Jump to content

RD-0110R

From Wikipedia, the free encyclopedia
RD-0110R
The four nozzles of the RD-0110R surround the large single nozzle of the NK-33 engine on the first stage of the Soyuz-2-1v.
Country of originRussia
First flight2013-12-28
DesignerKBKhA,[1] Viktor Gorokhov[2]
ManufacturerVoronezh Mechanical Plant[2]
Application1st stage vernier engine
Associated LVSoyuz-2-1v[1]
PredecessorRD-0110[1]
StatusIn Production
Liquid-fuel engine
PropellantLOX[1] / RG-1[1]
CycleGas Generator[1]
Configuration
Chamber4[1]
Performance
Thrust, vacuum265.1 kilonewtons (59,600 lbf)[1]
Thrust, sea-level230.5 kilonewtons (51,800 lbf)[1]
Chamber pressure6.6 megapascals (960 psi)[1]
Specific impulse, vacuum298.4 seconds[1]
Specific impulse, sea-level259.4 seconds[1]
Burn time210s[1]
Dimensions
Length1,910 millimetres (75 in)[1]
Diameter2,675 millimetres (105.3 in)[1]
Dry mass850 kilograms (1,870 lb)[1] (including the support ring)
Used in
Soyuz-2-1v first stage.

The RD-0110R (Russian: Ракетный Двигатель-0110R, romanizedRaketnyy Dvigatel-0110R, lit.'Rocket Engine 0110R', GRAU index: 14D24) is a rocket engine burning kerosene in liquid oxygen in a gas generator combustion cycle. It has four nozzles that can gimbal up to 45 degrees in a single axis and is used as the vernier thruster on the Soyuz-2-1v first stage.[1] It also has heat exchangers that heat oxygen and helium to pressurize the LOX and RG-1 tanks of the Soyuz-2.1v first stage, respectively. The oxygen is supplied from the same LOX tank in liquid form, while the helium is supplied from separate high pressure bottles (known as the T tank).[1]

The engine's development started in 2010 and it is a heavily modified version of the RD-0110. The main areas of work were shortening the nozzles to optimize them for the atmospheric part of the flight (the RD-0110 is a vacuum optimized engine), propellant piping, heat exchangers and the gimballing system, which was developed by TsSKB Progress. The RD-0110R engine is produced at the Voronezh Mechanical Plant.[2]

See also

[edit]
  • Soyuz-2-1v - The first rocket to use the RD-0110R
  • KBKhA - The RD-0110R designer bureau
  • RSC Progress - The designer of the Soyuz-2.1v and the RD-0110R nozzle gimbal
  • Voronezh Mechanical Plant - A space hardware manufacturer company that manufactures the RD-0110R

References

[edit]
  1. ^ a b c d e f g h i j k l m n o p q r "Steering engine RD0110R (14D24). Carrier rocket "Soyuz-2-1v"" (in Russian). KBKhA. Archived from the original on 11 August 2013.
  2. ^ a b c Zak, Anatoly. "RD-0110R". russianspaceweb.com. Retrieved 2015-06-01.
[edit]