garrison mounts.

PIAT[edit]

The PIAT mount consisted of a U-shaped cradle which held the trunnioned barrel and a slightly inclined rectangular metal firing platform with a hydro-gravity recoil system. When the howitzer fired two hydraulic buffers at the sides of the platform slowed the recoil of the cradle which slid up a set of inclined rails and then returned the howitzer to position by the combined action of the buffers and gravity. The firing platform could traverse 30°. For transport, the howitzers on PIAT mounts could be broken down into two wagon loads, one for the howitzer/cradle and another for the wooden base. Each was towed by an artillery tractor and then reassembled for use once a spot had been leveled and the base had been assembled.^[1]

De Angelis[edit]

The De Angelis (D.A.) mount consisted of a U-shaped cradle which held the trunnioned barrel and a slightly inclined rectangular metal firing platform with a hydro-gravity recoil system. When the howitzer fired two hydraulic buffers at the sides of the platform slowed the recoil of the cradle which slid up a set of inclined rails and then returned the howitzer to position by the combined action of the buffers and gravity. The firing platform had two small wheels at the front and two larger wheels at the rear which rotated on a crescent-shaped steel rail that was fixed to a wooden base and gave 90° of traverse. For transport, the howitzers on De Angelis mounts could be broken down into two wagon loads, one for the howitzer/cradle and another for the metal firing platform. Each was towed by an artillery tractor and then reassembled for use once a spot had been leveled and the wooden firing base had been assembled.^[4]

De Stefano[edit]

The De Stefano (D.S.) carriage consisted of a U-shaped cradle which held the trunnioned barrel. The cradle then sat on top of a 4-wheeled box-trail carriage with two non-steerable wheels at the front and two castering wheels at the rear. The De Stefano carriage had a type of double-recoil system. When the howitzer fired the recoil was partially absorbed by two hydraulic recoil buffers at the front of the cradle with the remaining recoil transmitted to the wheels of the carriage which rolled up a set of inclined steel rails and then back into firing position by gravity.

For travel, the howitzers on De Stefano mounts could be broken down into two loads. A tow bar could was attached to the castoring wheels on the rear of the carriage and towed in one piece by an artillery tractor. The wheels could be fitted with detachable grousers designed by the Italian major Crispino Bonagente for traction on soft ground and these consisted of eight rectangular plates connected with elastic links and are visible in many photographs of World War I artillery from all of the combatants. The second wagon load was for the wooden base and the steel rails for the firing platform. This was also towed by an artillery tractor and then reassembled once a spot had been leveled and the wooden firing base had been assembled. The wooden base and rails allowed 360° of traverse. This same basic De Stefano carriage was scaled to mount a variety of large caliber fortress, coastal and naval artillery pieces as large as 305 mm (12 in).^[4]

Photo Gallery[edit]

210/8 D.A. mortars in the Val Dogna during World War I.
The details of the D.A mount.
A 210/8 D.S. in traveling position with Bonagente groussers that was captured after the Battle of Caporetto.
The details of the D.S mount.
An Obice da 305/17 on a De Stefano carriage. Notice the similarity in concept.

References[edit]

^ ^a ^b ^c ^d "Regio Esercito - Materiale bellico - Mortaio da 210/8". www.regioesercito.it. Retrieved 2018-10-05.
^ ^a ^b Hogg, Ian (2004). Allied artillery of World War One. Ramsbury: Crowood. pp. 129–134. ISBN 1861267126. OCLC 56655115.
^ Chamberlain, Peter (1975). Heavy artillery. Gander, Terry. New York: Arco. p. 33. ISBN 0668038985. OCLC 2143869.
^ ^a ^b "Landships II". www.landships.info. Retrieved 2018-10-05.

External links[edit]

[:3-1] "Regio Esercito - Materiale bellico - Mortaio da 210/8". www.regioesercito.it. Retrieved 2018-10-05.

[:0-2] Hogg, Ian (2004). Allied artillery of World War One. Ramsbury: Crowood. pp. 129–134. ISBN 1861267126. OCLC 56655115.

[:1-3] Chamberlain, Peter (1975). Heavy artillery. Gander, Terry. New York: Arco. p. 33. ISBN 0668038985. OCLC 2143869.

[:2-4] "Landships II". www.landships.info. Retrieved 2018-10-05.

[1]

[2]

[3]

[4]

v t e Italian artillery of World War I
Anti-aircraft guns	Cannone da 76/45 S 1911 Cannone da 75/27 A.V.
Field, Medium and Heavy guns	Cannone da 75/27 modello 06 Cannone da 75/27 modello 12 Cannone da 75/27 modello 11 8 cm FK M. 5 Obice da 100/17 modello 14 Obice da 105/14 Cannone da 105/28 Cannone da 105/32 Obice da 149/12 Cannone da 149/23 Cannone da 149/35 A Cannone da 152/45
Mortars	Bombarda da 58 A Bombarda da 58 B 15 cm Mörser M1881 Bombarda da 240 mm
Infantry and Mountain guns	Cannon 37F Cannone da 65/17 modello 13 Cannone da 76/17 S modello 12 Cannone da 70/15
Naval and coastal defense guns	Cannon 76/40 Model 1916 Cannone da 76/45 S 1911 Cannon 102/35 Model 1914 Cannon 102/45 Cannon 152/32 Model 1887 Cannone da 190/45 EOC 8 inch 45 caliber EOC 10 inch 40 caliber EOC 10-inch /45 naval gun Obice da 280 305 mm /46 Model 1909 100-ton gun BL 13.5 inch naval gun Mk I – IV Cannone navale da 381/40
Railroad artillery	Cannone da 381/40 AVS
Superheavy and Siege artillery	Mortaio da 210/8 D.S. Mortaio da 210/9 modello 14 Mortaio da 260/9 Modello 16 Obice da 280 Obice da 305/17

v t e Italian artillery of World War II
Tank guns	Breda Model 35 Cannone da 37/40 Cannone da 47/32 Cannone da 47/40 Cannone da 75/34
Anti-tank guns	Solothurn S-18/1000 Cannone da 47/32 Obice da 75/18 modello 35 Cannone da 75/46 C.A. modello 34 Cannone da 90/53 Cannone da 105/25
Infantry and Mountain guns	Cannone da 37/10 modello 15 Cannone da 47/32 Cannone da 65/17 modello 13 Cannone da 70/15 Obice da 75/18 modello 34
Field, Medium and Heavy guns	Cannone da 75/27 modello 06 Cannone da 75/27 modello 12 Cannone da 75/27 modello 11 Obice da 75/18 modello 35 Cannone da 75/32 modello 37 Cannone da 76/17 S modello 12 Obice da 100/17 modello 14 Obice da 105/14 Cannone da 105/28 Cannone da 105/32 Obice da 149/12 Cannone da 149/28 Cannone da 149/35 A Cannone da 149/40 modello 35 Obice da 149/19 modello 37 Cannone da 152/45 Obice da 210/22
Superheavy and Siege artillery	Mortaio da 210/8 D.S. Mortaio da 260/9 Modello 16 Obice da 280 Obice da 305/17
Railroad artillery	Cannone navale da 381/40
Anti-aircraft guns	Cannone-Mitragliera da 20/77 (Scotti) Breda Model 35 Cannone-Mitragliera da 37/54 (Breda) Cannone da 75/27 A.V. Cannone da 75/46 C.A. modello 34 Cannone da 75/49 Cannone da 90/53