Jump to content

Template:Chembox Properties/doc

From Wikipedia, the free encyclopedia

Usage

[edit]

This box can be used as a complete section inside the {{chembox}}. Copy the left column into an existing Chembox.

| Section2={{Chembox Properties
| Properties_ref = 
| Formula = 
| Formula_ref = 
| Formula_Comment = 
| C= | H= | N= <!--(etc)-->
| Formula_Charge =
| MolarMass =
| MolarMassRound =
| MolarMass_ref = 
| MolarMass_notes = 
| Appearance = 
| Odor = | Odour = 
| Density = 
| MeltingPt =
| MeltingPtC =
| MeltingPtF =
| MeltingPtK =
| MeltingPt_ref =
| MeltingPt_notes =
| BoilingPt =
| BoilingPtC =
| BoilingPtF =
| BoilingPtK =
| BoilingPt_ref =
| BoilingPt_notes =
| CriticalTP =
| SublimationConditions = 
| Solubility = 
| SolubilityProduct = 
| SolubilityProductAs = 
| SolubleOther = 
| Solvent = 
| Solubility1 = 
| Solvent1 = 
| Solubility2 = 
| Solvent2 = 
| Solubility3 = 
| Solvent3 = 
| Solubility4 = 
| Solvent4 = 
| Solubility5 = 
| Solvent5 =
| Solubility6 = 
| Solvent6 =
| CMC =
| HLB =
| LogP = 
| VaporPressure = 
| HenryConstant = 
| AtmosphericOHRateConstant = 
| pKa = 
| pKb = 
| ConjugateAcid =
| ConjugateBase =
| IsoelectricPt = 
| ElectricalResistivity =
| LambdaMax = 
| Absorbance = 
| BandGap = 
| ElectronMobility = 
| SpecRotation = 
| MagSus = 
| ThermalConductivity = 
| RefractIndex = 
| Viscosity = 
| CriticalRelativeHumidity = 
| Dipole = 
| OrbitalHybridisation = 
| SpecificSurfaceArea = 
| PoreVolume = 
| AveragePoreSize = 
  }}
{{Chembox Properties}} - incomplete list
Reference
Chemical formula
 reference
 comment
 per element (alternative input)
 molecule charge
MolarMass
MolarMassRound
MolarMass_ref
MolarMass_notes
Appearance
Odor, Odour
Density
MeltingPt, any text
Number, in Celsius. Is converted to F and K
 Also possible: MeltingPtF=, or MeltingPtK=
 
 
 
BoilingPt, any text
Number, in Celsius. Is converted to F and K
 Also possible: BoilingPtF=, or BoilingPtK=
 
 
Critical temperature and pressure
SublimationConditions
Solubility in water (Aqueous solution)
SolubilityProduct
SolubilityProductAs
SolubleOther
Solvent
Solubility1
[[{{{Solvent1}}}]]
Solubility2
[[{{{Solvent2}}}]]
Solubility3
[[{{{Solvent3}}}]]
Solubility4
[[{{{Solvent4}}}]]
Solubility5
[[{{{Solvent5}}}]]
Solubility6
[[{{{Solvent6}}}]]
 Critical micelle concentration (units must be manually inserted)
 Hydrophilic-lipophilic balance (units must be manually inserted)
LogP
VaporPressure
HenryConstant
AtmosphericOHRateConstant
pKa
pKb
Conjugate acid
Conjugate base
IsoelectricPt
ElectricalResistivity
LambdaMax
Absorbance
BandGap
ElectronMobility
SpecRotation
MagSus
ThermalConductivity
RefractIndex
Viscosity
CriticalRelativeHumidity
Dipole
OrbitalHybridisation
SpecificSurfaceArea
PoreVolume
AveragePoreSize
 

Chemical formula

[edit]

Chemical formula by element:

 | C= | H= | N= | O= (etc., 118 elements)
 | Formula_Charge= 
 | Formula_ref=
 | Formula_Comment

OR hardcoded (formula input will show unedited)

 | Formula= 
 | Formula_ref=
 | Formula_Comment=

Temperatures

[edit]

