Supercritical carbon dioxide blend
Supercritical carbon dioxide blend (sCO2 blend) is an homogeneous mixture of CO2 with one or more fluids (dopant fluid) where it is held at or above its critical temperature and critical pressure.[1]
Carbon dioxide behaves as a supercritical fluid above its critical temperature (304.13 K, 31.0 °C, 87.8 °F) and critical pressure (7.3773 MPa, 72.8 atm, 1,070 psi, 73.8 bar), expanding to fill its container like a gas but with a density like that of a liquid.[2]
By combining CO2 with other fluids, the critical temperature and critical pressure of the mixture can be modified. The s-CO2 blend is usually designed to increase the mixture supercritical temperature to employ the s-CO2 in power cycles, obtaining increased energy conversion efficiency.[3]
Applications[edit]
Power generation[edit]
Despite the development of new electricity generation technologies, most power plants are thermal power stations, meaning that they use a heat source (solar thermal, nuclear power, fossil fuel, biomass, Incineration, geothermal) to produce electricity. Although this process can be achieved directly by using the seebeck effect, the power conversion efficiency is greatly increased by using a power cycle. Traditionally, power plants are based on Rankine cycle and use steam turbines for electricity generation. The efficiency of the power cycle is limited by the temperature difference between the heat source and the heat sink. The greater the differential, the more electricity can be produced. Replacing steam by supercritical carbon dioxide allows reaching a higher temperature differential, therefore increasing the power efficiency of the power plant.[3]
Supercritical state facilitates the heat exchange at the heat source. Furthermore, supercritical carbon dioxide is twice as dense as steam, and the combination of high density and volumetric heat makes it a high energy dense fluid, meaning that the size of most components of the thermodynamic cycle can be reduced. Therefore, the ecological footprint of the plant and the capital expenditure are considerably reduced. In addition, sCO2 is non-flammable, non-toxic, non-explosive and cheap.[4] Efficiency can be further increased employing a combined cycle.[5]
One of the main limitations that has delayed the massive use of carbon dioxide in power cycles is the corrosion engineering. Materials for the fluid transport and power generation must display high resistance to high temperature, corrosion and creep.
Concentrated Solar Power[edit]
Concentrated solar power (CSP) is a solar thermal technology that uses mirrors or lenses to concentrate sunlight into a receiver.[6] The receiver reaches very high temperatures, up to 1000 °C for commercial solar power towers, favouring high power conversion efficiency. However, electricity production is limited by the heat engine used.[3]
In the Concentrated Solar Power sector, using supercritical CO2 as the heating engine fluid can provide a significant cost reduction. The higher efficiency of the power block reduces the solar field size, decreasing the soil occupation and therefore the cost of this part of the plant. According to the available analyses, electricity production costs of conventional supercritical CO2 CSP are expected to be 9,5–10 $ cent/KWh in favorable conditions.[7] In addition, Concentrated Solar Power offers the possibility of directly recovering solar radiation without using any intermediate energy carrier. However, this poses challenges in the design of high pressure solar receivers, that must held pressures above the critical pressure of the fluid, as well as energy storage systems.[8]
Efficient supercritical CO2 power cycles requires that the compressor inlet temperature is close to, or even lower than, the critical temperature of the fluid (31 °C for pure carbon dioxide). When this target is reached, and the heat source is higher than 600–650 °C, then the sCO2 cycle outperforms any Rankine cycle running on water/steam with the same boundary conditions.[9]
Because of the weather conditions in arid sites where Concentrated Solar Power plants are usually located, with ambient temperatures above 35 °C, it is impossible to cool down CO2 enough to compress the fluid with low energy requirements. Accordingly, the rapid transition to an almost ideal behavior of carbon dioxide when temperature increases to 40 °C or above increases compression work and reduces the thermal efficiency of the power block, which can only be increased again through a large increase of turbine inlet temperature. To overcome these thermodynamic problems, a supercritical CO2 blend with a higher critical temperature could be employed.[10] The critical temperature of several sCO2 blends has been studied. For example, a mixture that reaches a critical temperature of 80 °C can provide high efficiency for heat sink temperatures up to 50 °C.[9]
| Dopant fluid (%molar) | Molar weight (g/mol) | Critical temperature (°C) | Critical pressure (bar) |
|---|---|---|---|
| C6F6 (10) | 58.21 | 80.28 | 112.4 |
| C6F6 (15) | 65.32 | 102.1 | 121.3 |
| C6F6 (20) | 72.42 | 121.9 | 123.6 |
| TiCl4 (15) | 65.86 | 93.76 | 190.9 |
| TiCl4 (20) | 73.15 | 149.6 | 243.7 |
SCARABEUS project, which has received funding from the European Union, formulates a new conceptual approach to implement supercritical carbon dioxide blends in Concentrated Solar Power Plants to reduce operating and capital costs by increasing the power cycle efficiency. The SCARABEUS project is developed by a consortium of European universities (Politecnico di Milano and Università degli Studi di Brescia from Italy, Technische Universität Wien from Austria, Universidad de Sevilla from Spain and University of London from United Kingdom) and private companies(Kelvion from Germany, Baker Hughes from United States and Abengoa from Spain) with experience in Concentrated Solar Power.[11][12]
See also[edit]
References[edit]
- ^ "Supercritical CARbon dioxide/Alternative fluids Blends for Efficiency Upgrade of Solar power plant". ResearchGate.
