Jump to content

USCGC Point Comfort

From Wikipedia, the free encyclopedia
Point Comfort in 1965
History
United States
NameUSCGC Point Comfort (WPB-82317)
NamesakeOld Point Comfort, Virginia
OwnerUnited States Coast Guard
BuilderCoast Guard Yard, Curtis Bay, Maryland
Commissioned24 May 1961
Decommissioned17 November 1969
Honors and
awards
FateTransferred to Republic of Vietnam Navy as RVNS Đào Thức (HQ-704), 17 November 1969[1]
General characteristics
TypePatrol Boat (WPB)
Displacement60 tons
Length82 ft 10 in (25.25 m)
Beam17 ft 7 in (5.36 m) max
Draft5 ft 11 in (1.80 m)
Propulsion2 × 600 hp (447 kW) Cummins diesel engines
Speed16.8 knots (31.1 km/h; 19.3 mph)
Range
  • 577 nmi (1,069 km) at 14.5 kn (26.9 km/h; 16.7 mph)
  • 1,271 nmi (2,354 km) at 10.7 kn (19.8 km/h; 12.3 mph)
Complement
  • Domestic service : 8 men
  • Vietnam service : 2 officers, 8 men
Armament

USCGC Point Comfort (WPB-82317) was an 82-foot (25 m) Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1961 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1961 was not to name cutters under 100-foot (30 m) in length, it was designated as WPB-82317 when commissioned and acquired the name Point Comfort in January 1964 when the Coast Guard started naming all cutters longer than 65-foot (20 m).[5][6]

Construction and design details

[edit]

Point Comfort was built to accommodate an 8-man crew.[7] She was powered by two 600 hp (447 kW) VT600 Cummins diesel main drive engines and had two five-bladed 42 in (1.1 m) propellers. The main drive engines were later replaced by 800 hp (597 kW) VT800 Cummins engines. Water tank capacity was 1,550 U.S. gallons (5,900 L) and fuel tank capacity was 1,840 U.S. gallons (7,000 L) at 95% full.[5][7] Engine exhaust was ported through the transom rather than through a conventional stack and this permitted a 360 degree view from the bridge; a feature that was very useful in search and rescue work as well as a combat environment.[8]

The design specifications for Point Comfort included a steel hull for durability and an aluminum superstructure and longitudinally framed construction was used to save weight. Ease of operation with a small crew size was possible because of the non-manned main drive engine spaces. Controls and alarms located on the bridge allowed one man operation of the cutter thus eliminating a live engineer watch in the engine room.[8] Because of design, four men could operate the cutter; however, the need for resting watchstanders brought the crew size to eight men for normal domestic service.[8] The screws were designed for ease of replacement and could be changed without removing the cutter from the water. A clutch-in idle speed of three knots helped to conserve fuel on lengthy patrols and an eighteen knot maximum speed could get the cutter on scene quickly.[9] Air-conditioned interior spaces were a part of the original design for the Point class cutter. Interior access to the deckhouse was through a watertight door on the starboard side aft of the deckhouse. The deckhouse contained the cabin for the officer-in-charge and the executive petty officer.[9] The deckhouse also included a small arms locker, scuttlebutt, a small desk and head. Access to the lower deck and engine room was down a ladder. At the bottom of the ladder was the galley, mess and recreation deck. A watertight door at the front of the mess bulkhead led to the main crew quarters which was ten feet long and included six bunks that could be stowed, three bunks on each side. Forward of the bunks was the crew's head complete with a compact sink, shower and commode.[9] Accommodations for a 13-man crew were installed for Vietnam service.[5][6][10][11]

History

[edit]

After delivery in 1961, Point Comfort was assigned a homeport of Benicia, California, where she served as a law enforcement and search and rescue patrol boat.[5]