Temperatures for both for the melting point and boiling point can be entered in multiple ways. |MeltingPt= and |BoilingPt= allow any textual input. E.g.:

|MeltingPt=Unknown shows: Unknown

When supplying a temperature value (the numerical value in either °C, °F or K), the infobox will calculate and present all three temperatures. Only one of the three _C, _F, _K values may be entered. E.g.:

|MeltingPtC=100 shows: 100 °C; 212 °F; 373 K

To show a temperature range, simply add the corresponding _CH high value (_FH, _KH). E.g.:

|MeltingPtF=50 |MeltingPtFH=75 shows 10 or 24 °C; 50 or 75 °F; 283 or 297 K

All available temperature parameters:

| MeltingPt
| MeltingPtC
| MeltingPtF
| MeltingPtK
| MeltingPt_ref
| MeltingPt_notes

| BoilingPt
| BoilingPtC
| BoilingPtF
| BoilingPtK
| BoilingPt_ref
| BoilingPt_notes
  • Any text, shown literally
  • Prefix before calculations
  • Temperature in Celsius; numerical
  • Temperature in Fahrenheit; numerical
  • Temperature in Kelvins; numerical
  • Reference
  • Any text added as a postfix
  • Any text, shown literally
  • Prefix
  • Temperature in Celsius; numerical
  • Temperature in Fahrenheit; numerical
  • Temperature in Kelvins; numerical
  • Reference
  • Any text added as a postfix

Example

[edit]
  • Ammonia (and some exemplary additions)
Ammonia
Properties
NH3
Molar mass 17.031 g·mol−1
Appearance Colourless gas
Odor Strong pungent odor
Density 0.86 kg·m−3 (1.013 bar at boiling point)
0.73 kg·m−3 (1.013 bar at 15 °C)
681.9 kg·m−3 at −33.3 °C (liquid)
Melting point −77.73 °C (−107.91 °F; 195.42 K)
Boiling point −33.34 °C (−28.01 °F; 239.81 K)
  • 47% (0 °C)
  • 31% (25 °C)
  • 28% (50 °C)[1]
Solubility Soluble in chloroform, ether, ethanol, methanol
log P logP
Vapor pressure 8573 hPa
Acidity (pKa) 32.5 (−33 °C),[2] 10.5 (DMSO)
Basicity (pKb) 4.75
1.3327
Viscosity 0.276 cP (−40 °C)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
{{Chembox
| Name = Ammonia
|Section2 = {{Chembox Properties
| Formula = NH<sub>3</sub>
| MolarMass = 17.031{{nbsp}}g·mol<sup>−1</sup>
| Appearance = Colourless gas
| Odor = Strong pungent odor
| Density = 0.86&nbsp;kg·m<sup>−3</sup> (1.013{{nbsp}}bar at boiling point)<br
/>0.73&nbsp;kg·m<sup>−3</sup> (1.013{{nbsp}}bar at 15&nbsp;°C)<br
/>681.9&nbsp;kg·m<sup>−3</sup> at −33.3&nbsp;°C (liquid)
| MeltingPtC = −77.73
| BoilingPtC = −33.34
| Solubility = {{ubl
 | 47% (0&nbsp;°C)
 | 31% (25&nbsp;°C)
 | 28% (50&nbsp;°C)<ref>{{cite book |url=https://books.google.com/?id=0fT4wfhF1AsC&pg=PA17 |page=17 |title=Handbook of inorganic compounds |last1=Perry |first1=Dale L. |last2=Phillips |first2=Sidney L. |publisher=CRC Press |year=1995 |isbn=0-8493-8671-3 }}</ref>
 }}
| SolubleOther = soluble in [[chloroform]], [[ether]], [[ethanol]], [[methanol]]
| Solvent =
| pKa = 32.5 (−33&nbsp;°C),<ref>Perrin, D. D.; ''Ionisation Constants of Inorganic Acids and Bases in Aqueous Solution'', 2nd ed., Oxford: Pergamon Press, '''1982'''</ref> 10.5 (DMSO)
| pKb = 4.75
| RefractIndex = 1.3327
| Viscosity = 0.276&nbsp;cP (−40&nbsp;°C)
| VaporPressure = 8573&nbsp;hPa
| LogP = logP
  }}
}}

Tracking category

[edit]

TemplateData

[edit]
TemplateData documentation used by VisualEditor and other tools
See a monthly parameter usage report for Template:Chembox Properties in articles based on its TemplateData.

TemplateData for Chembox Properties

Adds a subsection to {{Chembox}}. To be used: |Section2={{Chembox Properties|...}}

Template parameters

ParameterDescriptionTypeStatus
ExactMassExactMass

no description

Unknownoptional

See also

[edit]

References

  1. ^ Perry, Dale L.; Phillips, Sidney L. (1995). Handbook of inorganic compounds. CRC Press. p. 17. ISBN 0-8493-8671-3.
  2. ^ Perrin, D. D.; Ionisation Constants of Inorganic Acids and Bases in Aqueous Solution, 2nd ed., Oxford: Pergamon Press, 1982