Jump to content

Talk:Coulomb's law

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia


Untitled

[edit]

Am I correct in translating my physics book's ambiguous claim that the "charges must be small" as meaning the two objects must have small volume?

Even if this is correct, can someone clarify what "small volume" means? On one hand, the implication seems to be, the smaller the volume of the two substances/objects/particles, the more correctly the Law will predict the forces acting on them. So perhaps we could reformulate Coulomb's Law as a statement along the lines of "as the limit of the particles' volumes goes to 0..." But if this is so, how are we to think about the lowest levels of matter, where everything seems to be quantized, not continuous?

Finally, I don't suppose there's a handy expression for how accurate one can expect Coulomb's Law (or other such laws) to be, given the size of the substances involved? How does the day-to-day engineering question of "Is Coulomb's Law accurate enough for my particular use?" get answered? (Or perhaps Coulomb's law, by itself, isn't useful in a day-to-day sense....)

Coulombs law is usually stated as giving the force on a small test charge. This simply means that the field due to the test charge should be weak enough not to significantly change the charge distribution producing the original field. DJIndica 07:10, 2 January 2006 (UTC)[reply]

Use of Coulomb's Law

[edit]

You're right. Stictly speaking Coulomb's law is only valid for (unphysical) point particles. For extended shapes you need to treat the object as an infinite number of infinitely small charges. Once you've broken down the shapre this way, integration yields the actual forces on the object. For charged non-conducting spheres, it happens that the Coulomb's law gives exact results.

What I described above is the classical answer, and gives excellent results for volumes that are a few orders larger than atoms, and charges that are a few orders larger than the charge of the electron. Once you want to start talking about very small distances or charges, you get into really awful and messy quantum mechanics.

In typical applications Coulombs law is a very useful approximation. Anytime you're dealing with objects you can hold (even if you need tweezers), and the objects are separated by (say) ten or one hundred times the larger of thier radii, Coulomb's law will give good results. If your objects have reasonably spherical shapes (say cubes, octohedrons, etc...), you'll get good results even closer.

--JeffVaughan 16:38, 29 Sep 2004 (UTC)

Media other than Vacuum

[edit]

The article is very misleading and actually false in not stating that the equation given for the force between charges is only true if the medium in which the charges are immersed is vacuum. Since many other media could exist the formula should be generalised by including the relative permittivity of the medium as a factor in the equation. The same objection applies to the equation for field in the vicinity of a point charge. It strikes me that to assume that the medium is always vacuum is a very childish and unrealistic position to adopt —Preceding unsigned comment added by 82.32.49.157 (talk) 17:55, 26 March 2011 (UTC)[reply]

I fully endorse this. It seems to me that this article adopts a characteristically narrow school-masterly point of view from which all electrostatic experiments are conducted in vacuum, all capacitors are intially discharged, all forces are parallel to displacements, etc, etc. This unrealistic view of the world is not even a good thing to teach to children, and I feel we are entitled to expect better from Wikipedia. I have edited the text somewhat, but feel that it should actually be revised by the original author if he or she is competent to do it. — Preceding unsigned comment added by 82.32.50.178 (talk) 09:27, 21 February 2013 (UTC)[reply]

Units of coulomb's constant

[edit]

Unless I'm mistaken, the units for coulombs constant are exactly the opposite of what they should be, i.e. rather than C^2*N^(-1)*m^1, it should be N*C^(-2)*m^(-1).