At the request of the United States Navy, in April 1965, she was alerted for service in South Vietnam and assigned to Coast Guard Squadron One in support of Operation Market Time along with 16 other Point class cutters.[12][13] While the crew completed overseas training and weapons qualifications at Coast Guard Island and Camp Parks, California, Point Comfort was loaded onto a merchant ship, and transported to Subic Bay, Philippines in May 1965 where she was refitted for combat service.[5] Shipyard modifications included installation of new single-sideband radio equipment, additional floodlights, small arms lockers, additional sound-powered phone circuits, and the addition of four M2 machine guns. The original bow mounted machine gun was replaced with a combination over-under .50 caliber machine gun/81mm trigger fired mortar that had been developed by the Coast Guard for service in Vietnam.[4][5][14][15] For service in Vietnam, two officers were added to the crew complement to add seniority to the crew in the mission of interdicting vessels at sea.[16]

Gun crew aboard USCGC Point Comfort (WPB-82317) firing 81mm mortar during bombardment of suspected Viet Cong staging area one mile behind An Thoi, August 1965

Point Comfort was assigned to Division 11 of Squadron One to be based at An Thoi Naval Base on the southern tip of Phú Quốc island along with USCGC Point Banks, USCGC Point Clear, USCGC Point Garnet, USCGC Point Glover, USCGC Point Grey, USCGC Point Marone, USCGC Point Mast and USCGC Point Young. After sea trials, the Division left Subic Bay for An Thoi on 17 July 1965 in the company of USS Floyd County, their temporary support ship. After almost two weeks at sea, they arrived at their new duty station on 1 August and began patrolling the waters in the Gulf of Thailand near the Cà Mau Peninsula.[17] Duty consisted of boarding Vietnamese junks to search for contraband weapons and ammunition and check the identification papers of persons on board. During one such boarding evolution on 7 August, Point Comfort came under fire from the shoreline in her first battle confrontation. A United States Air Force L-19 spotter plane attempted to warn Point Comfort of a Viet Cong (VC) machine gun nest near their position along the shoreline, but had no way to communicate with her except by flares dropped from the aircraft. The cutter crew didn't understand what was happening until they came under fire from the VC gun position. Radio communications procedures were improved after this incident.[18] During September 1965, USS Krishna, a repair ship outfitted for the repair of WPB's relieved the USS Floyd County. Also during this time, the WPB's were directed to paint the hulls and superstructures formula 20 deck gray to cover the stateside white paint. This increased the effectiveness of night patrols.[19]

Point Comfort along with Point Grey assisted Special Forces and Civilian Irregular Defense Group (CIDG) personnel in a raid of Hon Mot Island on 27 September 1965 providing transportation and medical evacuation for the raiding party.[20]

On 17 November 1969, Point Comfort was turned over to the Republic of Vietnam Navy as part of the Vietnamization of the war effort and recommissioned as RVNS Đào Thức (HQ-704).[1][5] It was decommissioned concurrent with the surrender of South Vietnam in 1975 and scrapped.

References

[edit]
Notes
  1. ^ a b Scotti, p 209
  2. ^ "Presidential Unit Citation (Navy)". Mobile Riverine Force Association. Archived from the original on 28 September 2011. Retrieved 16 May 2011.
  3. ^ "Navy Unit Commendation". Mobile Riverine Force Association. Archived from the original on 22 January 2002. Retrieved 16 May 2011.
  4. ^ a b William R. Wells II, The United States Coast Guard's Piggyback 81mm Mortar/.50 cal. machine gun, Vietnam Magazine, August 1997
  5. ^ a b c d e f g Coast Guard Historian website
  6. ^ a b Scheina, p 72
  7. ^ a b Scheina, p 71
  8. ^ a b c Scotti, p 165
  9. ^ a b c Scotti, p 166
  10. ^ Scotti, p 10
  11. ^ Scotti, p 219
  12. ^ Larzelere, p 13
  13. ^ Cutler, p 84
  14. ^ Larzelere, p 21
  15. ^ Cutler, p 82
  16. ^ Larzelere, p 15
  17. ^ Larzelere, p 51
  18. ^ Larzelere, p 52
  19. ^ Larzelere, p 54
  20. ^ Larzelere, p 55
Bibliography
[edit]