Jump to content

NER Class 3CC

From Wikipedia, the free encyclopedia

NER Class M
NER Class 3CC
LNER Class D19
Type and origin
Power typeSteam
DesignerWilson Worsdell
BuilderNER Gateshead
Build date1893
Total produced1
Rebuild date1898
Specifications
Configuration:
 • Whyte4-4-0
 • UICNew: 2′B n2v
Rebuilt: 2′B n3v
Gauge4 ft 8+12 in (1,435 mm)
Leading dia.3 ft 7+14 in (1,099 mm)
Driver dia.7 ft 1+14 in (2,165 mm)
WheelbaseLoco: 23 ft 6 in (7.16 m)
Tender: 12 ft 8 in (3.86 m)
Total: 45 ft 8+34 in (13.94 m)
Axle load20 long tons 0 cwt (44,800 lb or 20.3 t)
Loco weight53 long tons 6 cwt (119,400 lb or 54.2 t)
Tender weight41 long tons 4 cwt (92,300 lb or 41.9 t)
Total weight94 long tons 10 cwt (211,700 lb or 96 t)
Firebox:
 • Grate area23.4 sq ft (2.17 m2)
Boiler4 ft 6 in (1.37 m) diameter
Boiler pressure160 psi (1.10 MPa)
Heating surface:
 • Firebox120 sq ft (11 m2)
 • Tubes1,170 sq ft (109 m2)
 • Total surface1,290 sq ft (120 m2)
CylindersThree: one inside high-pressure; two outside low-pressure
High-pressure cylinder19 in × 26 in (483 mm × 660 mm)
Low-pressure cylinder22 in × 26 in (559 mm × 660 mm)
Valve gearStephenson
Performance figures
Tractive effort14,504 lbf (64.52 kN)
Career
OperatorsNER » LNER
Numbers1619
Withdrawn1930
DispositionScrapped

The NER Class 3CC (LNER Class D19) was a 4-4-0 steam locomotive designed by Wilson Worsdell for the North Eastern Railway and built in 1893. Only one was built (number 1619) and it was a compound expansion version of the simple expansion NER Class M1. The 3CC was originally classified M but was re-classified 3CC in 1914, at the same time as the M1 was re-classified M.

Overview

[edit]

Number 1619 was built as a Worsdell-von Borries compound with two inside cylinders. In 1898, it was rebuilt as a three-cylinder compound with one inside high-pressure cylinder and two outside low-pressure cylinders, as a test-bed for the development of Walter Mackersie Smith's ideas.

Classification

[edit]

Aside from its compound expansion, the 3CC was similar to several other NER classes and they are summarised here:

Original NER class 1914 NER class LNER Class Cylinders Driving wheels
M1 M D17/1 (2) 19″ x 26″ 7′ 1¼″
Q D17/2 (2) 19½″ x 26″ 7′ 1¼″
Q1 D18 (2) 19½″ x 26″ 7′ 7¼″
M (new) HP (1) 20″ x 26″
LP (1) 28″ x 26″
7′ 1¼″
M (1898) 3CC D19 HP (1) 19″ x 26″
LP (2) 20″ x 26″
7′ 1¼″
  • HP = high-pressure cylinder, LP = low-pressure cylinders

Operations

[edit]

Around 1907 the Class 3CC locomotive was allocated from the Leeds area to Hull Botanic Gardens engine shed where it generally worked fast trains between Hull Paragon railway station and Bridlington. In 1926 it was transferred to Bridlington although its duties remained unchanged until withdrawal in October 1930.[1]

Accident

[edit]

On 31 March 1920, the Class 3CC locomotive was derailed at York station whilst hauling a passenger train.[2]

Legacy

[edit]

Number 1619 was a one-off but W. M. Smith went on to develop a four-cylinder compound system in the NER Class 4CC (LNER Class C8) 4-4-2 locomotive. Number 1619 was withdrawn in 1930 and was not preserved.

Smith's three-cylinder compound system was also used in the Great Central Railway classes 8D and 8E (LNER Class C5) 4-4-2s and achieved its greatest success in the Midland Railway 1000 Class and the LMS Compound 4-4-0. The Great Northern Railway (Ireland)'s class V was also a Smith compound.

References

[edit]
  1. ^ Yeadon 1995, p. 72
  2. ^ Hoole, Ken (1982). Trains in Trouble: Vol. 3. Redruth: Atlantic Books. p. 24. ISBN 0-906899-05-2.

Sources

[edit]
  • Yeadon, W B (1995). More illustrated history of the railways of Hull. Nottingham, UK: Callenger Publications. p. 72. ISBN 1-899624-25-2.

Further reading

[edit]