I don't know about the other units (F m^(-1) or whatever), though, so I'll leave it for the moment. 81.226.53.55

You are obviously right, and the units including farads are inverted as well. I changed it in the constant k, which obviously should have the inverse of the units of ε0. Was this the only place with the problem? Gene Nygaard 22:53, 16 Feb 2005 (UTC)

i dunno why it was necessary to introduce in place of , but since it was done, the units on should be the reciprocal of . in addition, the symbol can be confused by some to be the Boltzmann constant, which is why i don't think it should be there at all. also, Gene, why do you think "esu of charge " is necessary. esu is a unit of charge, synonymous with statcoulomb, although it is dimensionally defined in terms of base cgs units. i don't think the article was improved with the last 2 or 3 edits. r b-j 23:51, 16 Feb 2005 (UTC)

No, "esu" was used to identify any electrostatic unit; there were "esu of charge" and "esu of current" and "esu of induction flux" and "esu of magnetic field intensity" and "esu" of many other things. Gene Nygaard 00:24, 17 Feb 2005 (UTC)
okay, then we should just say statcoulomb for the cgs version of Coulomb's law. r b-j 04:12, 17 Feb 2005 (UTC)


A note on -- in many introductory textbooks, this constant is given as the numerical version rather than the version, so giving it as both is not a bad idea. As for the confusion with the Boltzmann constant, many letters and symbols are used to mean more than one thing in physics, and if we refrained from using the same leters or symbols over and over again, we would have run out of letters and symbols by the end of mechanics. (Remember, k also stands for the spring constant) It's just a matter of paying attention to what you are studying and knowing which constant they mean. K of slinky 22:55, 9 Sept 2005 (UTC)


The correct units are N m^2 C^{-2}. Also, since the Coulomb constant is defined in terms of the speed of light and the permeability of free space (both of which are known exactly) it's possible to compute the exact value of the Coulomb constant. I've put the exact value (c^2/10^7) in the article. SimpsonDG (talk) 04:36, 31 January 2011 (UTC)[reply]

Other article?

[edit]

What's the relation between this article and Coulomb barrier? Should they at least link to one another? -- Tarquin 12:51, 10 Mar 2005 (UTC)

Symbol for permittivity

[edit]

Rbj, why do you put regular epsilon for the permittivity constant? I see nothing but the varepsilon symbol except on the Wolfram science website. --Yath 05:54, 12 Mar 2005 (UTC)

NIST uses a graphic version of that dimpled variant, with alt=" $\varepsilon_0$, at http://physics.nist.gov/cgi-bin/cuu/Value?ep0%7Csearch_for=electric+constant
But what I'm wondering is why, if you are so nitpicky about the shape of the epsilon, you aren't also jumping in to change the obsolete "permittivity" to "electric constant"? Gene Nygaard 06:10, 12 Mar 2005 (UTC)
Because I'm not aware of any overriding authority that can be cited to definitively set the symbol and/or name of this value. I'm going by usage, which seems (and I could be wrong) to be varepsilon for the symbol, and "permittivity of free space" for the name.
So I'm waiting to see if Rbj or someone knows of an authority that people should follow, like the BIPM or something. --Yath 16:16, 12 Mar 2005 (UTC)
i'll do a survey of usage from online and printed references. my EE fields text and my undergrad physics texts use the symbol . i think also NIST. i don't think i ever edited physical constants and they use the same symbol. frankly i don't care but it should be utterly self-consistent and mostly consistent with the usage in the literature. r b-j 22:58, 12 Mar 2005 (UTC)


NIST is kinda funny. if you go to [1] , you get it Yath's version, if you hit the symbol to get its definition in terms of more fundamental constants, you get [2] , which is what i have been saying. it would be nice if, even they could be self-consistent. their PDF of physical constants has it like . r b-j 23:08, 12 Mar 2005 (UTC)

In Talk:Speaker_wire someone mentioned Coulomb's law in reference to wire length. Does this law apply here, or is it out of context? Lowmagnet 21:52, 25 March 2006 (UTC)[reply]


== Headline text

Point Source used in definition is not defined anywhere

[edit]

Coulomb's "law" used pith balls and assumed the charge on them could be represented as a point source. There is no definition of point source within Wiki. If I were to add a definition, then it would be that of a mathematical point and I would remove the word source. Bvcrist 20:26, 24 August 2006 (UTC)[reply]

point soure or piont charge is that which is apply force` and test charge or force is that which test charge

k vs. 1/4*pi*Enaught

[edit]

I've read that the reason k is replaced with 1/4*pi*Enaught is to simplify other formulas and for historical reasons. Can anyone elaborate on this point in the article? I'm interested as to why this is true.