- ^ Span, Roland; Wagner, Wolfgang (November 1, 1996). "A New Equation of State for Carbon Dioxide Covering the Fluid Region from the Triple-Point Temperature to 1100 K at Pressures up to 800 MPa". Journal of Physical and Chemical Reference Data. 25 (6): 1509–1596. Bibcode:1996JPCRD..25.1509S. doi:10.1063/1.555991. ISSN 0047-2689.
- ^ a b c Binotti, Marco; Di Marcoberardino, Gioele; Iora, Paolo; Invernizzi, Costante Mario; Manzolini, Giampaolo (October 4, 2019). "Supercritical carbon dioxide/Alternative fluids blends for efficiency upgrade of solar power plant". Conference Proceedings of the European Sco2 Conference3Rd European Conference on Supercritical Co2 (Sco2) Power Systems 2019: 19Th-20Th September 2019. University Of Duisburg-Essen DuEPublico: Duisburg-Essen Publications Online: 222–229. doi:10.17185/DUEPUBLICO/48892.
- ^ Patel, Sonal (April 1, 2019). "What Are Supercritical CO2 Power Cycles?". POWER Magazine. Retrieved December 15, 2022.
- ^ "Combined cycles – techouse". Archived from the original on December 15, 2022. Retrieved December 15, 2022.
- ^ Kraemer, Susan (June 11, 2018). "How CSP Works: Tower, Trough, Fresnel or Dish". SolarPACES. Retrieved December 7, 2022.
- ^ María, Sánchez Martínez, David Tomás Sánchez Lencero, Tomás Manuel Universidad de Sevilla. Departamento de Ingeniería Energética Crespi, Francesco (February 11, 2020). Thermo-economic assessment of supercritical CO2 power cycles for concentrated solar power plants. OCLC 1240072375.
{{cite book}}: CS1 maint: multiple names: authors list (link) - ^ Marchionni, Matteo; Bianchi, Giuseppe; Tassou, Savvas A. (March 11, 2020). "Review of supercritical carbon dioxide (sCO2) technologies for high-grade waste heat to power conversion". SN Applied Sciences. 2 (4): 611. doi:10.1007/s42452-020-2116-6. hdl:11584/361939. ISSN 2523-3971. S2CID 216291655.
- ^ a b Crespi, Francesco; Sánchez, David; Martínez, Gonzalo S.; Sánchez-Lencero, Tomás; Jiménez-Espadafor, Francisco (July 22, 2020). "Potential of Supercritical Carbon Dioxide Power Cycles to Reduce the Levelised Cost of Electricity of Contemporary Concentrated Solar Power Plants". Applied Sciences. 10 (15): 5049. doi:10.3390/app10155049. ISSN 2076-3417.
- ^ a b F. Crespi, G. S. Martínez, P. Rodriguez de Arriba, D. Sánchez, F. Jiménez-Espadafor (2021). "Influence of Working Fluid Composition on the Optimum Characteristics of Blended Supercritical Carbon Dioxide Cycles". Volume 10: Supercritical CO2. ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition. doi:10.1115/gt2021-60293. ISBN 978-0-7918-8504-8. S2CID 239400871. Retrieved December 15, 2022.
{{cite book}}:|website=ignored (help)CS1 maint: location (link) CS1 maint: location missing publisher (link) CS1 maint: multiple names: authors list (link) - ^ EU Publication Office. "Supercritical CARbon dioxide/Alternative fluids Blends for Efficiency Upgrade of Solar power plants". CORDIS. doi:10.3030/814985.
- ^ "Scarabeusproject". Retrieved December 7, 2022.