Jump to content

S5/8

From Wikipedia, the free encyclopedia

S5/8 was a serial communications standard devised in the United Kingdom in the 1980s as a simplified subset of RS-232 intended to make interoperability easier. Although published by the British Standards Institution as standard DD 153:1990, it was not widely adopted, and the BSI standard was later withdrawn.

Description

[edit]

S5/8 differed from RS-232 in using 0 and +5 V signalling levels, simplified handshaking, and a fixed data transfer rate of 9600 bits per second. An 8-pin DIN 45326 connector was specified as standard, although a physically compatible 180-degree 5-pin DIN connector could be used to carry a subset of the signals. Data transmission consisted of frames containing one start bit, 8 data bits and one stop bit, with no parity bit.

Two classes of device were specified, D and S. D-devices could supply power (5 V up to 20 mA) at the connector, whereas S-devices could derive power from a connected D-device.

Pin assignment

[edit]
Number Name Description
1 DINP Data input
2 GROUND Signal ground
3 DOUT Data output
4 HINP Handshake input
5 HOUT Handshake output
6 SINP Secondary input
7 SOUT Secondary output
8 V+ +5 volts

Applications

[edit]

The S5/8 standard was adopted by a few British microcomputers, such as the Thorn EMI Liberator and the CST Thor XVI, as well as some versions of MSX computers, such as Yamaha CX11 and YIS-503 and its derivatives, the Sakhr MSX series.

References

[edit]
  • Smith, Tony (14 November 2012). "Liberator: the untold story of the first British laptop (part 2)". The Register. Retrieved 1 March 2013.
  • Tooley, Michael (1997). Newnes Data Communications Pocket Book. Newnes. pp. 107–108. ISBN 9780750628846. Retrieved 1 March 2013.
  • S5/8 serial interface for the interconnection of data processing equipment. British Standards Institution. 1990. ISBN 0-580-18001-8. Retrieved 1 March 2013.