The inclusion of 4pi as a separate factor rather than conflating it with the SI value of epsilon-nought is a characteristic which distinguished the rationalised MKS system from the original MKS system. It is in fact the eponymous rationalisation. The rationalised MKS later evolved into the SI. The reason for separating out the factor 4pi was so that a factor of 4pi or pi would be present in applications which have spherical or circuilar symmetry (as in the present topic of discussion, the force between isolated charges being independent of the direction of r) and absent from those without such symmetries. For example the formula for the capacitance of a coaxial capacitor includes a factor of pi, whereas that for a parallel plate capacitor does not. A factor of pi appears in places where it seems appropriate, and is absent when intuition suggests it is inappropriate. —Preceding unsigned comment added by 82.32.49.157 (talk) 18:10, 26 March 2011 (UTC)[reply]

Trying to figure out electrostatic force without a recursive definition....

[edit]

I was reading the overview for Coulomb's law, and the first sentance describes how it indicates 'electrostatic force', which is an article that redirects itself to Coulomb's law. Is it just me or is that a little recursive? Or am I way over my head and it is like when the dictionary says that 'redness' is something which exhibits the characteristic of red, for example? Rhetth 16:28, 28 December 2006 (UTC)[reply]

Analogous to huh?

[edit]

This may be nitpicking, but in the third paragraph, I don't see how Coulomb's law is 'analogous' to Newton's third law. Perhaps in the sense that the force on charge A by charge B is equal and opposite to the force on charge B by charge A. But this is not analogous to Newton's third, it's due to Newton's third. I'd say the analogy would be between Coulomb's law and Newton's law of gravitation. --Chetvorno 23:20, 17 July 2007 (UTC)[reply]

Newton

[edit]

for my point of view it is absolutely not necessary to state anything about "newton" here, esp. not in the introduction. the said about "photons" is also useless. all this following:

" This is analogous to Newton's third law of motion in mechanics. The formula of Coulomb's law is of the same form as Newton's gravitational law: The electrical force of one body exerted on the second body is equal to the force exerted by the second body on the first. Coulomb's law is the mathematical consequence of law of conservation of linear momentum in exchange by virtual photons in 3-dimensional space (see quantum electrodynamics). "

can be deleted without loosing any information. --Pediadeep 13:07, 29 August 2007 (UTC)[reply]

Extra info in "Electrostatic Approximation"

[edit]

The statement about the accuracy being accurate to within one part in a billion is nice, but it really doesn't go here, and I'm not sure where else it would fit. It's also not sourced. I favor deleting it. Any other opinions? Peppergrower 06:47, 17 October 2007 (UTC)[reply]

I am pretty certain that it is essentially correct, and this test of the exponent in the equation should be somewhere in the article. /Pieter Kuiper 07:49, 17 October 2007 (UTC)[reply]
Here is the reference: William, Faller, Hill (1971) /Pieter Kuiper 08:05, 17 October 2007 (UTC)[reply]

superconduction re BCS theory

[edit]

There's nothing here about the exceptions that allow superconductivity. 24.68.233.40 (talk) 01:06, 4 May 2008 (UTC)[reply]

I don't know much about BCS theory, but I don't think it has exceptions to Coulomb's law. I believe it adds additional forces between electrons, but leaves the standard electrical repulsion. Foobaz·o< 04:07, 4 May 2008 (UTC)[reply]

error?

[edit]

I believe there is an error in the integral under "continuous charge distribution". The integral should be multiplied by. I'm not 100% sure if i'm right, so I'm going to leave it to someone else to fix it.Sghatch (talk) 16:24, 17 June 2009 (UTC)[reply]

Coulomb's Law and Newton's Law

[edit]

Does anyone else notice a rather large similarity between and ?

Both are to the inverse of the square of the radius (by virtue of three-dimensional space), both are the products of a constant (I'll get to that in a moment) and the values of the two "attributes", and the constant is reflective of the strengths of the forces? And that the sign of the attributes (mass or charge) affects the directionality of the force? Is this not rather good evidence for unification? -RadicalOneContact MeChase My Tail 5:24, 28 January 2010 (UTC)

Technically, to be consistent, there should be a minus sign on the right-hand side of the second equation (Newton's law of gravity), so that in both equations a negative force indicates attraction. The difference in signs of the two equations reflects the fact that two positive masses attract, while two positive charges repel. SimpsonDG (talk) 04:26, 31 January 2011 (UTC)[reply]

Coulomb's predecessors

[edit]

A number of reliable sources claim that ca. 1760, Daniel Bernoulli discovered Coulomb's law. Many other reliable sources claim that in 1769, Dr. John Robison of Edinburgh, Scotland also discovered Coulomb's law. However, no source provides a citation for these claims. But I'll keep looking.Cwkmail (talk) 11:45, 29 August 2011 (UTC)[reply]

Atomic forces

[edit]

In the beginning it says: "Coulomb's law states that: "The magnitude of the Electrostatics force of interaction between two point charges is directly proportional to the scalar multiplication of the magnitudes of charges and inversely proportional to the square of the distances between them.""

Then on the section on atomic forces it says: "Coulomb's law holds even within the atoms, correctly describing the force between the positively charged nucleus and each of the negatively charged electrons."

Is it really appropriate to treat the nucleus and the electrons as point charges ? Are there more accurate ways to calculate the electromagnetic force between quarks and electrons ? A link would be useful here.Forcefield2 (talk) 17:41, 3 October 2011 (UTC)[reply]

by SineBot-->

Copyedit of The Law section

[edit]

I tried to make the first three paragraphs consistent in the following regards:

  • math equations are now Tex for the main, article-subject, stand-out ones, and HTML for the inline ones.
  • the caption of the diagram needed explaining because the symbols are inconsistent and possibly even |confusing|
  • math symbols F, E, r, k, c, q, μ and ε look like the Tex ones (almost)

I think it's MOS compliant.

I also

  • moved the descriptive paragraph stating the law to the top.
  • removed the wording that almost said 'size of a point'. 'Point charges' is easily intuited.
  • moved some sentences around and changed a few words and phrases
  • fixed a broken link and added a new link

Hope that helps. Happy editing! — CpiralCpiral 00:18, 15 August 2012 (UTC)[reply]

I reverted some of the many changes IngenieroLoco made. I liked some of them, but either misunderstand or did not like others of them. They are all in the history logs. Let's discuss, please. Let's all use edit summaries. Let's return some of the changes afterwords, after explanations and reasonings beside, as they just now seemed to me to all be, "because". — CpiralCpiral 01:30, 30 August 2012 (UTC)[reply]


The changes I made are the following:

  • Italics and different paragraph for the law in words.
  • Deleted the explanation in brackets in " Coulomb's constant (a proportionality factor sometimes called the electric force constant.) " and added a link to the article of Coulomb's constant.
  • I separated the explanation for the Coulomb's constant in a different section.
  • I deleted this paragraph totally:
In the more useful vector-form statement, the force in the equation is a vector force acting on either point charge, so directed as to push it away from the other point charge; the right-hand side of the equation, in this case, must have an additional product term of a unit vector pointing in one of two opposite directions, e.g., from q 1  to q 1  if the force is acting on q 2 ; the charges may have either sign and the sign of their product determines the ultimate direction of that force. Thus, the vector force pushing the charges away from each other (pulling towards each other if negative) is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. The square of the distance part arises from the fact that the force field due to an isolated point charge is uniform in all directions and gets "diluted" with distance as much as the area of a sphere centered on the point charge expands with its radius.
  • Changed the vector form of the law from:

where is the separation of the two charges.

to

where and is the electric constant.

  • Fixed two doubles .
  • Fixed the formula for the system:
  • Added the category Category:Article Feedback 5 Additional Articles.

--IngenieroLoco (talk) 09:27, 30 August 2012 (UTC)[reply]

After giving your Law section edits a once over, I think I can see your vision with your "entire section" for Coulomb's constant. If we do that then we might as well put the Electric field section next to it, and place them before the detailed math explanations. But then we needed to have the law in minimal word and math forms in the intro to the Law section. Finally, I made the scalar form an "entire sections" in its own right, just like the vector form has.

Then I revisited the layout of the entire article. Images were floating meaninglessly, unmentioned. The article needs fleshing out with much more text before it can improve further. — CpiralCpiral 21:41, 31 August 2012 (UTC)[reply]

[edit]

The words "tested heavily" currently link to "Precision Tests of QED". None of the tests listed there are tests of Coulomb's Law, although. This link needs to be fixed. — Preceding unsigned comment added by 18.111.69.134 (talk) 22:55, 30 August 2012 (UTC)[reply]

Coulomb's law of magnetostatics

[edit]

I am considering adding references to the magnetostatic version of Coulomb's law in this article. Any suggestions/questions about this? — Preceding unsigned comment added by Joseaugustocale (talkcontribs) 16:53, 14 March 2013 (UTC)[reply]

r sub 21?

[edit]

I understand I'm probably missing something here, but that's just the issue. I'm just a student studying electromagnetism in physics class, but it seems like this requires some explaining. In class, we just simply use Fe=(k)q1q2/r2 for our equations. There is no r21 to speak of. I did a little searching and found that someone commented, saying r21=r2-r1, but that's still very unclear for someone who's just looking at this for studying reasons. Can someone maybe add a clarification on the article? --76.118.133.93 (talk) 20:19, 17 April 2013 (UTC)[reply]

Hi! I read this and thought you just require a small clarification. Here it is: As force is a vector, so it requires a direction. But the formula you have given above contains all scalars, so it gives just the magnitude of that force. To get a vector, we multiply the magnitude of the vector with a unit vector specifying its direction. And in this case, to get a force vector, we multiply the force magnitude with a unit vector in the same direction as the force (r21 as shown in the diagram in the article). That’s the reason for using a new unit vector r21 here. I hope its clear now.
The formula you use in class is just the scalar form of Coulomb's law and it's also in the article. --IngenieroLoco (talk) 21:36, 17 April 2013 (UTC)[reply]

Potential versus Electric Field

[edit]

There is an showing both the potential and electric field however from the Article and the diagram, I'm not clear what the difference is. Please could someone clarify this? --Holyone2 (talk) 11:50, 30 May 2013 (UTC)animation[reply]

Reader feedback: if the charges are of unequa...

[edit]

39.54.170.102 posted this comment on 19 October 2012 (view all feedback).

if the charges are of unequal magnitude then the magnitude of the forces applied by one on other would be different,how would be that force calculated?


The forces will be the same and they can be calculated using the same formula, just replace q1 and q2 by the value of the charges in the formula.

IngenieroLoco (talk) 15:41, 9 July 2013 (UTC)[reply]

Electrostatic approximation/ Atomic forces

[edit]

The accuracy of Coulomb's law requires static point charges. The atomic forces section indicates that the law correctly predicts the interaction between the nucleons and the orbiting electrons, and, presumably, between the orbiting electrons themselves. Those orbiting electrons not only move much more rapidly than "slowly", but are spinning, and, in some cases, changing to excited states (among other things). This sounds like a contradiction. I'm assuming this means that the law applies, and correctly predicts the interactive electostatic force at any instant in time. If so, shouldn't that be clarified in the atomic forces section? — Preceding unsigned comment added by 70.231.130.70 (talk) 00:31, 29 December 2013 (UTC)[reply]

External link: video

[edit]

I removed an external link to a Youtube video that explains Coulomb's law; it seems to me counterproductive to link to a video from a page that claims to explain the same concept. (I don't mean by this, however, that Wikipedia should be a centrist (with regard to itself) information source—against to which the presence of an external link section at the bottom of the pages testify—although if the video itself is admissible (link here: https://www.youtube.com/watch?v=Q0Sz1B3DiSA) I think it should be included in an external link section at the bottom.)Luot (talk) 20:11, 2 May 2014 (UTC)[reply]

Error in the vector form in The Law section

[edit]

There is an r-hat where there should be an r, no? Otherwise the magnitude in the denominator should only be squared instead of cubed if we use the unit vector. — Preceding unsigned comment added by 209.129.29.2 (talk) 23:40, 17 February 2015 (UTC)[reply]

' Tentative evidence of infinite speed of propagation'

[edit]

The previous Wikipedia article had a section " Tentative evidence of infinite speed of propagation " . It referred to an experiment " Measuring propagation speed of Coulomb fields". ( http://arxiv.org/pdf/1211.2913v2.pdf ) Why is it removed?

[edit]

Hello fellow Wikipedians,

I have just modified one external link on Coulomb's law. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 16:13, 13 August 2017 (UTC)[reply]

Wrong QFT derivation.

[edit]

Hi Everyone,

This is my very first correction to a wiki page ever.

That being said, Here comes my point.

The Coulomb potential to which it is arrived at the end of the the QFT origin section of the wiki, is wrong. It has a minus sign that should not be there. This is easy to realize since two particles with same charge sign should repel each other and hence the potential should be repulsive. The Force, on the other hand, is correct, but because the connection with the potential (dV/dr) stated there is also wrong. It should be F=-dV/dr.

I cannot correct the derivation of the Coulomb potential from QFT, because it is not my field.

I recommend to amend it or remove it until corrected.

Fede.pont (talk) 21:03, 10 March 2018 (UTC)[reply]

Modification of opening sentence

[edit]

For the sake of accuracy and clarity, I would like to change the opening sentence (by adding the underlined and removing the struckthrough). Any objections? Sdc870 (talk) 21:18, 24 April 2018 (UTC)[reply]

Coulomb's law, or Coulomb's inverse-square law, is a law of physics that describes the magnitude of  force interacting between static electrically charged particles.
I personally object because when you say "magnitude", that implies only a positive Force, but the force can be positive or negative. Brian Everlasting (talk) 00:51, 25 April 2018 (UTC)[reply]
Fair enough. How about: Coulomb's law, or Coulomb's inverse-square law, is a law of physics that describes the magnitude and direction of force interacting between static electrically charged particles.
Sdc870 (talk) 01:45, 26 April 2018 (UTC)[reply]
Sounds great. But since vector basically means "magnitude and direction", why not say vector instead? Brian Everlasting (talk) 03:21, 26 April 2018 (UTC)[reply]
I understand the lead section should try to be accessible to the non-technical reader. Was trying to find a good balance. Meanwhile, your query has drawn my attention to the second sentence, which goes immediately to the scalar form (where just "magnitude" would be appropriate, and not "vector"). And the "vector" aspect is not marked clearly in the third sentence, but probably should be -- also to "signal" the content in the article. That sentence probably needs more work (e.g., to highlight the directional aspect) -- but I will not make any proposal for that sentence. This discussion inclines me toward the proposed change in the first sentence. Sdc870 (talk) 04:06, 26 April 2018 (UTC)[reply]
{{ec}} Words like "magnitude" and "direction" are more understandable by lay readers (see MOS:INTRO). As another alternative, how about "Coulomb's law, or Coulomb's inverse-square law, is a law of physics that describes amount of attractive or repulsive force interacting between static electrically charged particles."? There are only two possible "directions" (push vs pull), so we can be more specific about that detail. DMacks (talk) 04:09, 26 April 2018 (UTC)[reply]
@DMacks: Interesting comments. And now have studied MOS:FIRST. How about: "Coulomb's law, or Coulomb's inverse-square law, is a law of physics for finding the amount of force with which stationary electrically-charged particles repel or attract each other." ("with which" or "by which" ?) Sdc870 (talk) 19:05, 27 April 2018 (UTC)[reply]
That sounds fine (either "with" or "by"). I would prefer "describing" to "finding", since it's all about an empirical analysis of an existing natural fact rather than simply looking for it. DMacks (talk) 20:57, 27 April 2018 (UTC)[reply]
Last clarification: I share your "empirical analysis/natural phenomenon" distinction. How about: "...law of physics for quantifying the amount of..." Was not happy with ‟finding” either, but was trying to avoid "describes", which could be (mis)read to mean that the law is describing the force (or amount of force) as a visible object. Perhaps ‟quantifying” is more technical – but still within the space of ‟high school readers”? Sdc870 (talk) 12:19, 29 April 2018 (UTC)[reply]

Hello, I just modified the opening paragraph of the article, then thought after the fact about checking the talk page! I tried to preserve this opening sentence in general, but split it to clarify electrostatic force, which, IMO, should have its own article, but I (sociologist) am not the one to write it. I certainly appreciate your concern to make at least that sentence clear to the general reader. A shame a bit more of the article couldn't follow suit. I would love to learn more about the sciences, but find frequently when I follow links, that terms aren't clearly defined at the level of a lay reader, or are imprecisely defined and thus misleading, or articles jump into formulas and highly technical jargon immediately, without providing any context. Anyway, please review, and let me know if you have any problems with it. Peacedance (talk) 18:54, 5 January 2019 (UTC)[reply]

Problems with opening paragraph

[edit]

A valid point was raised, that "electrostatic force" is redirected to this page, without any clear explanation of this term. But the changes introduced in the opening paragraph (see previous section for explanation) to solve that problem have created many new problems. Here is a proposal for a replacement to that opening paragraph, which also addresses the definition of "electrostatic force" (The numbers indicate source citations, mostly from standard physics textbooks.)

Coulomb's law, or Coulomb's inverse-square law, is a law of physics for quantifying the amount of force between two stationary, electrically charged particles. The electric force between charged bodies at rest is conventionally called electrostatic force[1] or Coulomb force.[2] The quantity of electrostatic force between stationary charges is always described by Coulomb’s law.[3] The law was first published in 1785 by French physicist Charles-Augustin de Coulomb, and was essential to the development of the theory of electromagnetism, because it was now possible to discuss quantity of electric charge in a meaningful way.[4]

This replacement opening paragraph would be followed by the current next paragraph, which starts "In its scalar form, the law is:" Sdc870 (talk) 02:19, 8 March 2019 (UTC)[reply]

Misquote

[edit]

The last of the opening paragraphs states "The law has been tested extensively, and observations have upheld the law on a scale from 10^−16 m to 10^8 m", but this misquotes the cited reference for the lower bound. The reference states that the bounds are possible areas where the law MAY break down (if there are limits to it), but only confirms a high bound (Jupiter, at 10^8m). For a lower bound, there should be another reference. — Preceding unsigned comment added by 47.221.136.208 (talk) 05:19, 17 July 2019 (UTC)[reply]

Coulomb's law IS NOT DERIVED FROM QUANTUM MECHANICS. improper "show stealing" QED

[edit]

"n simple terms, the Coulomb potential derives from the QED Lagrangian as follows. The Lagrangian of quantum electrodynamics is normally written in natural units, but in SI units, it is:"

Coulomb's law is not unique - Newton's law of inverse square law of gravity was not unique (inverse square relationships and vector math were already known - but perhaps not applied to measure falling objects). Vector maths go as far back as Ancient Greek and 16th and 17th century influences.

Coulomb's only provided a popular experiment that proved what others had suspected: but it was not good enough - the question then became under which conditions the law held true (such as if charge was or was not unitized still at very high or low temperatures)

Quantum mechanics only mathematically describes "all possibilities of what is not completely understood" (the niels bohr atom is not agreed on or understood - nor may it ever be) (without statistics when possible)

Quantum mechanics has often said "it knew how many basic particles there are" only to eat their words and revise it later.

The quantum mechanic equation shown describes a PARTIAL review (perhaps highly partial) of particle collider data which includes Coulomb's law and another not yet well proven factor. however the quantum is only mimiced the principles behind it are only being guessed at: as a whole model there are a few quantum models and none of them describe the data completely and the reason why is not yet known.

Coulomb's law IS NOT DERIVED FROM QUANTUM MECHANICS. QED (that which was demonstrated quod et demonstradum)

I don't fully understand how the second and third paragraphs are relevant to the objection. But regarding the last two paragraphs, the point of that section is not contingent upon Quantum Electrodynamics being complete, but essentially tries to prove that everything explained by Coulomb's law is also explained by QED, because QED reduces to Coulomb's law in the classical limit and static magnetic fields (i.e. full QED calculations and Coulomb's law are in pretty good agreement under certain conditions). Obviously Coulomb's law preceded QED, but one can still derive it from QED. --Lukflug (talk) 18:22, 29 April 2021 (UTC)[reply]

Dissimilar or Discrete

[edit]

An IP editor changed the title of section "System of discrete charges" to "System of dissimilar charges". To my understanding, "dissimilar" means "not the same", so dissimilar charges would have to be positive versus negative. But I think this section relates to a lot of individual charges in different places (i.e. discrete charges). Therefore I have reverted the edit by the IP editor. This is, however, not my field, so if I'm wrong, please could whoever reverts me add an explanation here of what they're doing, and why, so no one else blunders into making my mistake. Many thanks! Elemimele (talk) 12:26, 26 June 2021 (UTC)[reply]

what about time delay of the Electric Field? Effects are not instantaneous, limited by c.

[edit]

what about time delay of the Electric Field? Effects are not instantaneous, limited by c. Robins Kumar Sah (talk) 05:50, 22 March 2022 (UTC)[reply]

It is discussed under the heading Limitations. --Jähmefyysikko (talk) 14:56, 22 March 2022 (UTC)[reply]

Coulomb's Law

[edit]

The forces' of attraction or repulsion between two points charges in a particular medium is directly proportional to the product of the charges and inversely proportional to the square of the distance between them and the force of acts along the straight line connecting them. 103.200.94.249 (talk) 13:13, 2 October 2022 (UTC)[reply]

equation oe coulumbs law

[edit]

a 182.189.124.69 (talk) 20:55, 4 November 2022 (UTC)[reply]

Vector Notation

[edit]

In Section 3 Vector Form of the Law it is said that r12 represents a vector from q2 to q1. In slightly more usual conventions, isn't this vector more commonly written as r21? Bear 5227 (talk) 18:59, 27 January 2023 (UTC)[reply]

Physics

[edit]

Good luck 🍀 102.85.180.128 (talk) 19:42, 23 February 2023 (UTC)[reply]

It may not be related to the article but whatever here's the fortune coin good luck and hope you do well! ☀DefenderTienMinh⛤☯☽ (talk) 17:02, 24 July 2023 (UTC)[reply]

Coulomb potential: under QFT

[edit]

The equation show V=e^2/( 4 pi r). Check me here, but V is proportional to e, not e^2??? Olness (talk) 16:01, 27 September 2023 (UTC)[reply]